Author Index

A

  • Aalam Hakkakan, H. A. Non-linear analysis of FG beam-based double-movable-electrode MEMS [Volume 10, Issue 2, 2020, Pages 111-126]
  • Abadi, M. Thermal Response Analysis of Lock-in Thermography Test to Identify the Delamination in Composite Materials [Volume 6, Issue 3, 2016, Pages 119-136]
  • Abbariki, Gh. Sensitivity Analysis and optimization of the Inducer in a Rotary Gas Separator of Electrical Submersible Pump under single phase and two phase conditions [Volume 8, Issue 3, 2018, Pages 289-302]
  • Abbasi, A. Sensitivity Analysis of Maneuverability of an AUV to Added Mass Coefficients Variations [Volume 9, Issue 2, 2019, Pages 1-13]
  • Abbasi, E. Design of hybrid control system for path tracking of a quadrotor subject to uncertain disturbances [Volume 11, Issue 5, 2021, Pages 17-32]
  • Abbasi, M. Numerical investigation of nano-fluid flow on micro channel heat sink efficiency using the Taguchi method [Volume 7, Issue 1, 2017, Pages 275-287]
  • Abbasi, S. Experimental and Numerical Investigation of grooved shroud Effects on Tip Leakage Fluctuation in an axial compressor [Volume 7, Issue 4, 2018, Pages 267-278]
  • Abbasi, S. Aerodynamic Design of a transonic axial Fan with Low Aspect Ratio and Validating [Volume 9, Issue 1, 2019, Pages 251-264]
  • Abbasi, sarallah Effect of Tip Injection on Tip Leakage Flow Structure in Axial Compressor [Volume 12, Issue 5, 2022, Pages 147-160]
  • Abbasi, Sseyyed H. Numerical study of flow characteristics in a single-element Lean Direct Injection (LDI) combustion chamber [Volume 10, Issue 4, 2021, Pages 287-302]
  • Abbasian, Mohammad Hossein Investigating the influence of bearings elastic properties on nonlinear dynamics of unbalanced induction motors shaft in presence of asymmetric magnetic pull [Volume 13, Issue 5, 2023, Pages 137-153]
  • Abbasnia, A. Estimation of stress concentration factor of composite lamina with triangular hole using multiple linear regression [Volume 8, Issue 2, 2018, Pages 25-36]
  • Abbaspour, A. Stress and Strain Analysis of Femur in Taylor Spatial Frame [Volume 8, Issue 1, 2018, Pages 13-21]
  • Abbaspour Sani, E. Design and simulation of a two-axis thermal MEMS accelerometer with optimized sensitivity [Volume 8, Issue 2, 2018, Pages 13-24]
  • Abbasszadeh Rad, A.H. The Effect of the Kind of Attachment of Primary Cilium to Cell in Its Response to the Fluid Flow: A 3D Computational Simulation [Volume 8, Issue 1, 2018, Pages 203-213]
  • Abbaszadeh, B. Numerical and experimental investigation of deformation length in flexible roll forming process [Volume 11, Issue 6, 2022, Pages 1-14]
  • Abbaszadeh Bidokhti, A. Modeling of Mixed Mode Fracture Tests Using Extended Finite Element Method [Volume 5, Issue 2, 2015, Pages 123-137]
  • Abdi Elmi, E. Numerical study of the effect of phase change materials containing multi-walled carbon nanotubes on improving the heat sink performance of electrical equipment [Volume 13, Issue 1, 2023, Pages 25-41]
  • Abdini, A. Numerical calculation of the shear stresses in torsion problem of prismatic bars using collocated discrete least squares method [Volume 5, Issue 4, 2016, Pages 47-54]
  • Abdolalipouradl, M. Energy and exergy analyses of various configures for combined flash-binary cycles using Sabalan geothermal wells [Volume 9, Issue 4, 2019, Pages 237-249]
  • Abdollahi, H. Effect of SiO2/Al to increase microcantilever infrared detectors sensitivity and compare with Si3N4/Au [Volume 5, Issue 3, 2015, Pages 151-163]
  • Abdollahi, H. Design and fabrication of optimized gold micro-heater and comparison of its performance with platinum micro-heater [Volume 6, Issue 1, 2016, Pages 259-272]
  • Abdollahi, H. Investigation of metallurgical and mechanical properties of TIG welded parts for material replacement [Volume 7, Issue 4, 2018, Pages 87-95]
  • Abdollahi, M. Effect of functionalized Graphene Nanoplates on the Mechanical Properties of Vinil Ester/ Glass Fibers Compositete [Volume 10, Issue 4, 2021, Pages 1-14]
  • Abdollahi, M. Investigation of Microstructure and Mechanical Behavior of Al/SiC/CNT Surface Composite Fabricated by Friction Stir Processing [Volume 11, Issue 6, 2022, Pages 219-233]
  • Abdollahian, Mohammad Buckling of an embedded piezoelectric nanobeam based on strain gradient and Reddy beam theories [Volume 4, Issue 3, 2014, Pages 23-33]
  • Abdollahi Azghan, M. The effective parameters on shear properties of sandwich panels with glass fibers-vinyl ester composite skin and polyvinyl chloride core [Volume 10, Issue 1, 2020, Pages 53-64]
  • Abdollahi far, A. Elasto-plastic time dependent impact analysis of high speed projectile on water surface [Volume 6, Issue 3, 2016, Pages 281-298]
  • Abdollahi Jahdi, M. H. Shock capturing method by numerical dissipation control on symmetric airfoil [Volume 6, Issue 1, 2016, Pages 285-304]
  • Abdollahi Jahdi, M. H. Analysis of natural convection of hydromagnetic fluid contains micro-particles in a infinite vertical channel [Volume 10, Issue 3, 2020, Pages 281-294]
  • Abdolmaleki, Arash Vibration Analysis of Circular Nanoplates under Nonlinear Electrostatic Excitation Considering the Surface Energy and Size Effects [Volume 12, Issue 5, 2022, Pages 133-146]
  • Abdolmanafi, A. Analytical and numerical investigation of cylindrical energy absorbers with functionally graded thickness [Volume 10, Issue 3, 2020, Pages 91-102]
  • Abdolmohammadi, M. Design, Fabrication and Control of a New Type of The Omnidirectional Spherical Wrist [Volume 8, Issue 2, 2018, Pages 1-11]
  • Abdul A meer, Sabah Experimental study of solar collector with helical coil [Volume 12, Issue 5, 2022, Pages 283-292]
  • Abdullah, A. Experimental investigation of vibrational mode shape influence on compression behaviour of Ti-6Al-4V alloy under superimposed ultrasonic vibration [Volume 12, Issue 4, 2022, Pages 55-68]
  • Abedi, H. Investigation of Microstructure and Mechanical Behavior of Al/SiC/CNT Surface Composite Fabricated by Friction Stir Processing [Volume 11, Issue 6, 2022, Pages 219-233]
  • Abedi, M. Identification of Stiffness and Damping Coefficients of Beams Supports [Volume 6, Issue 1, 2016, Pages 43-60]
  • Abedi, M. Dimensional characteristic of glass/epoxy composite plate with edge notch under wet freeze-thaw cycles [Volume 10, Issue 3, 2020, Pages 219-231]
  • Abedi, Sh. Development of a suitable numerical solution algorithm for the two-phase Euler-Lagrange approach with four way coupling in spray simulation [Volume 12, Issue 4, 2022, Pages 133-144]
  • Abedini, R. Experimental investigation of vibrational mode shape influence on compression behaviour of Ti-6Al-4V alloy under superimposed ultrasonic vibration [Volume 12, Issue 4, 2022, Pages 55-68]
  • Abedini, V. Investigation of single point incremental forming parameters effect on the blanks produced by friction stir welding [Volume 8, Issue 4, 2019, Pages 85-96]
  • Abedini Esfahlani, Ahad Investigating the ground effect on aerodynamic characteristics of airfoil in oscillatory flow [Volume 5, Issue 3, 2015, Pages 185-196]
  • Abedinzadeh Shahri, M. Adaptive Fuzzy Control of a Mobile Manipulator Robot [Volume 5, Issue 2, 2015, Pages 17-27]
  • Abnili, M. Robust adaptive control of the spacecraft formation flying in elliptical orbit with high eccentricity [Volume 7, Issue 3, 2017, Pages 83-96]
  • Abolbashari, M. H. Design optimization of 2D continuum structures using an efficient simulated annealing algorithm [Volume 6, Issue 4, 2016, Pages 41-48]
  • Abolbashari, M. H. Optimization of End milling process for minimizing surface roughness with combined artificial Neural Network and Genetic Algorithm [Volume 7, Issue 2, 2017, Pages 81-91]
  • Abolbashari, M. H. Reliability-Based Design Optimization of Columns under Buckling Load [Volume 11, Issue 5, 2021, Pages 49-62]
  • Abolbashari, M.H. Simulation, analysis and optimization of airplane wing leading edge structure against bird strike [Volume 6, Issue 3, 2016, Pages 17-32]
  • Abolghasemi, A. Investigation of springback behavior of fibre-metal laminates using equivalent-layer and separate-layer theories [Volume 6, Issue 4, 2016, Pages 1-9]
  • Abolghasemi Golafshani, H. Numerical Study of the Effect of Passive Counter Rotating Vanes Vortex Generator on NACA 2412 Airfoil [Volume 11, Issue 6, 2022, Pages 235-252]
  • Abootorabi, M. M. Determination of Stability Regions of Wheel and Workpiece in Plunge Grinding Process Using a 3-D Workpiece Model [Volume 7, Issue 3, 2017, Pages 67-82]
  • Abotalebi, A. Investigation of Internal Flow of Binary Gas in a Rotating Cylinder Using Direct Simulation Monte-Carlo (DSMC) [Volume 5, Issue 2, 2015, Pages 261-270]
  • Abshahi pour, Ali Numerical analysis of fluid flow and combined natural and force convection heat transfer for nanofluid in concentric /eccentric rotating cylinders [Volume 13, Issue 5, 2023, Pages 77-89]
  • Adamian, A. Vibration analysis of multi-directional functionally graded nanoplates with initial geometric imperfection using quasi-3d theory based on an isogeometric approach [Volume 11, Issue 6, 2022, Pages 111-126]
  • Adhami, H. The effect of aspect ratio of model to prtotypein the load acting on cylinderin free surface problems [Volume 6, Issue 4, 2016, Pages 317-328]
  • Adibi, T. A novel multidimensional characteristic modeling of incompressible convective heat transfer [Volume 5, Issue 4, 2016, Pages 283-296]
  • Adnian Arani, H. Numerical investigation of sensitivity of AUV dynamic coefficients and added mass to variations in amplitude and frequency of excitation [Volume 10, Issue 4, 2021, Pages 195-208]
  • Adollahi, Reza Numerical Study of Thermo Hydraulic Effect of Wire Wrap Spacer with Different Pitch in Hexagonal Fuel Assembly [Volume 12, Issue 6, 2023, Pages 205-217]
  • Aeini, M. A study on the ballistic performance of single-layered and multi-layered structures impacted by spherical rigid projectile: experimental investigation and modelling [Volume 10, Issue 4, 2021, Pages 125-143]
  • Afifi, A. Design and fabrication of optimized gold micro-heater and comparison of its performance with platinum micro-heater [Volume 6, Issue 1, 2016, Pages 259-272]
  • Afkhami, S. Parametric Analysis of Subsurface Hydrofoil with Boundary Elements Method [Volume 6, Issue 2, 2016, Pages 213-226]
  • Afrand, M. Experimental Investigation of the Effect of Location of Cylindrical Protuberance on the Thrust Vector of a Supersonic C-D nozzle [Volume 9, Issue 1, 2019, Pages 237-249]
  • Afrasiab, Hamed Failure prediction in defective pipelines using finite element simulation of fluid-structure interaction and neural network method [Volume 13, Issue 5, 2023, Pages 105-120]
  • Afrousheh, M. Improve the Crashworthiness Properties of AA7075 Tube under Axial Impact Loading by Geometrical Change [Volume 9, Issue 1, 2019, Pages 55-69]
  • Afshadfard, A. An Investigation for Nonlinear Dynamic Behavior of Flange Joints Under Lateral Loading [Volume 7, Issue 4, 2018, Pages 35-48]
  • Afsharfard, A. Analytical and Experimental Investigation for Nonlinear Behavior of Flange Joints Under Axial and Lateral Loading [Volume 6, Issue 3, 2016, Pages 43-54]
  • Afshari, A. Numerical Investigation of the Effect of Different Inflow Conditions on Turbulent Boundary Layer Flow Characteristics using Large-Eddy Simulation [Volume 9, Issue 2, 2019, Pages 261-274]
  • Afshari, E. Numerical Simulation of Wind Interference Effects Around a Group of Tall Buildings [Volume 5, Issue 2, 2015, Pages 285-301]
  • Afshari, E. Study of porous media usage in the performance of tubular heat exchanger in Continuous hydrothermal flow synthesis method [Volume 5, Issue 4, 2016, Pages 177-186]
  • Afshari, Ebrahim Effect of GDL porosity and pressure on the PEM fuel cell performance with honeycomb flow-field [Volume 3, Issue 3, 2013, Pages 109-119]
  • Afshari, Ebrahim A study on performance of different cooling flow fields with parallel channels in polymer electrolyte membrane fuel cell [Volume 4, Issue 3, 2014, Pages 109-121]
  • Afshari, Ebrahim Comparison of PEM Fuel Cell Performance with Metal Foam and Parallel Channel as Flow-Field Gas Distributor [Volume 4, Issue 3, 2014, Pages 123-136]
  • Afshin, H. Airfoil Profile Reformation of Bladeless Fan and Investigation of Flow Increase Curve [Volume 5, Issue 2, 2015, Pages 169-179]
  • Afshin, H. Comparative Study of Carbone Monoxide and Temperature Vertical Distribution in Tunnel Fires [Volume 5, Issue 4, 2016, Pages 1-13]
  • Afshin, H. Numerical Study of Carbon Monoxide and Temperature Distribution in Tunnel Fires Employing Air Curtain [Volume 5, Issue 3, 2015, Pages 235-246]
  • Afshin, H. Investigation of the effect of several impressive parameters on fire extinguishing in a progressive coal tunnel [Volume 12, Issue 4, 2022, Pages 117-131]
  • Afshin, Hossein Investigating the Effect of Opening Aspect Ratio and Combustion Source Conditions on Behavior of Backdraft Phenomenon by Large Eddy Simulation [Volume 11, Issue 3, 2021, Pages 165-179]
  • Afshin, S. Numerical and Experimental Analysis of Spring-back Defect in Flexible Roll Forming Process using Anisotropic Yield Criteria [Volume 11, Issue 4, 2021, Pages 93-105]
  • Afshinfar, S. Adaptive Fuzzy Sliding Mode Position and Attitude Control for a Quadrotor UAV [Volume 7, Issue 4, 2018, Pages 159-172]
  • Aftabi Sani, A. Enhanced two-dimensional differential transform method for solving homogenous Dirichlet problems; Application: heat transfer in bars [Volume 9, Issue 4, 2019, Pages 209-226]
  • Aftabi Sani, A. Solving Two Classical Fluid-Structure Interaction Problem Utilizing Differential Transform Method [Volume 10, Issue 3, 2020, Pages 17-30]
  • Agaebrahimi, M. R. Energy and Exergy Analysis and Optimization of a Cogeneration System Based on Solid Oxide Fuel Cell for Residential Applications [Volume 5, Issue 4, 2016, Pages 213-228]
  • Agakhani Mahyari, Farhad An investigation into the effect of surface preparation method and heat Treatment on mechanical properties of multilayer Al / Al / Steel sheet produced by cold roll bonding [Volume 13, Issue 2, 2023, Pages 55-67]
  • Aghabalaeivahid, Ali Characterization of Flow and Hardening Parameters of 1100 Aluminium Alloy by Combining Nanoindentation Test and Crystal Plasticity Finite Element Simulation [Volume 13, Issue 3, 2023, Pages 97-113]
  • Aghaee Attar, M. Investigation of single point incremental forming parameters effect on the blanks produced by friction stir welding [Volume 8, Issue 4, 2019, Pages 85-96]
  • Aghaei Tog, R. Flow field modeling and performance improving of an axial turbine's using Adjoint method [Volume 8, Issue 1, 2018, Pages 127-133]
  • Aghaei-Togh, R. Exergy Analysis and Numerical Investigation of the Effects of Nozzle Profile on the Partially-Admitted Supersonic Turbine's Performance [Volume 11, Issue 1, 2021, Pages 169-184]
  • Aghanajafi, C. The Effect of Non-uniform magnetic field on the fluid flow over a moving and permeable plate with using self-similar method [Volume 6, Issue 2, 2016, Pages 341-349]
  • Aghanjafi, cyrus Numerical solution of a uniform magnetic field effect on the free convection heat transfer from a vertical plate [Volume 3, Issue 2, 2013, Pages 65-75]
  • Aghareb Parast, M. S. Comparing bending fatigue and fretting fatigue properties in aluminum-silicon alloy under working conditions of engine piston-ring system [Volume 11, Issue 2, 2021, Pages 157-174]
  • Aghighi, M.S. Investigation of natural convection heat transfer of viscoplastic nanofluids-Casson model in a square enclosure [Volume 11, Issue 4, 2021, Pages 165-178]
  • Ahmadi, A. Waterhammer caused by intermittent and simultaneously pump failure in pipe systems including series pump groups [Volume 4, Issue 4, 2015, Pages 207-221]
  • Ahmadi, Ahmad Axial Vibration of a Rod with Viscoelastic Support [Volume 3, Issue 1, 2013, Pages 67-79]
  • Ahmadi, Ahmad Investigation of Non Newtonian fluid effects in unsteady flow of pipe system [Volume 5, Issue 1, 2015, Pages 211-219]
  • Ahmadi, Ali Numerical Investigation of Bending Angle and Entropy Generation in Laser Forming of High Strength Steel [Volume 9, Issue 4, 2019, Pages 151-166]
  • Ahmadi, Bahman Developing a Multi-Objective Game Theoretic Design of Path-Generating Planar Mechanism [Volume 13, Issue 6, 2024, Pages 17-29]
  • Ahmadi, H. Adaptive Backstepping Control for 4 DOF SCARA Robot in the Presence of Uncertainties [Volume 5, Issue 4, 2016, Pages 297-307]
  • Ahmadi, H. Design, Fabrication and Control of a New Type of The Omnidirectional Spherical Wrist [Volume 8, Issue 2, 2018, Pages 1-11]
  • Ahmadi, H. Fractional-order super-twisting nonsingular terminal sliding mode control of 2-DOF robotics manipulators [Volume 11, Issue 2, 2021, Pages 41-56]
  • Ahmadi, H. Investigating on the energy absorption of PA/GF6 thermoplastic composite produced by hot pressing method under low-velocity impact test [Volume 13, Issue 1, 2023, Pages 1-13]
  • Ahmadi, Habib Kinematic and inverse kinematic analysis of hybrid Delta parallel robot with spherical wrist using Adptive Neuro Fuzzy Inference System [Volume 12, Issue 5, 2022, Pages 13-30]
  • Ahmadi, Hamed Experimental and numerical analysis of the effect of using two perforated plates in front of the target against ballistic impact [Volume 12, Issue 5, 2022, Pages 175-187]
  • Ahmadi, I. Life prediction of reinforced Glass-Epoxy and Graphite-Epoxy polymers subjected to various loading conditions [Volume 6, Issue 1, 2016, Pages 153-165]
  • Ahmadi, Isa Free Vibration Analysis of Piezoelectric Nanobeam Based on a 2ِِD- Formulation and Non-local Elasticity Theory [Volume 12, Issue 5, 2022, Pages 59-72]
  • Ahmadi, M. Evaluation of Ultrasonic Method Capability in Measurement of Longitudinal Welding Residual Stress through Thickness [Volume 8, Issue 3, 2018, Pages 29-47]
  • Ahmadi, S. Optimization of the CHP System, Investigation of its Pollution and Economic Costs in Ideal and Real Conditions in terms of Local and Global Approach [Volume 10, Issue 1, 2020, Pages 161-176]
  • Ahmadi Balootaki, M. sensitivity analysis of Operational Modal Approaches in damping identification and implementation on an industrial sample [Volume 8, Issue 3, 2018, Pages 177-192]
  • Ahmadi Brogani, Y. Thermodynamics modeling of heat and vapor transfer in the shell- and- tube membrane humidifier: a gas- to- gas type [Volume 5, Issue 3, 2015, Pages 223-236]
  • Ahmadi Broghani, S. Y. Simulation of Anodic Dissolution in Electrochemical Machining and Tool Design using the Sensitivity Method [Volume 6, Issue 1, 2016, Pages 239-248]
  • Ahmadi Brooghani, Seyed Y. Multiobjective Optimization Method for Drawbead and Blank-Holder Force Design in Sheet Metal Forming Process [Volume 6, Issue 2, 2016, Pages 167-179]
  • Ahmadi Brooghani, Seyed Y. Investigation of stress distribution in healthy and arthritic knee joints after registering 3D files on the radiographic images [Volume 13, Issue 1, 2023, Pages 147-156]
  • Ahmadi Brooghani, S. Y. Design of tube Hydroforming system with the Die Ultrasonic Vibration. [Volume 5, Issue 1, 2015, Pages 135-148]
  • Ahmadi Brooghani, S. Y. Effect of Through-thickness Variation of Mechanical Properties on Stress Distribution in API X65 Linepipe Steel: An Experimental and Numerical Investigation [Volume 12, Issue 4, 2022, Pages 81-90]
  • Ahmadi Brooghani, S.Y Experimental study of crack during ceramic drying and compare with the finite element [Volume 4, Issue 1, 2014, Pages 119-129]
  • Ahmadi Brooghani, S.Y. Calculation Diffusion Coefficient of Drying Clay Ceramics Using Firefly Algorithm With Study the Effects of Part Geometry [Volume 5, Issue 4, 2016, Pages 55-67]
  • Ahmadi Brooghani, S.Y. Low-velocity impact response of A356/SiCp composite foam [Volume 7, Issue 2, 2017, Pages 129-147]
  • Ahmadikia, H. Investigation of the effect of nanoparticles on cryosurgery using non-Fourier heat transfer model [Volume 7, Issue 1, 2017, Pages 205-216]
  • Ahmadi-Nejad joushani, H. Investigating the effects of microtubules in the neuronal cell response to the blast load using fluid-structure interactions method [Volume 9, Issue 3, 2019, Pages 13-24]
  • Ahmadi Sheikhsarmast, N. Influence of gas channels and Gas Diffusion Layers configuration on the performance of Polymer Electrolyte Membrane Fuel Cell [Volume 9, Issue 3, 2019, Pages 249-263]
  • Ahmadi Sheikhsarmast, N. Experimemtal and Numerical Analysis of Bipolar width and Gas Channels Geometrical Configuration Effect on Proton Exchange Membrane Fuel cell [Volume 10, Issue 4, 2021, Pages 357-372]
  • Ahmadi Sheikhsarmast, Nima Investigating the effect of the geometry of gas injection channels on the performance and dynamic behavior of the polymer electrolyte membrane fuel cell [Volume 13, Issue 2, 2023, Pages 121-128]
  • Ahmadi Sheykh Shabani, G. Thermodynamic Analysis of Feed Water Heating Repowering of Mohammad Montazeri Steam Power Plant [Volume 6, Issue 2, 2016, Pages 311-328]
  • Ahmadi Vmakani, S. The Effect of Bending Deflection on the Strength Degradation of Homogenous and Hybrid Composites Reinforced with Brittle and Ductile Fibers [Volume 6, Issue 1, 2016, Pages 11-18]
  • Ahmadkhah, A. Numerical Investigation of Longitudinal and Vertical Positions of Canard on Pressure Distribution and Aerodynamic Coefficients of a Maneuverable Aircraft Wing Model [Volume 6, Issue 4, 2016, Pages 301-316]
  • AhmadKkhatir, Farzad Experimental investigation of the formability of heat treated AA6063 tubes using hydraulic rotary draw bending process [Volume 13, Issue 4, 2023, Pages 95-106]
  • Ahmadzadeh, O.R. Mass Detection by Theoretical and Experimental Frequency Response Analysis of Bending Piezoelectric Actuators [Volume 9, Issue 4, 2019, Pages 27-39]
  • Ahsani Tehrani, H. Control a class of fractional-order systems with delay in a specified sector [Volume 9, Issue 3, 2019, Pages 51-63]
  • Ahsani Tehrani, Hojjat A new method for the stability of discrete-time two-dimensional systems defined by the Roesser model [Volume 4, Issue 2, 2014, Pages 67-74]
  • Ahsani Tehrani, Hojjat Tissue Temperature Control in a Bio-Heat Transfer Equation with the Conjugate Gradient Method [Volume 13, Issue 3, 2023, Pages 159-170]
  • Ajam, H. Experimental and Numerical Investigation on the Parameters of Ventilated Super Cavitation around 30 degree Conical Cavitator [Volume 5, Issue 3, 2015, Pages 303-314]
  • Ajam, H. Optimal design of a three-outlet channel with specified outlet flow rates using the topology optimization method [Volume 11, Issue 1, 2021, Pages 153-168]
  • Ajilian Momtaz, Ali Finding the Optimal Distance and Cross Section for the Control Body to Decrease the Effects of Vibrations Caused by Vortexes in the Lock-in Area [Volume 3, Issue 1, 2013, Pages 81-94]
  • Ajorloo, D. Mathematical model of a vacuum box electric furnace for online computation: A nonlinear ordinary differential equation model and experimental verification [Volume 12, Issue 1, 2022, Pages 145-157]
  • Akbari, A. Computational homogenization to study the effect of microscopic cracks on the macroscopic strength of polycrystalline materials [Volume 11, Issue 1, 2021, Pages 59-71]
  • Akbari, A. A. Vehicle dynamics improvement using developed robust controller [Volume 6, Issue 4, 2016, Pages 77-90]
  • Akbari, A. A. Dynamic responses assessment in fault diagnosis of multi-function active engine mounts with cooling capacities [Volume 9, Issue 3, 2019, Pages 1-12]
  • Akbari, D. Application of laser shearing interferometry in non-destructive inspection and size estimation of plane defects [Volume 9, Issue 4, 2019, Pages 1-14]
  • Akbari, D. Application of vibration loading method for non-destructive testing of polymer Material by Means of Laser Shear Interferometry [Volume 10, Issue 4, 2021, Pages 15-26]
  • Akbari, H. Damage Diagnosis of the Beam-Like Structures Using Recued Model Updating and Iterative Method [Volume 5, Issue 2, 2015, Pages 83-97]
  • Akbari, M. A. Analysis of a High-Speed Underwater Supercavitating Projectile Dynamics, Based on an Experiment [Volume 9, Issue 1, 2019, Pages 279-291]
  • Akbari, M. J. The effect of horizon size and projectile shape on the crack growth in the cracked beam using peridynamic method [Volume 8, Issue 4, 2019, Pages 39-51]
  • Akbari, O. A. Thermodynamic Analysis of Feed Water Heating Repowering of Mohammad Montazeri Steam Power Plant [Volume 6, Issue 2, 2016, Pages 311-328]
  • Akbari, R. Analysis the Simultaneous Effects of Injection Pressure and EGR on the Engine Performance and the Amount of Pollutant Emissions in a High Speed Direct Injection (HSDI) Diesel Engine [Volume 7, Issue 3, 2017, Pages 213-226]
  • Akbari, Z. Performance evaluation of Ferric oxide (Fe3O4) and Graphene nanoplatelet (GNP) nanoparticles in solar steam generation [Volume 9, Issue 2, 2019, Pages 181-196]
  • Akbari Sula, A. Experimental Study of a Single Bubble Growth and Detachment from a Submerged Orifice in the Liquid Column Using Passive Acoustic Emission [Volume 12, Issue 1, 2022, Pages 133-142]
  • Akbarzadeh, P. Three-dimensional thermo-hydrodynamic simulation of industrial lubricants effect on hydrodynamic characteristics of finite tilting-pad journal bearings [Volume 5, Issue 4, 2016, Pages 257-269]
  • Akbarzadeh, P. Fatigue Life Prediction of Adhesive Joints Based on Initial Stiffness and Stiffness Degradation [Volume 6, Issue 3, 2016, Pages 175-183]
  • Akbarzadeh, P. Numerical Simulation of steady and unsteady natural convection heat transfer of nanofluids in eccentric and concentric porous annuluses [Volume 9, Issue 4, 2019, Pages 117-136]
  • Akbarzadeh, S. Finite Element Simulation and Analysis of Deposition Process and Thermal Loading on Thermal Barrier Coatings [Volume 10, Issue 4, 2021, Pages 41-51]
  • Akbarzadeh, S. Thermal elastohydrodynamic analysis of mechanical sealsi using finite difference method [Volume 12, Issue 1, 2022, Pages 101-114]
  • Akbarzadeh Tootoonchi, A.R. Design & development of modular compact series elastic actuator for lower limb extremity assistant exoskeleton [Volume 9, Issue 3, 2019, Pages 109-123]
  • Alahdadian, A.A. Prediction of Forming Limit Diagram for Ti-64 titanium alloy sheet using finite element simulation [Volume 4, Issue 4, 2015, Pages 23-32]
  • Alamatian, Javad New Approach for Active Control of Smart Structure Using Multi Actuators and Sensors [Volume 3, Issue 4, 2014, Pages 1-9]
  • Alasty, A. Force and stress analysis of double press machine in use with single-action die press [Volume 6, Issue 1, 2016, Pages 167-177]
  • Alavi, N. natural convection heat transfer of a nanofluid in a baffle L-Shaped cavity [Volume 6, Issue 3, 2016, Pages 311-321]
  • Alavi Gharebagh, A. An Experimental Study and Statistical Modelling on Compressive Properties of Epoxy/ Graphene/ Hydroxyapatite Nanocomposites [Volume 8, Issue 1, 2018, Pages 59-70]
  • Alavi Nia, Ali Experimental and numerical investigations of effects of section geometry and metallic foam filler on deformation and energy absorption characteristics of thin-walled tubes [Volume 4, Issue 1, 2014, Pages 51-63]
  • Albooyeh, A.R. Numerical analysis of mechanical properties of mesoporous silica and hydroxyapatite-polypropylene nanocomposites [Volume 6, Issue 3, 2016, Pages 229-303]
  • Albooyeh, A.R. The investigation of microstructure and mechanical properties of metallic glass/ceramic reinforced hybrid Al matrix composite used as foam precursor material [Volume 10, Issue 2, 2020, Pages 153-162]
  • Alderliesten, R. Experimental investigation of repeated low velocity impact on GLARE with various energy levels [Volume 5, Issue 2, 2015, Pages 43-56]
  • Alexandrov, S. Study of the Effect of Calibration Procedure on the Accuracy of the Phenomenological Ductile Fracture Criteria in Sheet Metal Forming [Volume 10, Issue 1, 2020, Pages 1-16]
  • Alfi, Alireza Optimal Intelligent Control for Glucose Regulation [Volume 2, Issue 3, 2012, Pages 71-79]
  • Alfi, A.R. Aircraft Actuator Fault Diagnosis and Isolation using Robust Incremental Nonlinear Dynamic Inversion [Volume 10, Issue 3, 2020, Pages 103-120]
  • Aliabadi, A. Identifying Process Damping of Turning Process Using Time Series Analysis [Volume 5, Issue 4, 2016, Pages 35-45]
  • Aliabadi, A. Dimensional characteristic of glass/epoxy composite plate with edge notch under wet freeze-thaw cycles [Volume 10, Issue 3, 2020, Pages 219-231]
  • Aliabadi, M. Analysis of using nano aerogel glazing on solar heat gain and cooling load in an office at hot and dry, hot and humid and cold climates of Iran [Volume 7, Issue 4, 2018, Pages 209-221]
  • Alibeigloo, A. Investigation of dynamics and stability behavior of axially moving micro-beams with functionally graded property in the longitudinal direction [Volume 10, Issue 2, 2020, Pages 79-94]
  • Alimirzaloo, Vali Characterization of Flow and Hardening Parameters of 1100 Aluminium Alloy by Combining Nanoindentation Test and Crystal Plasticity Finite Element Simulation [Volume 13, Issue 3, 2023, Pages 97-113]
  • Alimohammadi, A. Experimental and Numerical Study on forming limit diagram of two-layer metallic sheets at high temperature [Volume 10, Issue 1, 2020, Pages 107-120]
  • Alimouri, P. Finite element model updating using operational modal analysis and bees optimization algorithm [Volume 7, Issue 4, 2018, Pages 117-133]
  • Alinia-ziazi, Ali Investigation on the effect of laser cladding parameters of Inconel 713 LC by Metco 81VF powder on the microstructure characteristics and micro hardness of coating [Volume 12, Issue 5, 2022, Pages 93-108]
  • Ali Pashaee, D. Analytical Study on Longitudinal Vibration of Viscoelastic Cracked Rod under Magnetic Field. [Volume 10, Issue 4, 2021, Pages 275-286]
  • Alitavoli, Majid Experimental investigation into the energy absorption of sandwich structures with the core made of waste rubber particles under impact loading [Volume 12, Issue 6, 2023, Pages 13-23]
  • AliTavoli, M. Noise Removal from the Vibration Signals of the Rotating Machinery Using the Empirical Wavelet Transform and the Conventional Thresholding Methods [Volume 9, Issue 1, 2019, Pages 111-124]
  • Alizade, A. Investigation of Microstructure and Mechanical Behavior of Al/SiC/CNT Surface Composite Fabricated by Friction Stir Processing [Volume 11, Issue 6, 2022, Pages 219-233]
  • Alizadeh, A. The effective parameters on shear properties of sandwich panels with glass fibers-vinyl ester composite skin and polyvinyl chloride core [Volume 10, Issue 1, 2020, Pages 53-64]
  • Alizadeh, A. Effect of functionalized Graphene Nanoplates on the Mechanical Properties of Vinil Ester/ Glass Fibers Compositete [Volume 10, Issue 4, 2021, Pages 1-14]
  • Alizadeh, Masoud Fusion of inertial measurement system and visual navigation for unmanned aerial vehicles using Hardware in the Loop simulation [Volume 12, Issue 5, 2022, Pages 31-46]
  • Alizadeh Momen, S. Experimental Investigation of Indoor Cooking Using an Indirect Solar Cooker Integrated with Heat Storage Materials [Volume 11, Issue 3, 2021, Pages 207-219]
  • Alizadeh Vaghslou, Y. Experimental analysis of buckling strength of notched aluminum plates reinforced using fiber metal laminate (FML) patches [Volume 6, Issue 1, 2016, Pages 117-127]
  • Allaee, Mohammad Hossein Numerical and Experimental Analysis of the Effect of Material, Diameter and Number of wires as the Reinforcements of the Foam Core in the Bending Strength of Sandwich Panels [Volume 13, Issue 4, 2023, Pages 67-81]
  • Almultashi, Mohammed Experimental study of solar collector with helical coil [Volume 12, Issue 5, 2022, Pages 283-292]
  • AL Rkabi, M. Performance Comparison of the Electro/Magneto-Rheological Elastomers for Vibration Reduction of Rotating Rotors [Volume 9, Issue 3, 2019, Pages 139-153]
  • Amanifard, N. Numerical investigation of collecting wire electrode effect on the flow field and heat transfer with electrohydrodynamic actuator [Volume 6, Issue 1, 2016, Pages 201-213]
  • Amanifard, N. Numerical Investigation of the Effect of Corona Discharge on the Heat Transfer and Pressure Drop over a Single Slot [Volume 6, Issue 4, 2016, Pages 205-221]
  • Amanifard, Nima Numerical Investigation of the Electric Field Effects on the Flow and Forced Convection Heat Transfer over a Backward-acing Step [Volume 5, Issue 2, 2015, Pages 233-248]
  • Ameri, M. Exergy, Exergoeconomic & Environmental Impact Analysis and Multi-Objective Optimization of Damavand Combined Cycle Power Plant [Volume 5, Issue 2, 2015, Pages 303-328]
  • Amerian, M. experimentally study of thermal resistance coefficient in closed loop pulsating heat pipe and the effect of filling ratio and evaporator to condenser length ratio on it [Volume 12, Issue 4, 2022, Pages 175-187]
  • Amin Borhani, Mohammad Numerical Study of Thermo Hydraulic Effect of Wire Wrap Spacer with Different Pitch in Hexagonal Fuel Assembly [Volume 12, Issue 6, 2023, Pages 205-217]
  • Amin Esmaeili, H. Numerical Simulation of free falling Cylinders using Overset Grid Method [Volume 6, Issue 3, 2016, Pages 1-16]
  • Amini, R. Channels Flow Modeling by Using Isogeometric Analysis [Volume 5, Issue 4, 2016, Pages 15-26]
  • Amini, Ramin Using isogeometric method for dam break modeling by Lagrangian approach. [Volume 4, Issue 3, 2014, Pages 45-55]
  • Amini, Yasser Heat transfer enhancement in a microchannel using active vibrating piezoelectric vortex generator [Volume 12, Issue 6, 2023, Pages 191-204]
  • Aminian, E. Investigating the effect of Marangoni phenomenon on single drop density on Wenzel and Cassie structures [Volume 10, Issue 4, 2021, Pages 387-398]
  • Aminian, Ehsan Analysis of the effect of surface slope changes on the growth, motion, and coalescence of droplets in dropwise condensation [Volume 12, Issue 6, 2023, Pages 163-180]
  • Amini Foroushani, J. Extraction of hydrodynamic coefficients applying planning mechanism motion maneuver using computational fluid dynamics [Volume 8, Issue 1, 2018, Pages 215-228]
  • Aminy, M. Design, fabrication and modeling of a new solar still desalination system and evaluation of its performance [Volume 8, Issue 2, 2018, Pages 205-220]
  • Aminzadeh, A. Dynamic Modeling and Controller Design for a Space Vehicle with Fuel Sloshing [Volume 11, Issue 2, 2021, Pages 25-40]
  • Aminzadeh, A. Distributed Coverage Control of a Multi Agent System in a Disaster Area and Localizing the Stationary Probable Targets in the Environment [Volume 12, Issue 1, 2022, Pages 1-20]
  • Aminzadeh, M. Analysis the influence of air outlet opening’s location in an industrial environment with high temperature radiant heaters on uniformity of thermal conditions and distribution of the contaminant in presence of asymmetric flow field [Volume 6, Issue 3, 2016, Pages 249-260]
  • Amir, S. Aerodynamic and Free Vibration Analyses of Metal Foams Reinforced Graphene Nanoplatelets Sector Plates [Volume 12, Issue 2, 2022, Pages 29-48]
  • Amirabadi, H. Simulation of Anodic Dissolution in Electrochemical Machining and Tool Design using the Sensitivity Method [Volume 6, Issue 1, 2016, Pages 239-248]
  • Amirabadi, H. Using of Machine Vision System for Offline Setup Cast parts on CNC Milling Machine with Industrial Application Approach [Volume 11, Issue 1, 2021, Pages 239-255]
  • Amiri, E. Experimental Analysis of Effective Parameters on Human Balance During Standing and Gaiting [Volume 8, Issue 1, 2018, Pages 51-57]
  • Amiri, Farzad Numerical and Experimental Analysis of the Effect of Material, Diameter and Number of wires as the Reinforcements of the Foam Core in the Bending Strength of Sandwich Panels [Volume 13, Issue 4, 2023, Pages 67-81]
  • Amiri, H. Design, fabrication and modeling of a new solar still desalination system and evaluation of its performance [Volume 8, Issue 2, 2018, Pages 205-220]
  • Amiri, Hossein Experimental and Numerical analysis of PEM fuel cell performance with a new helically symmetrical flow channel [Volume 6, Issue 4, 2016, Pages 285-300]
  • Amirian, U. The effective parameters on shear properties of sandwich panels with glass fibers-vinyl ester composite skin and polyvinyl chloride core [Volume 10, Issue 1, 2020, Pages 53-64]
  • Amirian, U. Effect of functionalized Graphene Nanoplates on the Mechanical Properties of Vinil Ester/ Glass Fibers Compositete [Volume 10, Issue 4, 2021, Pages 1-14]
  • Amiri-Jaghargh, A. The study of the effects of triangular roughness on the thermal creep flow in Knudsen pumps with DSMC method [Volume 10, Issue 4, 2021, Pages 97-109]
  • Amiri Rad, Ehsan Evaluation of different nucleation models and droplet radius averaging methods and their combination on condensing steam flow [Volume 5, Issue 1, 2015, Pages 193-209]
  • Amjadi, A. Dynamic Analysis and Control of Two Phase Flow Instability in Boilnig Channel [Volume 11, Issue 5, 2021, Pages 165-181]
  • Amjadian, B. Simulation of baffle effects on sloshing in model aircraft fuel tank [Volume 9, Issue 2, 2019, Pages 275-287]
  • Amoozgar, M.R. Limit cycle oscillations in swept wings based on fully intrinsic equations and considering the static stall effects [Volume 11, Issue 6, 2022, Pages 207-217]
  • Amoushahi, H. Buckling of Viscoelastic Thick Plates by Finite Strip Method and Higher Order Shear Deformation Theory [Volume 6, Issue 4, 2016, Pages 103-124]
  • Amoushahi, H. Dynamic analysis of composite plates with delaminations under hygrothermal loads using finite strip method [Volume 7, Issue 1, 2017, Pages 187-203]
  • Andakhshideh, A. Investigation of nonlinear pull-in phenomena in functionally graded micro-beams under electrostatic excitation [Volume 8, Issue 3, 2018, Pages 137-151]
  • Andakhshideh, A. Study of Primary and Secondary Nonlinear Resonances of Nanobeam Based on Nonlocal Strain Gradient Theory [Volume 10, Issue 2, 2020, Pages 163-175]
  • Anjomrouz, Amin A review on the structures and characteristics of micro-turbojet engines [Volume 13, Issue 5, 2023, Pages 59-76]
  • Ansari, M. R. Experimental Study of a Single Bubble Growth and Detachment from a Submerged Orifice in the Liquid Column Using Passive Acoustic Emission [Volume 12, Issue 1, 2022, Pages 133-142]
  • Ansari, R. Experimental study of the influence of mixing method of nanoclay on mechanical properties of polymer composites and fiber metal laminates [Volume 7, Issue 2, 2017, Pages 63-80]
  • Ansaryan, Y. Investigation of free and forced vibration of a composite circular cylindrical shell with internal fluid [Volume 7, Issue 2, 2017, Pages 93-109]
  • Arab, Ali Asghar Design and Implement of Fuzzy control of a Robotic Camera for Target Tracking [Volume 4, Issue 1, 2014, Pages 1-10]
  • Arab Golarche, A. R. Investigation of flow field and torque coefficient of Darrieus wind turbine with respect to pitch angle variations and tip speed ratios [Volume 6, Issue 4, 2016, Pages 173-191]
  • Arabi, A. Application of Finite-Difference Based Lattice Boltzmann Method for Numerical Simulation of Nanofluid Turbulent Convection in channel [Volume 11, Issue 1, 2021, Pages 325-350]
  • Arabi, H. Presenting a new method for evaluating friction effects at extrusion die entrance based on combination of the open die backward extrusion and ring compression tests [Volume 11, Issue 1, 2021, Pages 73-88]
  • Arab Solghar, A. Experimental and Numerical analysis of PEM fuel cell performance with a new helically symmetrical flow channel [Volume 6, Issue 4, 2016, Pages 285-300]
  • Arab Solghar, A.R. Investigation of the effect of cavity insertion in brick on heat transfer through using computational fluid dynamic simulation [Volume 10, Issue 2, 2020, Pages 267-283]
  • Arabyarmohammadi, E. Optimization of shell and tube heat exchangers using heuristic algorithms [Volume 8, Issue 3, 2018, Pages 153-163]
  • Arbabi, V. Investigation of stress distribution in healthy and arthritic knee joints after registering 3D files on the radiographic images [Volume 13, Issue 1, 2023, Pages 147-156]
  • Ardakanian, R. Design & development of modular compact series elastic actuator for lower limb extremity assistant exoskeleton [Volume 9, Issue 3, 2019, Pages 109-123]
  • Ardiani, M Solution of Nonlinear Incompressible Hyperelastic Problems by Isogeometric Analysis Method [Volume 5, Issue 2, 2015, Pages 29-41]
  • Arefi, M. Analysis of functionally graded beams with variable thickness using first-order shear deformation theory subjected to mechanical and thermal loads [Volume 10, Issue 1, 2020, Pages 65-76]
  • Arghavan, َA Intelligent Energy Managment Strategy for Parallel Hybrid Hydraulic Vehicle [Volume 2, Issue 4, 2013, Pages 93-103]
  • Ariaei, A.R Vibration Analysis of Multiple Parallel Timoshenko Beams with Intermediate Flexible Connections subjected to a Moving Mass [Volume 6, Issue 2, 2016, Pages 69-86]
  • Arian, M. Smart Fault Diagnosis of Rotating Machine Using Fuzzy Systems and Analysis the Effect of Different Membership Functions [Volume 6, Issue 1, 2016, Pages 85-98]
  • Arianfar, Y. Analysis of natural convection of hydromagnetic fluid contains micro-particles in a infinite vertical channel [Volume 10, Issue 3, 2020, Pages 281-294]
  • Aris, H. Design, Fabrication and Control of a New Type of The Omnidirectional Spherical Wrist [Volume 8, Issue 2, 2018, Pages 1-11]
  • Arjmand, O. Experimental Analysis of the Strain Effect on the Anisotropic Coefficients of 6061 Aluminum Sheet Using Digital Image Processing [Volume 6, Issue 1, 2016, Pages 73-84]
  • Armaghani, T. natural convection heat transfer of a nanofluid in a baffle L-Shaped cavity [Volume 6, Issue 3, 2016, Pages 311-321]
  • Aroo, H. Modeling of creep behavior in AlSiCuNiMg alloy at different temperatures and stress levels [Volume 9, Issue 2, 2019, Pages 61-76]
  • Arshid, E. Aerodynamic and Free Vibration Analyses of Metal Foams Reinforced Graphene Nanoplatelets Sector Plates [Volume 12, Issue 2, 2022, Pages 29-48]
  • Asadizadeh, N. F. Superharmonic resonance analysis of a grid stiffened truncated conical shell subjected to external transverse force [Volume 10, Issue 4, 2021, Pages 111-123]
  • Asemi, O. Evaluation of the stress intensity factor for circumferential cracked cylinders under non-classical thermal shock [Volume 5, Issue 3, 2015, Pages 101-112]
  • Asgari, M. Finite element modeling of debonding behavior of the adhesively bonded joints between sandwich panel and pultruded profile in flexural loading [Volume 6, Issue 1, 2016, Pages 107-116]
  • Ashany, J. Z. Experimental investigation of fabricated parts by laser melting of iron powder to achive turning point between sintering process and complete melting [Volume 7, Issue 4, 2018, Pages 61-72]
  • Ashenai Ghasemi, F. Dynamic Response of Curved Sandwich Beam with a Soft Flexible Core Subjected to Radial Low Velocity Impact [Volume 5, Issue 1, 2015, Pages 13-29]
  • Ashenai Ghasemi, F. Experimental analysis of buckling strength of notched aluminum plates reinforced using fiber metal laminate (FML) patches [Volume 6, Issue 1, 2016, Pages 117-127]
  • Ashenai Ghasemi, F. The effects of arbitrary boundary conditions on a laminated composite plate response subjected to large mass & low velocity impact [Volume 8, Issue 1, 2018, Pages 35-49]
  • Ashory, Mohammad Reza Investigating the effects of cross section asymmetry on the vibration behavior of the nonlinear nanoresonator under internal resonance conditions [Volume 13, Issue 4, 2023, Pages 53-66]
  • Ashrafi, Hojjat Investigating the effect of the geometry of gas injection channels on the performance and dynamic behavior of the polymer electrolyte membrane fuel cell [Volume 13, Issue 2, 2023, Pages 121-128]
  • Ashrafi, Mohammad Javad Experimental and numerical study on the effects of friction and specimen dimension in split Hopkinson pressure bar [Volume 12, Issue 5, 2022, Pages 1-11]
  • Ashrafi, N. Dynamic Behavior of Articulated Pipes Conveying Fluid With Harmonic Velocity Using the Method of Multiple time scales [Volume 11, Issue 3, 2021, Pages 53-70]
  • Ashrafi zadeh, Ali Numerical study of the flow around cylinders with different cross sections via immersed boundary method [Volume 3, Issue 4, 2014, Pages 111-123]
  • Ashrafizadeh, Ali Development and Evaluation of two Hybrid Shape Design Algorithms in Fluid Mechanics [Volume 4, Issue 4, 2015, Pages 1-12]
  • Ashraf Talesh, H. Experimental Study and Mathematical Modeling of Deformation of Rectangular Plates under the Impact Load [Volume 6, Issue 1, 2016, Pages 143-152]
  • Askari, Amir Reza Investigating the influence of bearings elastic properties on nonlinear dynamics of unbalanced induction motors shaft in presence of asymmetric magnetic pull [Volume 13, Issue 5, 2023, Pages 137-153]
  • Askari, A. R. Non-linear analysis of FG beam-based double-movable-electrode MEMS [Volume 10, Issue 2, 2020, Pages 111-126]
  • Askari, Rasoul Investigating, Simulating and Applying Geometric Scaling Effects in the Prediction and Calculation of Aerodynamic Coefficients from Wind Tunnel to Real Scale [Volume 13, Issue 5, 2023, Pages 1-17]
  • Askarishahi, M. Exploring the Effect of Foot Position on Performance of a Modular and Hierarchical Movement Planner in Planning the Sit-to-Stand Transfer [Volume 6, Issue 3, 2016, Pages 109-118]
  • Asrari, H. Adaptive fuzzy sliding mode control of a robotic manipulator in task-space using voltage control strategy [Volume 5, Issue 3, 2015, Pages 17-26]
  • Ataei, M. Reliability Analysis and Evaluating of Rotary Drilling Machine – Case Study: Mine No.1 of Golgohar Iron Ore Mine [Volume 6, Issue 3, 2016, Pages 185-194]
  • Atai, Ali Asghar Multi objective optimization of static behavior of FGM multi layered plate based on exact solution and using neural-genetic method [Volume 3, Issue 1, 2013, Pages 55-66]
  • Atashafrooz, M. Combination of Meshless Local Petrov-Galerkin and Finite Difference Methods for Analysis of Transient and Incompressible Navier–Stokes Equations [Volume 10, Issue 4, 2021, Pages 209-223]
  • Atashkari, K. Thermodynamic analysis and Pareto optimization of hybrid system consisting of biomass gasification, solid oxide fuel cell and gas turbine [Volume 7, Issue 1, 2017, Pages 113-133]
  • Attar, A. Investigation of the effect of geometrical parameters on the out-of-plane displacement of a T-shaped piezoelectric microcantilever [Volume 8, Issue 4, 2019, Pages 1-9]
  • Atyabi, Ali Effect of GDL porosity and pressure on the PEM fuel cell performance with honeycomb flow-field [Volume 3, Issue 3, 2013, Pages 109-119]
  • Ayani, M. Experimental and numerical investigation of blade shape effect on the Hunter wind turbines efficiency [Volume 6, Issue 2, 2016, Pages 329-339]
  • Ayati, M. Stress and Strain Analysis of Femur in Taylor Spatial Frame [Volume 8, Issue 1, 2018, Pages 13-21]
  • Ayatollahi, M. R. Predicting macromechanical behavior of dual phase steels based on actual micromechanical modeling [Volume 5, Issue 1, 2015, Pages 31-38]
  • Ayatollahi, M.R. Fracture prediction of key-hole notched graphite plates by using the strain energy density based on the equivalent factor concept [Volume 7, Issue 2, 2017, Pages 1-15]
  • Ayoobi, A.R. Study of transient pool boiling of deionized water in two modes of presence and absence of a magnetic field [Volume 10, Issue 1, 2020, Pages 209-221]
  • Azadi, M. Modeling of creep behavior in AlSiCuNiMg alloy at different temperatures and stress levels [Volume 9, Issue 2, 2019, Pages 61-76]
  • Azadi, M. Comparing bending fatigue and fretting fatigue properties in aluminum-silicon alloy under working conditions of engine piston-ring system [Volume 11, Issue 2, 2021, Pages 157-174]
  • Azadi, Sh. Vehicle yaw stability improvement via active braking system using adaptive sliding mode control [Volume 7, Issue 1, 2017, Pages 65-78]
  • Azadi, Sh. A new estimation approach of road friction coefficient and optimum wheel slip ratio for longitudinal and lateral vehicle dynamics control using active steering and braking [Volume 9, Issue 3, 2019, Pages 231-247]
  • Azadian, R. Design of ANFIS Control System Using Genetic Algorithm Optimization Method to Vibration Vibration on a Beam [Volume 7, Issue 4, 2018, Pages 1-11]
  • Azadian, R. Design of ANFIS Control System Using Memetic Method to Vibration control on a Beam with piezoelectric materials [Volume 7, Issue 4, 2018, Pages 105-116]
  • Azami, M. Electro–Magneto–Thermo-Mechanical Analysis of polymeric Smart Rotating Disk Reinforced WithMultiwalled Carbon Nanotubes with Nonlinear Behavior [Volume 6, Issue 2, 2016, Pages 97-108]
  • Azami, M. Structural damage localization in beam-like structures using Multi-channel Empirical Mode Decomposition of random response [Volume 8, Issue 3, 2018, Pages 221-231]
  • Azarakhsh, S. Experimental and Numerical Investigation of Crushing of Brass Cylindrical Tubes [Volume 6, Issue 2, 2016, Pages 181-196]
  • Azarakhsh, S. Investigation of Axial and Oblique Crushing of Empty and Foam-Filled Conical Tubes under Clamped Boundary Condition [Volume 6, Issue 4, 2016, Pages 139-159]
  • Azarfar, Azita self-tuning state feedback control of MIMO singular systems with applications to constrained robot systems [Volume 2, Issue 4, 2013, Pages 37-46]
  • Azimi, A. An Efficient Approach to Calculate the Amount of Released Gas in Branched Networks Considering Minor Loss Effects [Volume 5, Issue 2, 2015, Pages 271-284]
  • Azimi, A. Numerical Simulation of 3-D Pollution Propagated from a Gaseous Source Through ‎Indoor Space by Applying Pressure Zonal Model [Volume 8, Issue 1, 2018, Pages 99-109]
  • Azimi, Alireza The effect of interlayer on the microstructural characteristic and mechanical properties of diffusion welding between 17-4PH steel and Ti6Al4V alloy [Volume 12, Issue 3, 2022, Pages 45-56]
  • Azimi, A.R. The effect of diffusion welding parameters on the microstructural characteristics and mechanical properties of dissimilar joint between 17-4PH steel and Ti6Al4V alloy using nickel interlayer [Volume 12, Issue 4, 2022, Pages 41-54]
  • Azimi, Milad Iterative Learning Observer-based Sliding Mode Fault Tolerant Control of a Rigid-Flexible System with External Disturbances [Volume 13, Issue 4, 2023, Pages 39-51]
  • Azimian, ahmadreza Investigation of structural properties of electrosmotic flow in a nanochannel by molecular dynamics simulation [Volume 2, Issue 4, 2013, Pages 77-91]
  • Azimian, A. R. Thermodynamic Analysis of Feed Water Heating Repowering of Mohammad Montazeri Steam Power Plant [Volume 6, Issue 2, 2016, Pages 311-328]
  • Azmoodeh, M. R. Numerical analysis of heat transfer in turbulent reciprocating flow in Stirling engine heat exchanger [Volume 5, Issue 4, 2016, Pages 187-200]
  • Azodi, H. D. Multiobjective Optimization Method for Drawbead and Blank-Holder Force Design in Sheet Metal Forming Process [Volume 6, Issue 2, 2016, Pages 167-179]

B

  • Babaei, H. Experimental Study and Mathematical Modeling of Deformation of Rectangular Plates under the Impact Load [Volume 6, Issue 1, 2016, Pages 143-152]
  • Babaei, H. Plastic deformation of polymeric-coated aluminum plates subjected to gas mixture detonation loading: Part I: Experimental studies [Volume 9, Issue 1, 2019, Pages 71-83]
  • Babaei, H. Plastic deformation of polymeric-coated aluminum plates subjected to gas mixture detonation loading: Part II: Analytical and empirical modelling [Volume 9, Issue 2, 2019, Pages 15-29]
  • Babaei, H. Experimental Investigation of Spot Welding Process on Metallic Targets Impacted by Flat and Conical Projectiles [Volume 9, Issue 3, 2019, Pages 39-49]
  • Babaei, H. A study on plastic response of circular plates under uniformly and locally distributed dynamic loading [Volume 10, Issue 2, 2020, Pages 11-27]
  • Babaei, H. Using GMDH-type neural network model to predict the response of triangular plates under the hydrodynamic loading [Volume 10, Issue 3, 2020, Pages 233-243]
  • Babaei, H. A study on the ballistic performance of single-layered and multi-layered structures impacted by spherical rigid projectile: experimental investigation and modelling [Volume 10, Issue 4, 2021, Pages 125-143]
  • Babaei, H. Experimental investigation of large plastic deformation of single- and multi-layered circular aluminum plates under repeated uniform impulsive loading [Volume 11, Issue 1, 2021, Pages 123-137]
  • Babaei, H. Investigation of the influence of standoff distance of explosive charge on the response of circular metallic plates [Volume 11, Issue 2, 2021, Pages 175-191]
  • Babaei, H. Experimental Investigation into the Behaviour of FMLs Containing Nanoparticles under Repeated Low-velocity Impact [Volume 11, Issue 6, 2022, Pages 187-206]
  • Babaei, Hashem Experimental investigation into the energy absorption of sandwich structures with the core made of waste rubber particles under impact loading [Volume 12, Issue 6, 2023, Pages 13-23]
  • Babaei, M. Analytical and experimental study of fatigue in 7075 aluminum nanocomposite reinforced with silicon carbide particles produced by vortex method [Volume 12, Issue 1, 2022, Pages 85-100]
  • Babaei, M. Detection of Single and Multiple Cracks in Circular Cylindrical Shells Using Modal Analysis and Wavelet Transform [Volume 12, Issue 2, 2022, Pages 13-28]
  • Babaei, M. J. Active vibration control of rotating FGM conical shell via piezoelectric patches [Volume 11, Issue 1, 2021, Pages 13-29]
  • Babaei espooei, Reza Thermodynamic and Exergoeconomic modeling of a modified Organic Rankine Cycle (ORC) augmented with heat exchanger Provided by geothermal source [Volume 12, Issue 5, 2022, Pages 189-200]
  • Badparva, H. Numerical and experimental investigation of deformation length in flexible roll forming process [Volume 11, Issue 6, 2022, Pages 1-14]
  • Badri, M.A. Numerical Simulation of free falling Cylinders using Overset Grid Method [Volume 6, Issue 3, 2016, Pages 1-16]
  • Baesmat, S. Numerical investigating of using the air duct and body side curvature effects on the Tara aerodynamic performance [Volume 13, Issue 1, 2023, Pages 71-86]
  • Baghaee, M. Active Vibration control and reduction of shear force of 5MW wind turbine with the help of gyroscope actuator [Volume 11, Issue 2, 2021, Pages 99-118]
  • Baghani, M. 3D Reconstruction of Carbon Nanotube Composite Using Statistical Correlation Functions [Volume 6, Issue 3, 2016, Pages 33-42]
  • Baghani, Mostafa Modeling the spall in impact of metalic plates, considering the effects of temperature, strain rate and damage [Volume 5, Issue 3, 2015, Pages 39-50]
  • Baghban, Amir Tracing structural static path by dynamic relaxation method [Volume 12, Issue 6, 2023, Pages 35-48]
  • Baghdar Hosseini, Saeed Numerical study of solid-gas two phase flow in air-side of a compact heat exchanger using Lagrangian approach [Volume 8, Issue 2, 2018, Pages 143-159]
  • Bagheri, A. Vehicle yaw stability improvement via active braking system using adaptive sliding mode control [Volume 7, Issue 1, 2017, Pages 65-78]
  • Bagheri, A. Design of ANFIS Control System Using Genetic Algorithm Optimization Method to Vibration Vibration on a Beam [Volume 7, Issue 4, 2018, Pages 1-11]
  • Bagheri, A. Gear Fault Detection Based on Best Feature Selection by Particle Swarm Optimization [Volume 8, Issue 3, 2018, Pages 49-64]
  • Bagheri, A. Noise Removal from the Vibration Signals of the Rotating Machinery Using the Empirical Wavelet Transform and the Conventional Thresholding Methods [Volume 9, Issue 1, 2019, Pages 111-124]
  • Bagheri, A. A New Intelligent Method for Bearing Fault Detection Based on Co-integration Concept and Selecting the Optimal Feature Set at Time-Varying Speed Conditions [Volume 9, Issue 4, 2019, Pages 41-57]
  • Bagheri, A. Sensitivity Analysis of Power Output from Piezoelectric Vibration Constant-Voltage Generator using VBSA and PAWN Method [Volume 11, Issue 2, 2021, Pages 209-218]
  • Bagheri, Amir Numerical Simulation of Magneto-Hydrodynamics Effect on Supersonic Flow of A Projectile [Volume 13, Issue 5, 2023, Pages 43-57]
  • Bagheri, Morteza Optimization of shells with laminated stiffeners for minimum weight and maximum buckling load [Volume 4, Issue 1, 2014, Pages 37-49]
  • Bagheri, Zahra Experimental investigation into the energy absorption of sandwich structures with the core made of waste rubber particles under impact loading [Volume 12, Issue 6, 2023, Pages 13-23]
  • Bagherian, M Experimental study of crack during ceramic drying and compare with the finite element [Volume 4, Issue 1, 2014, Pages 119-129]
  • Bagherian, M. Calculation Diffusion Coefficient of Drying Clay Ceramics Using Firefly Algorithm With Study the Effects of Part Geometry [Volume 5, Issue 4, 2016, Pages 55-67]
  • Bagheri Tofighi, M. Numerical Investigation of the Effects of Material and Number of Metal Layers on Low-Velocity Impact Response of Metal Laminates [Volume 11, Issue 4, 2021, Pages 1-14]
  • Baghestan, K. Hydraulic Hybrid Propulsion System Design and Simulation [Volume 12, Issue 2, 2022, Pages 1-12]
  • Baghestani, Alimohammad Failure prediction in defective pipelines using finite element simulation of fluid-structure interaction and neural network method [Volume 13, Issue 5, 2023, Pages 105-120]
  • Bahadori, R Design of Six-Component Force/Moment Sensor For Cavitation Tunnel [Volume 4, Issue 1, 2014, Pages 131-137]
  • Bahar, A. Identification of LRB isolators using a modified normalized Bouc-Wen model [Volume 7, Issue 1, 2017, Pages 23-33]
  • Bahmaie, B Changing the dynamics of a system by using finite duration inputs: Application to cancer modeling and treatment [Volume 4, Issue 1, 2014, Pages 79-91]
  • Bahrainian, Seyed S. Effect of Air-Fuel Equivalence Ratio on Combustion Process in Furnace of Razi Petrochemical Company’s Ammonia Unit [Volume 11, Issue 5, 2021, Pages 119-132]
  • Bahrainian, Seyed S. Development of an applied relationship for pressure drop estimation in tri-cone drill bit using Bingham rheological model [Volume 11, Issue 6, 2022, Pages 45-57]
  • Bahrami, S. Robust adaptive controller Design for an autonomous robot with time-varying dynamics [Volume 7, Issue 4, 2018, Pages 147-158]
  • Bahri, A. Finite element modeling of debonding behavior of the adhesively bonded joints between sandwich panel and pultruded profile in flexural loading [Volume 6, Issue 1, 2016, Pages 107-116]
  • Bakhsheshy, A. The study of the effects of thermal environment on Free Vibration analysis of two-dimensional Functionally Graded Rectangular plates on Pasternak elastic foundation [Volume 6, Issue 3, 2016, Pages 137-147]
  • Bakhshi, M. Experimental and numerical investigation of the sheet forming in hydroforming process [Volume 5, Issue 4, 2016, Pages 27-33]
  • Bakhshi, M. Optimization of the Initial Blank Shape in hydroforming Double-Stepped Parts [Volume 5, Issue 3, 2015, Pages 137-149]
  • Bakhsh Zahmatkesh, B. Performance evaluation of Ferric oxide (Fe3O4) and Graphene nanoplatelet (GNP) nanoparticles in solar steam generation [Volume 9, Issue 2, 2019, Pages 181-196]
  • Bak khoshnevis, A. The Investigation of the effect of the helical strakes'height on the cylindrical wake [Volume 10, Issue 1, 2020, Pages 223-236]
  • Bak Khoshnevis, A. Experimental Investigation of wake on an elliptic cylinder in the presence of tripping wire [Volume 7, Issue 2, 2017, Pages 149-163]
  • Bak Khoshnevis, Abol Amir Experimental Investigation of Air Flow Velocity Profiles Effects on the Wires and Cables of Power Transmission Lines and Supporting Devices [Volume 2, Issue 1, 2012, Pages 83-97]
  • Balakheli, Mohammad Mahdi Thermodynamic and economic analyses of combined generation system based on hybrid prime mover of internal and external combustion engines with natural gas and biomass power sources [Volume 13, Issue 6, 2024, Pages 103-119]
  • Baluchzadeh, Maryam Optimal Discrete-Time Control of Robot Manipulators in Repetitive Tasks [Volume 2, Issue 3, 2012, Pages 35-44]
  • Baniassadi, M. 3D Reconstruction of Carbon Nanotube Composite Using Statistical Correlation Functions [Volume 6, Issue 3, 2016, Pages 33-42]
  • Baniassadi, M. Stress and Strain Analysis of Femur in Taylor Spatial Frame [Volume 8, Issue 1, 2018, Pages 13-21]
  • Baniassadi, Majid Modeling the spall in impact of metalic plates, considering the effects of temperature, strain rate and damage [Volume 5, Issue 3, 2015, Pages 39-50]
  • Baqeri Kazazi, Shirin Enhancing the performance of Bi-stable Energy Harvester using Chaos control [Volume 11, Issue 2, 2021, Pages 1-14]
  • Barari, B. Numerical simulation of thermal storage using phase-change material [Volume 7, Issue 2, 2017, Pages 189-213]
  • Barati, E. The impact analysis on airfield matting plate with considering the aircraft tyre deflection [Volume 8, Issue 2, 2018, Pages 69-79]
  • Barati, E. Numerical and experimental fatigue life estimation of airplane emergency door bracket in various mission profiles [Volume 8, Issue 4, 2019, Pages 143-152]
  • Barati, F. Experimental Analysis on the Geometric Parameters of the Composite Metal Matrix Patch to Repair Cracked Aluminum Part [Volume 11, Issue 3, 2021, Pages 85-96]
  • Barati, Farzan An experimental investigation on the influence of geometrical configuration of copper patches on mechanical strength of cracked titanium components using diffusion method [Volume 13, Issue 3, 2023, Pages 85-96]
  • Baraty beni, S. Study of the effect of nano-fluid in the diesel-cooled diesel engine oil cooler [Volume 8, Issue 2, 2018, Pages 221-233]
  • Barazandeh, H. Experimental Investigation of Cavitation Phenomena Around the Body with the Conic Nose and Cylindrical Afterbody [Volume 9, Issue 2, 2019, Pages 249-259]
  • Barid Rezaee, M. Analytical study on flexural behaviour of fiber and steel reinforced concrete beams [Volume 7, Issue 3, 2017, Pages 113-131]
  • Barimani Varandi, A. Numerical and experimental study on the effect of forming speed in gradient warm deep drawing process [Volume 8, Issue 2, 2018, Pages 51-66]
  • Barkhordari, H. Local entropy generation analysis for a single slope solar still (Numerical investigations) [Volume 7, Issue 4, 2018, Pages 279-291]
  • Baroutie Ardestanie, M. Thermodynamics modeling of heat and vapor transfer in the shell- and- tube membrane humidifier: a gas- to- gas type [Volume 5, Issue 3, 2015, Pages 223-236]
  • Bashi, H. Numerical investigation of temperature field and laminar flame structure of inclined impinging jets of methane and hydrogen [Volume 9, Issue 4, 2019, Pages 251-261]
  • Bashirnezhad Dehghan, H. Crack analysis in diffusion-generalized thermoelasticity problems using the extended finite element method [Volume 11, Issue 5, 2021, Pages 63-82]
  • Basti, A. Multi-objective optimization of electrochemical machining parameters using response surface methodology [Volume 7, Issue 4, 2018, Pages 49-60]
  • Bathaee, Seyed hasan Sensitivity analysis of peripheral parameters in three dimentional nano-manipulation by using HK model [Volume 9, Issue 2, 2019, Pages 123-139]
  • Batooei, A. R Numerical analysis of heat transfer in turbulent reciprocating flow in Stirling engine heat exchanger [Volume 5, Issue 4, 2016, Pages 187-200]
  • Bayani Ahangar, Sh. Experimental investigation on the effect of preprocessing in fabrication of superhydrphobic surfaces on laminar drag reduction [Volume 8, Issue 4, 2019, Pages 239-248]
  • Bayati Chaleshtari, M. H. Investigation of Effective Parameters on Triangular Cutout Stress in Finite Isotropic Plates [Volume 7, Issue 1, 2017, Pages 35-50]
  • Bazargan lari, Y. Frequency Analysis of Bi-directional Porous Functionally Graded Beams with Variable cross section on Elastic Foundation using Reddy Third Order Shear Deformation Theory [Volume 11, Issue 3, 2021, Pages 97-118]
  • Bazazzadeh, M. Numerical Study of Dielectric Barrier Discharge (DBD) Plasma Actuators on Separation Control of Supersonic Flow [Volume 11, Issue 4, 2021, Pages 133-148]
  • Bazazzadeh, M. Prediction of splitting airfoils horizontal spacing effects on loss distribution in an array distortion generator based on comparison of RANS, URANS and DES [Volume 11, Issue 5, 2021, Pages 211-223]
  • Bazazzadeh, M. Investigating the effect of induced centrifugal force resulting from duct geometry on the propagation speed of premixed flame using OpenFOAM software [Volume 13, Issue 1, 2023, Pages 111-124]
  • Bazdidi Tehrani, F. Analysis of mixed convection heat transfer of CuO-water nanofluid in a vertical square duct using two phase Euler-Lagrange approach [Volume 6, Issue 2, 2016, Pages 227-244]
  • Bazdidi-Tehrani, F. Analysis Of Turbulent Combined Heat Transfer (Mixed Convection-Thermal Radiation) Heat Transfer in a Vertical Three Dimensional Duct With Variable Thermo-physical Properties [Volume 8, Issue 1, 2018, Pages 83-97]
  • Bazdidi-Tehrani, F. Flow Field Analysis of a Synthetic Jet in the Presence of a Crossflow: Application of Different Turbulence Models [Volume 8, Issue 4, 2019, Pages 197-210]
  • Behbahani Nezhad, M. An Efficient Approach to Calculate the Amount of Released Gas in Branched Networks Considering Minor Loss Effects [Volume 5, Issue 2, 2015, Pages 271-284]
  • Beheshti Aval, S.B. Seismic characteristics of tunnel form concrete buildings with irregular plan [Volume 5, Issue 3, 2015, Pages 1-15]
  • Behinfar, Parsa Analytical and Numerical Solution for Auxetic Stent with Re-entrant Geometry and its Multi-Objective Optimization [Volume 12, Issue 6, 2023, Pages 125-137]
  • Behjat, Ba. 3-D bending analysis of thick functionally graded plate in different boundary conditions using Element-Free Galerkin (EFG) method [Volume 6, Issue 2, 2016, Pages 109-120]
  • Behnia, M. بررسی عملکرد فن گریز از مرکز یک توربین سرمایشی با استفاده از شبیه‌سازی عددی [Volume 6, Issue 2, 2016, Pages 245-257]
  • Beigmoradi, S. Numerical Investigation and Enhancement of Flushing Performance in the Micro-Electro Discharge Machining by Considering the Hole Depth and Dielectric Fluid [Volume 11, Issue 1, 2021, Pages 111-122]
  • Beigzadeh, Borhan Modeling and simulation of the interaction forces between the gait rehabilitation system with a musculoskeletal-model of human body [Volume 12, Issue 6, 2023, Pages 1-12]
  • Beiraghi, Hamid Investigation of the fundamental period for the moment resistant frame [Volume 2, Issue 2, 2012, Pages 1-11]
  • Besharat Ferdowsi, S. Numerical simulation of buckling and postbuckling of single wall carbon nanotubes [Volume 5, Issue 1, 2015, Pages 77-86]
  • Beyraghi Baranlou, R. Experimental study of subsurface damage and material removal mechanisms in abrasive waterjet milling process of aluminum oxide ceramic [Volume 10, Issue 2, 2020, Pages 253-265]
  • Bidarian, V. Modelling and Optimization of Geometrical Parameters in Design of the Wavy-Fin-Plate Compact Heat Exchanger by Taguchi method [Volume 12, Issue 3, 2022, Pages 89-101]
  • Biglari, H. Parametric Investigation of Buckling Capacity Improvement of Cracked Columns with Piezoelectric Patches [Volume 6, Issue 3, 2016, Pages 55-64]
  • Biglari, H. Green’s functions resulting from wave propagation in a single-layer porous isotropic foam with finite thickness [Volume 12, Issue 4, 2022, Pages 13-26]
  • Biglari, M. Numerical Solution of Natural Convective Heat Transfer of Al2O3/Water Nanofluids in a Square Cavity with Modified Circular Corners [Volume 7, Issue 1, 2017, Pages 315-328]
  • Bina, R. Investigation of instability and vibration behavior of microbeam-gyroscope with considering distribution of proof mass [Volume 8, Issue 2, 2018, Pages 93-106]
  • Binabaji, Y. Computational simulation of airflow in the human trachea-bronchial airways [Volume 8, Issue 2, 2018, Pages 125-142]
  • Bohlooli, H. Feasibility of Aluminum-Copper Bimetallic Bar Production by Combined Equal Channel Angular Pressing and Direct Extrusion Process [Volume 11, Issue 2, 2021, Pages 193-207]
  • Boloki, M. The Investigation of the effect of the helical strakes'height on the cylindrical wake [Volume 10, Issue 1, 2020, Pages 223-236]
  • Borhani, Mohammad Amin Comparative investigation of nanofluid heat transfer in vertical annular channel with cosine heat flux by experimental and numerical methods [Volume 13, Issue 4, 2023, Pages 147-158]
  • Borji Bodaghi, M. Thermodynamic analysis and Pareto optimization of hybrid system consisting of biomass gasification, solid oxide fuel cell and gas turbine [Volume 7, Issue 1, 2017, Pages 113-133]
  • Boromand, M. Analysis of Surface Roughness Effects on the Performance of a Gas Turbine Stage [Volume 6, Issue 2, 2016, Pages 197-212]
  • Bozorg, M. Robust estimation of spring stiffness in a Shape Memory Alloy actuator using Extended Kalman Filter [Volume 5, Issue 4, 2016, Pages 69-81]
  • Broumand, P. Analytical study on flexural behaviour of fiber and steel reinforced concrete beams [Volume 7, Issue 3, 2017, Pages 113-131]

C

  • Chalabi, J. Numerical simulation of ultra high performance fibre reinforced concrete panels subjected to underwater blast loading [Volume 7, Issue 3, 2017, Pages 149-163]
  • Chamani, H.R. Predicting macromechanical behavior of dual phase steels based on actual micromechanical modeling [Volume 5, Issue 1, 2015, Pages 31-38]
  • Changizian, M. An Efficient Approach to Calculate the Amount of Released Gas in Branched Networks Considering Minor Loss Effects [Volume 5, Issue 2, 2015, Pages 271-284]
  • Chavoshnejad, P. Stress and Strain Analysis of Femur in Taylor Spatial Frame [Volume 8, Issue 1, 2018, Pages 13-21]
  • Chegini, Reyhaneh Modeling and simulation of the interaction forces between the gait rehabilitation system with a musculoskeletal-model of human body [Volume 12, Issue 6, 2023, Pages 1-12]
  • Cheloee Darabi, A. Predicting macromechanical behavior of dual phase steels based on actual micromechanical modeling [Volume 5, Issue 1, 2015, Pages 31-38]
  • Cheraqi, A. Exergy Analysis and Numerical Investigation of the Effects of Nozzle Profile on the Partially-Admitted Supersonic Turbine's Performance [Volume 11, Issue 1, 2021, Pages 169-184]
  • Cheshm Avar, A. Sensitivity Analysis of Power Output from Piezoelectric Vibration Constant-Voltage Generator using VBSA and PAWN Method [Volume 11, Issue 2, 2021, Pages 209-218]
  • Chitgarha, F. Identification of the Droplet Group Combustion Formation Region by the Flame Index Parameter in the Laminar Counterflow Spray [Volume 11, Issue 1, 2021, Pages 212-199]
  • Chitsazi, F. Evaluation of Performance of both Spiral and Direct Tube Heat Exchanger Using the Hybrid Nano fluid [Volume 10, Issue 1, 2020, Pages 193-207]

D

  • Dadgar Asl, Y. Numerical and Experimental Analysis of Spring-back Defect in Flexible Roll Forming Process using Anisotropic Yield Criteria [Volume 11, Issue 4, 2021, Pages 93-105]
  • Dadgar Asl, Y. Numerical and experimental investigation of deformation length in flexible roll forming process [Volume 11, Issue 6, 2022, Pages 1-14]
  • Dadgar Asl, Yaghoob Numerical and Experimental Analysis of Bowing Defect in the Flexible Roll Forming Process of Copper-Aluminum Double Layer Sheets [Volume 13, Issue 6, 2024, Pages 75-87]
  • Dadrasi, A. An Experimental Study and Statistical Modelling on Compressive Properties of Epoxy/ Graphene/ Hydroxyapatite Nanocomposites [Volume 8, Issue 1, 2018, Pages 59-70]
  • Dadrasi, A. Study of stress-strain behavior of cracked polycrystalline boron carbide structure in the presence of crack arrest and in different temperature conditions by molecular dynamics method [Volume 11, Issue 5, 2021, Pages 95-105]
  • Dadvand, A. Numerical simulation of incompressible viscous external flow using mesh-free lattice Boltzmann method [Volume 4, Issue 4, 2015, Pages 175-189]
  • Daei, Maryam The Formation Of Optimal Null Basis Vectors For The Force Method Analysis Of Finite Element Models Comprising Tetrahedron Elements Using Ant Colony Algorithm [Volume 4, Issue 3, 2014, Pages 1-9]
  • Daei, Maryam Structural Analysis of Persian Historical Brick Masonry Minarets under Wind Load [Volume 5, Issue 1, 2015, Pages 165-176]
  • Dalayeli, H. Vibration analysis of continuous rotor-bearing system under various defects of unbalances [Volume 7, Issue 4, 2018, Pages 223-237]
  • Dallakehnezhad, M. Numerical simulation of the dynamic and thermodynamic an MHD micropump by independently changing the lengths of electric and magnetic fields [Volume 5, Issue 3, 2015, Pages 271-287]
  • Damya, Amin Investigating the effect of the geometry of gas injection channels on the performance and dynamic behavior of the polymer electrolyte membrane fuel cell [Volume 13, Issue 2, 2023, Pages 121-128]
  • DANANDEH OSKUEI, HOJJAT Numerical investigation of the effect of an elastic wall on Heat Transfer around a cylinder within a channel [Volume 12, Issue 5, 2022, Pages 47-58]
  • Daneh Dezfuli, A. R. Simulation of Two-Phase Oil and Air Flow of the Lower Bearing of Shahid Abbaspour Dam Power Plant Generator [Volume 9, Issue 1, 2019, Pages 203-216]
  • Daneh Dezfuli, A.R. Effect of Air-Fuel Equivalence Ratio on Combustion Process in Furnace of Razi Petrochemical Company’s Ammonia Unit [Volume 11, Issue 5, 2021, Pages 119-132]
  • Daneshgar, E. Numerical Simulation of 3-D Pollution Propagated from a Gaseous Source Through ‎Indoor Space by Applying Pressure Zonal Model [Volume 8, Issue 1, 2018, Pages 99-109]
  • Daneshipour, M. Determination of the diameter ratios for minimum entropy generation in a borehole geothermal heat exchangers using numerical simulation of the flow and heat transfer [Volume 6, Issue 1, 2016, Pages 249-258]
  • Daneshvar, Armin Numerical simulation of buckling and postbuckling of single wall carbon nanotubes [Volume 5, Issue 1, 2015, Pages 77-86]
  • Dardel, Morteza Identification of a Generalized Prandtl-Ishlinskii Model for a Micro Positioning System Actuated by Shape Memory Alloys Actuator [Volume 13, Issue 2, 2023, Pages 15-25]
  • Darvizeh, A. Experimental study of the influence of mixing method of nanoclay on mechanical properties of polymer composites and fiber metal laminates [Volume 7, Issue 2, 2017, Pages 63-80]
  • Darzi-Naftchali, Rohollah Application of differential transform method to determine natural frequencies of variable width Euler- Bernoulli beam with various support conditions [Volume 3, Issue 2, 2013, Pages 41-50]
  • Dashti, M. A. Optimal search of heat sources location in conjugate natural convection with surface radiation in a two-dimensional enclosure utilizing particle swarm optimization algorithm [Volume 8, Issue 2, 2018, Pages 177-191]
  • Dashti Mahmoud-abadi, B. Numerical simulation of Lucid spherical turbine and investigation the effect of different parameters of blades on its performance [Volume 12, Issue 1, 2022, Pages 115-131]
  • Dashti Rahmatabadi, A. Effects of design and lubrication parameters on thermo-hydrodynamic performance of noncircular three lobe journal bearings with micropolar lubricant [Volume 6, Issue 3, 2016, Pages 79-96]
  • Dashti Rahmatabadi, A. Investigation of Stability of Noncircular Lobed Journal Bearings Lubricated by Ferrofluid [Volume 7, Issue 2, 2017, Pages 165-177]
  • Dashti Rahmatabadi, A. Effect of Using Nano Lubricant Containing TiO2 Particles on the Performance of Noncircular Two Lobe Journal Bearings [Volume 12, Issue 3, 2022, Pages 103-116]
  • Dastourani, H. A Numerical Study of Emulsification Process in Microfluidic Flow-Focusing Devices [Volume 6, Issue 1, 2016, Pages 273-284]
  • Dastourani, H. Evaluation of Effect of Taper Ratio on Aerodynamic Characteristics of MAVs with Inspired from Insects Wing [Volume 6, Issue 4, 2016, Pages 223-238]
  • Davar, A. Free Vibration Analysis of Carbon Nanotube Grid Composite Cylindrical Shell with First-Order Shear Deformation Theory [Volume 10, Issue 4, 2021, Pages 77-96]
  • Davari, H. Numerical and Experimental Investigation into Heat Transfer Process in a Fluidized Bed of Alumina Powder [Volume 6, Issue 4, 2016, Pages 263-274]
  • Davari, Hossein Numerical investigation of the effects of Helmholtz resonator and primary flow oscillations on subsonic ejector performance [Volume 13, Issue 5, 2023, Pages 19-42]
  • Davari, S. Experimental study of the effects of adding methylated homopolymer to gasoline on the engine performance and pollutant emissions [Volume 11, Issue 5, 2021, Pages 199-210]
  • Davodabadi, S. Investigation and Analysis Effect of Environment Conditions on Cost Function, Energy and Exergy Efficiency of a Solar Tower (6MW) in Several Cities of Iran [Volume 10, Issue 4, 2021, Pages 373-386]
  • Davoodabadi Farahani, Somayeh Effect of Environmental Conditions on Solar Chimney:Exergy and Economic Analysis and Choosing the Appropriate City [Volume 11, Issue 1, 2021, Pages 351-364]
  • Davood Abadi Farahani, S. Online Estimation of Heat Flux Using Tikhonov Digital Filter Method and Mollified Measured Temperatures [Volume 10, Issue 1, 2020, Pages 237-252]
  • Davoodi, B. On the effects of cryogenic cooling and lubrication with Nanofluid on surface roughness and tool wear in A286 superalloys turning [Volume 7, Issue 4, 2018, Pages 73-85]
  • Davoodi, Fahimeh Tissue Temperature Control in a Bio-Heat Transfer Equation with the Conjugate Gradient Method [Volume 13, Issue 3, 2023, Pages 159-170]
  • Dehdari, M. Effect of state feedback controller on dynamic behavior of a rotor supported by active magnetic bearings [Volume 11, Issue 6, 2022, Pages 15-26]
  • Dehghan, A. A. Numerical solution to the multi- layer core- annular flow of two fluids with different viscosities using Spectral Element Method [Volume 8, Issue 4, 2019, Pages 249-260]
  • Dehghan, A.A. Numerical Investigation of the Effect of Different Inflow Conditions on Turbulent Boundary Layer Flow Characteristics using Large-Eddy Simulation [Volume 9, Issue 2, 2019, Pages 261-274]
  • Dehghan, A.A. Numerical Investigation of the Aeroacoustic Behaviours Around an Airfoil by LES, DES and RANS Aproachs [Volume 10, Issue 4, 2021, Pages 345-356]
  • Dehghan, M. Investigation of the effect of geometrical parameters on the out-of-plane displacement of a T-shaped piezoelectric microcantilever [Volume 8, Issue 4, 2019, Pages 1-9]
  • Dehghan, Mehdi Nonlinear Thermo-Elastic Analysis of FG Cylinder with Temperature-Dependent Properties with Perturbation and Differential Quadrature Methods [Volume 13, Issue 4, 2023, Pages 1-14]
  • Dehghani, D. Investigation of operational parameters on the motional behavior and maximum particle levitated density in ultrasonic levitation [Volume 11, Issue 3, 2021, Pages 71-84]
  • Dehghani, M. The impact analysis on airfield matting plate with considering the aircraft tyre deflection [Volume 8, Issue 2, 2018, Pages 69-79]
  • Dehghani Mobarake, M. Stability Analysis of Natural Convection with Variable Physical Coefficients Using Linear Stability Theory [Volume 8, Issue 1, 2018, Pages 157-169]
  • Dehghan Manshadi, M. The evaluation of the angle of attack effects on structure of diamond wing with sharp leading edge being equipped with LEX by using flow visualization [Volume 9, Issue 3, 2019, Pages 265-275]
  • Dehghan Manshadi, M. Numerical Investigation of the Aeroacoustic Behaviours Around an Airfoil by LES, DES and RANS Aproachs [Volume 10, Issue 4, 2021, Pages 345-356]
  • Dehghan Manshadi, M. Prediction of splitting airfoils horizontal spacing effects on loss distribution in an array distortion generator based on comparison of RANS, URANS and DES [Volume 11, Issue 5, 2021, Pages 211-223]
  • Dehghan Manshadi, M. Experimental Study of LEX Angle Effect on Vortical Flow Over the Diamond Wing with Airfoil-Shaped Section by Using Hot-wire and Five-hole Probe [Volume 12, Issue 2, 2022, Pages 81-91]
  • Dehghanzadeh Bafghi, M. Numerical analysis of mixed electroosmotic/pressure driven flow using an improved weakly compressible Smoothed Particle Hydrodynamics method [Volume 11, Issue 4, 2021, Pages 121-131]
  • Delbari, Seyed Ali Vibration Analysis of Circular Nanoplates under Nonlinear Electrostatic Excitation Considering the Surface Energy and Size Effects [Volume 12, Issue 5, 2022, Pages 133-146]
  • Deldar, S. Study and Investigation of Secondary Sedimentation Tank Equipped with Lamella using Discrete Phase Model (DPM) [Volume 9, Issue 1, 2019, Pages 173-186]
  • Delfani, Sh. Numerical investigations of the influence of effective parameters on efficiency of DASC with CuO-H2O nanofluid [Volume 7, Issue 1, 2017, Pages 91-100]
  • Delouei, A. Amiri Applying ‘SHARP’ Interface Scheme in the Immersed Boundary–Lattice Boltzmann Method [Volume 4, Issue 4, 2015, Pages 157-174]
  • Dezfouli, Mohsen Two-dimensional simulation of laminar flow around four two-degree-of-freedom cylindrical cylinders in a rectangular arrangement using random vortex-boundary element method [Volume 13, Issue 6, 2024, Pages 169-184]
  • Dinarvand, S. Numerical study of the effect of phase change materials containing multi-walled carbon nanotubes on improving the heat sink performance of electrical equipment [Volume 13, Issue 1, 2023, Pages 25-41]
  • Divsalar, Ali Failure prediction in defective pipelines using finite element simulation of fluid-structure interaction and neural network method [Volume 13, Issue 5, 2023, Pages 105-120]
  • Djavareshkian, M.H. Evaluation of Effect of Taper Ratio on Aerodynamic Characteristics of MAVs with Inspired from Insects Wing [Volume 6, Issue 4, 2016, Pages 223-238]
  • Dodange, D. The effects of processes heating and evaporation of droplet on the Low frequency combustion instability [Volume 7, Issue 4, 2018, Pages 251-265]
  • Dolati, F. Numerical investigation of collecting wire electrode effect on the flow field and heat transfer with electrohydrodynamic actuator [Volume 6, Issue 1, 2016, Pages 201-213]
  • Dolati, F. Numerical Investigation of the Effect of Corona Discharge on the Heat Transfer and Pressure Drop over a Single Slot [Volume 6, Issue 4, 2016, Pages 205-221]
  • Dolati, Farid Numerical Investigation of the Electric Field Effects on the Flow and Forced Convection Heat Transfer over a Backward-acing Step [Volume 5, Issue 2, 2015, Pages 233-248]
  • Domiri Ganji, D. Numerical study of effect of inlet flow turbulent on trajectory and breakup of liquid jet in crossflow [Volume 9, Issue 2, 2019, Pages 167-179]
  • Doustdar, M.M. Numerical simulation of radiance effects on the aerodynamic heating of ablative nose with VSL-VBLS method [Volume 7, Issue 1, 2017, Pages 175-186]

E

  • Ebrahimi, R. Numerical Simulation of One Dimensional Pulsed Plasma Thruster with Solid Propellant [Volume 7, Issue 1, 2017, Pages 161-173]
  • Ebrahimi, R. Exergy Analysis and Numerical Investigation of the Effects of Nozzle Profile on the Partially-Admitted Supersonic Turbine's Performance [Volume 11, Issue 1, 2021, Pages 169-184]
  • Ebrahimi, Reza Unbalance response of a spinning pipe conveying fluid in vertical configuration equipped with piezoelectric patches [Volume 13, Issue 3, 2023, Pages 55-66]
  • Ebrahimi mamaghani, A. An Experimental Investigation into Width Reduction Effect on the Efficiency of Piezopolymer Vibration Energy Harvester [Volume 7, Issue 3, 2017, Pages 41-51]
  • Ebrahimi Mamaghani, A. Free lateral vibration analysis of inhomogeneous beams under various boundary conditions [Volume 8, Issue 3, 2018, Pages 123-135]
  • Ebrahimi Mamaghani, A. Vibrational behavior of viscoelastic AFG rotating micro-beam with longitudinal motion under axial load in magnetic field based on the modified couple stress theory [Volume 10, Issue 3, 2020, Pages 159-180]
  • Ebrahimi Mamaghani, A. Parametric dynamical investigation of axially graded spinning tubes conveying fluid by considering scale effects [Volume 10, Issue 4, 2021, Pages 145-163]
  • Ebrahimi Mamaghani, Ali Target energy transfer from a doubly clamped beam subjected to the harmonic external load using nonlinear energy sink [Volume 8, Issue 4, 2019, Pages 165-177]
  • Ebrahimi Mamaghani, Ali Stability and dynamic analysis of Rayleigh functionally graded porous beams with longitudinal motion in hygro-thermo-magnetic environments [Volume 13, Issue 2, 2023, Pages 1-13]
  • Ebrahimnezhad-Khaljiri, H. Study of the Compressive Behavior of Fiber-Metal Hybrid Structures Reinforced by Jute-Glass Fibers [Volume 8, Issue 4, 2019, Pages 153-164]
  • Ebrahimnia-Bajestan, Ehsan On the Effect of Blood Flow and Oxygen Mass Transfer on Development of Atherosclerosis [Volume 4, Issue 2, 2014, Pages 119-132]
  • Ebrahimzadeh Azghadi, F. Using of AUSM+ Method for Improving the Results and Reducing Numerical Eror of Jameson's 2D Finite Volume Technique in Turbine Stator Blades [Volume 5, Issue 4, 2016, Pages 201-212]
  • Ebrahimzadeh Azghadi, F. Evaluate the Performance of the Scalar and Cusp Central Difference Schemes, AUSM+ Upwind Method in Very Low Mach Number up to Supersonic Flow [Volume 6, Issue 1, 2016, Pages 225-237]
  • Eftekhari, M. Evaluation of Ultrasonic Method Capability in Measurement of Longitudinal Welding Residual Stress through Thickness [Volume 8, Issue 3, 2018, Pages 29-47]
  • Eftekhari, M. Analysis of FGM Rotating Disk Based on Non-Fourier Heat Conduction Model under Electromagnetic Field [Volume 11, Issue 4, 2021, Pages 53-70]
  • Eftekhari, Mohammad Evaluation of longitudinal residual stress variations along the thickness of welded joint of 5086 aluminum alloy [Volume 7, Issue 3, 2017, Pages 1-16]
  • Eftekhari, Seyyed E. Determination of Johnson-Cook damage model constants for commercial pure copper sheet by tensile testing on notched specimens [Volume 11, Issue 1, 2021, Pages 97-110]
  • Eftekhari Shahri, S. E. Design of tube Hydroforming system with the Die Ultrasonic Vibration. [Volume 5, Issue 1, 2015, Pages 135-148]
  • Eghdami, Zahra Experimental and theoretical investigation of Young's modulus of liver cancer tissue using rectangular, V-shaped and dagger cantilevers of an atomic force microscope [Volume 13, Issue 5, 2023, Pages 121-135]
  • Eghlimidezh, Marzieh Iterative Learning Observer-based Sliding Mode Fault Tolerant Control of a Rigid-Flexible System with External Disturbances [Volume 13, Issue 4, 2023, Pages 39-51]
  • Ehsani, Amir Effect of Grid Configuration on Buckling and Vibration Response of Composite Grid Plates [Volume 5, Issue 3, 2015, Pages 93-100]
  • Ehsani, M. Online health monitoring of marine structures using electromechanical impedance spectroscopy: A simulation approach [Volume 10, Issue 4, 2021, Pages 67-76]
  • Ehsaniseresht, Abbas Investigating the influence of bearings elastic properties on nonlinear dynamics of unbalanced induction motors shaft in presence of asymmetric magnetic pull [Volume 13, Issue 5, 2023, Pages 137-153]
  • Ekrami Jolandan, N. Analysis of mixed convection heat transfer of CuO-water nanofluid in a vertical square duct using two phase Euler-Lagrange approach [Volume 6, Issue 2, 2016, Pages 227-244]
  • Elhami, B. Numerical Investigation of the Aeroacoustic Behaviours Around an Airfoil by LES, DES and RANS Aproachs [Volume 10, Issue 4, 2021, Pages 345-356]
  • Elyasi, Majid Experimental investigation of the formability of heat treated AA6063 tubes using hydraulic rotary draw bending process [Volume 13, Issue 4, 2023, Pages 95-106]
  • Emam, S. M. Simulation of Anodic Dissolution in Electrochemical Machining and Tool Design using the Sensitivity Method [Volume 6, Issue 1, 2016, Pages 239-248]
  • Emam, S.M Investigation of rubber formulation by measuring ultrasonic propagation velocity [Volume 6, Issue 2, 2016, Pages 285-294]
  • Emdadi Hor, V. Analysis Of Turbulent Combined Heat Transfer (Mixed Convection-Thermal Radiation) Heat Transfer in a Vertical Three Dimensional Duct With Variable Thermo-physical Properties [Volume 8, Issue 1, 2018, Pages 83-97]
  • Esapour Darzi, M. Effect of increasing number and arrangement of hot fluid tube on melting behavior of Phase Change Material in a triplex tube heat exchanger [Volume 6, Issue 4, 2016, Pages 249-262]
  • Eshaghi Gorji, mohammad Experimental Investigation of Air Flow Velocity Profiles Effects on the Wires and Cables of Power Transmission Lines and Supporting Devices [Volume 2, Issue 1, 2012, Pages 83-97]
  • Eshagh Nimvari, M. Computational Fluid Dynamics Simulation of Ljungstrom Rotary Preheater in Steam Power Plant for Leakage Assessment Using Porous Media Approach [Volume 11, Issue 4, 2021, Pages 179-190]
  • Eshghi, E. Sheet EMF using convex punch instead of concave die [Volume 6, Issue 1, 2016, Pages 29-42]
  • Eskandari jam, Jafar Numerical and Experimental Analysis of the Effect of Material, Diameter and Number of wires as the Reinforcements of the Foam Core in the Bending Strength of Sandwich Panels [Volume 13, Issue 4, 2023, Pages 67-81]
  • Eskandari Jam, J. Free Vibration Analysis of Carbon Nanotube Grid Composite Cylindrical Shell with First-Order Shear Deformation Theory [Volume 10, Issue 4, 2021, Pages 77-96]
  • Eslami, Mohammad Hossein Numerical and experimental study of orthogonal cutting bone using elastic-plastic material model and dynamic damage model [Volume 12, Issue 6, 2023, Pages 49-65]
  • Eslami-Farsani, R. An Experimental Study on Drop weight Impact Properties of Composite Laminates Aluminum/Epoxy Resin with Fibers Reinforcement [Volume 5, Issue 4, 2016, Pages 97-104]
  • Eslami-Farsani, R. Study of the Compressive Behavior of Fiber-Metal Hybrid Structures Reinforced by Jute-Glass Fibers [Volume 8, Issue 4, 2019, Pages 153-164]
  • Eslami-Farsani, R. The effective parameters on shear properties of sandwich panels with glass fibers-vinyl ester composite skin and polyvinyl chloride core [Volume 10, Issue 1, 2020, Pages 53-64]
  • Eslami-Farsani, Reza The effects of the single filament and the fiber tow test methods on mechanical properties of carbon fibers [Volume 3, Issue 2, 2013, Pages 1-10]
  • Eslami Majd, A. A Numerical Study of Emulsification Process in Microfluidic Flow-Focusing Devices [Volume 6, Issue 1, 2016, Pages 273-284]
  • Esmaeeli, A. Numerical Investigation of Polygonal Hydraulic Jump Formation Mechanism and its Flow Structure [Volume 9, Issue 3, 2019, Pages 191-203]
  • Esmaeeli, H. Adaptive Backstepping Control for 4 DOF SCARA Robot in the Presence of Uncertainties [Volume 5, Issue 4, 2016, Pages 297-307]
  • Esmaeel zadeh vali, Shahab Effect of Tip Injection on Tip Leakage Flow Structure in Axial Compressor [Volume 12, Issue 5, 2022, Pages 147-160]
  • Esmaeili, A. Sensitivity Analysis of Power Output from Piezoelectric Vibration Constant-Voltage Generator using VBSA and PAWN Method [Volume 11, Issue 2, 2021, Pages 209-218]
  • Esmaeilian, M. Thickness optimization of the airplane wing box components by the design of experiments method [Volume 13, Issue 1, 2023, Pages 43-56]
  • Esmaeili Marzdashti, S. Study on the collapse behavior of multi-cell conical structures and their optimization using artificial neural networks [Volume 7, Issue 2, 2017, Pages 111-127]
  • Esmaeili Marzdashti, S. Comparison of energy absorption performance of multi-walled square and circular structures using COPRAS method and optimization of circular structures using RSM [Volume 7, Issue 3, 2017, Pages 133-147]
  • Esmaeli, Ali Numerical Simulation of Magneto-Hydrodynamics Effect on Supersonic Flow of A Projectile [Volume 13, Issue 5, 2023, Pages 43-57]
  • Esmailpour Hamedani, S. Nonlinear Vibration Analysis of Micro Rotating Euler- Bernoulli Beams Subjected to Loading Based on the Strain Gradient Theory [Volume 10, Issue 3, 2020, Pages 181-193]
  • Estiri, Hossein Tracing structural static path by dynamic relaxation method [Volume 12, Issue 6, 2023, Pages 35-48]
  • Etedali, S. Novel mathematical models based on regression analysis scheme for optimum tuning of TMD parameters [Volume 6, Issue 4, 2016, Pages 59-75]
  • Etemadi, E. Experimental and numerical analysis of effective geometrical parameters for energy absorbing of the structures with negative Poisson's ratio made from aluminium alloy 1100 [Volume 11, Issue 1, 2021, Pages 311-324]
  • Ettefagh, M. Damage Diagnosis of the Beam-Like Structures Using Recued Model Updating and Iterative Method [Volume 5, Issue 2, 2015, Pages 83-97]
  • Ezadi Yazdi, M. J. Experimental Investigation of wake on an elliptic cylinder in the presence of tripping wire [Volume 7, Issue 2, 2017, Pages 149-163]
  • Ezadi Yazdi, M.J. Experimental Investigation of Effects of Split Blended Winglet at Tip Vortex Structure of Micro-Aerial Vehicle with Hot-Wire Anemometry [Volume 8, Issue 2, 2018, Pages 193-204]
  • Ezoji, R. Aerodynamic analysis and modeling of effect of nose shape parameters on overturn of high speed train under crosswind [Volume 9, Issue 3, 2019, Pages 155-176]

F

  • Fadavi, A. Experimental Study on the Pressure Drop and Efficiency of an Aero-Cyclone with Guide Vanes on the Vortex Finder [Volume 11, Issue 3, 2021, Pages 181-193]
  • Faghih Khorasani, A.R. Study of transient pool boiling of deionized water in two modes of presence and absence of a magnetic field [Volume 10, Issue 1, 2020, Pages 209-221]
  • Fakhari, M. Health Condition Monitoring of railway wheels through vibration analysis using the moving RMS [Volume 11, Issue 4, 2021, Pages 85-92]
  • Fakhari, M.M Experimental investigation and numerical simulation of solid fuel rocket engine internal ballistic [Volume 7, Issue 4, 2018, Pages 13-24]
  • Falahati Naghibi, M. A New Approach to Identify the Ductile Damage Constants of Seamed Metallic Tube Using Hydro-Bulging Process [Volume 5, Issue 2, 2015, Pages 139-151]
  • Fallah, A. Blades Vibration Response Study of a Bladed Disk System Connecting with Two Lacing Wires and Mistuning Effect [Volume 8, Issue 4, 2019, Pages 97-109]
  • Fallah, A. Buckling analysis of functionally graded rectangular microplate in thermal environment based on exponential shear deformation theory using the modified couple stress theory [Volume 8, Issue 4, 2019, Pages 179-196]
  • Fallah, K. Force Convection Heat Transfer from a Stationary circular Cylinder in Non-Newtonian Fluids [Volume 5, Issue 4, 2016, Pages 229-242]
  • Fallahi, E. Mechanical behavior analysis of buried glass fiber reinforced epoxy composites used in pipelines and comparison with steel [Volume 12, Issue 1, 2022, Pages 35-50]
  • Fallahi, M. Dynamic Analysis and Control of Two Phase Flow Instability in Boilnig Channel [Volume 11, Issue 5, 2021, Pages 165-181]
  • Fallahi Arezoodar, A.R. Experimental investigation of vibrational mode shape influence on compression behaviour of Ti-6Al-4V alloy under superimposed ultrasonic vibration [Volume 12, Issue 4, 2022, Pages 55-68]
  • Fallahpour, N. Experimental investigation of Boundary Layer on an Oscillating (Pitching) Supercritical Airfoil in Compressible Flow Using Multiple Hot Film Sensors [Volume 5, Issue 3, 2015, Pages 173-184]
  • Fanaee, Sayyed A. Modeling and evaluation of the flow regime effects on fluid movement into three-dimensional channel with porous wall [Volume 10, Issue 3, 2020, Pages 265-280]
  • Farahani, Mohammadreza Evaluation of longitudinal residual stress variations along the thickness of welded joint of 5086 aluminum alloy [Volume 7, Issue 3, 2017, Pages 1-16]
  • Farahani, M. R. Evaluation of Ultrasonic Method Capability in Measurement of Longitudinal Welding Residual Stress through Thickness [Volume 8, Issue 3, 2018, Pages 29-47]
  • Farahani, S. Thermoeconomic optimization and investigation of condensation effect on Shell & Tube condenser in the presence of non-condensable gases with a new approach [Volume 12, Issue 1, 2022, Pages 159-173]
  • Farahat, H. Low-velocity impact response of A356/SiCp composite foam [Volume 7, Issue 2, 2017, Pages 129-147]
  • Farahat, S. Thermodynamic Simulation of Ejector-Expansion Refrigerator Cooler [Volume 5, Issue 2, 2015, Pages 181-189]
  • Farahat, S. Experimental and Numerical Investigation on the Parameters of Ventilated Super Cavitation around 30 degree Conical Cavitator [Volume 5, Issue 3, 2015, Pages 303-314]
  • Farahat, S. Experimental investigation of head resistance reduction by air bubbles in turbulent Couette-Taylor flow [Volume 7, Issue 1, 2017, Pages 147-160]
  • Farahmand, M. An analytical model Presentation and experimental investigation of the penetration ‎depth of the rigid blunt projectile on the perforated metal plate [Volume 10, Issue 4, 2021, Pages 241-251]
  • Farahmand Amin, J. Numerical Investigation of Installed Rod Effects in Front of an ASymmetric Blade section of Vertical Axis Wind Trubine [Volume 11, Issue 4, 2021, Pages 107-120]
  • Faraji, Hamed Extraction of force and critical time of three-dimensional manipulation of colon cancer tissue with different models of Persson friction [Volume 12, Issue 6, 2023, Pages 113-123]
  • Faraji, Hamed Experimental and theoretical investigation of Young's modulus of liver cancer tissue using rectangular, V-shaped and dagger cantilevers of an atomic force microscope [Volume 13, Issue 5, 2023, Pages 121-135]
  • Farajollahi, A.H. Size-dependent vibration of rotating rayleigh microbeams with variable cross-section in complex environments [Volume 11, Issue 6, 2022, Pages 159-171]
  • Farehyfar, N. Investigation of Stability of Noncircular Lobed Journal Bearings Lubricated by Ferrofluid [Volume 7, Issue 2, 2017, Pages 165-177]
  • Farhangdoost, Kh. Fatigue Life Prediction of Adhesive Joints Based on Initial Stiffness and Stiffness Degradation [Volume 6, Issue 3, 2016, Pages 175-183]
  • Farhang dost, Khalil The effect of impact loadingon crack propagation in forgedsteel EA4T [Volume 3, Issue 2, 2013, Pages 33-39]
  • Farhangmehr, V. A Characteristic-Based Finite-Volume Solution of Incompressible Flows with Heat Transfer [Volume 8, Issue 3, 2018, Pages 315-326]
  • Farhanieh, B. Airfoil Profile Reformation of Bladeless Fan and Investigation of Flow Increase Curve [Volume 5, Issue 2, 2015, Pages 169-179]
  • Farhanieh, B. Comparative Study of Carbone Monoxide and Temperature Vertical Distribution in Tunnel Fires [Volume 5, Issue 4, 2016, Pages 1-13]
  • Farhanieh, B. Numerical Study of Carbon Monoxide and Temperature Distribution in Tunnel Fires Employing Air Curtain [Volume 5, Issue 3, 2015, Pages 235-246]
  • Farhanieh, B. Investigation of the effect of several impressive parameters on fire extinguishing in a progressive coal tunnel [Volume 12, Issue 4, 2022, Pages 117-131]
  • Farhanieh, Bijan Investigating the Effect of Opening Aspect Ratio and Combustion Source Conditions on Behavior of Backdraft Phenomenon by Large Eddy Simulation [Volume 11, Issue 3, 2021, Pages 165-179]
  • Farid, M. Free vibration and static deflection of a micro-plate with piezoelectric layers using modified couple stress theory [Volume 7, Issue 4, 2018, Pages 25-34]
  • Farmani, M. Numerical Investigation of the Effect of Different Inflow Conditions on Turbulent Boundary Layer Flow Characteristics using Large-Eddy Simulation [Volume 9, Issue 2, 2019, Pages 261-274]
  • Farokhipour, A. Analysis of Surface Roughness Effects on the Performance of a Gas Turbine Stage [Volume 6, Issue 2, 2016, Pages 197-212]
  • Farrahi, Ali Experimental Evaluation of Fracture Toughness in Spiral Weld of Thermomechanical Steel Pipe [Volume 2, Issue 4, 2013, Pages 25-35]
  • Farrokhi, M. Fuzzy optimal treatment of AIDS-related non-Hodgkin’s cancer [Volume 9, Issue 2, 2019, Pages 211-225]
  • Farshad, Ali Experimental and numerical investigations of effects of section geometry and metallic foam filler on deformation and energy absorption characteristics of thin-walled tubes [Volume 4, Issue 1, 2014, Pages 51-63]
  • Farshidianfar, A. Experimental investigation on natural frequencies of thin rectangular plates using contact and non-contact methods [Volume 8, Issue 1, 2018, Pages 1-11]
  • Farshidianfar, A. Theoretically and Parametrically Investigation on Operation of Variable Diameter Impact Damper in Free Vibrations of a 1-DOF System [Volume 9, Issue 1, 2019, Pages 15-26]
  • Farshidianfar, Anooshiravan Finding the Optimal Distance and Cross Section for the Control Body to Decrease the Effects of Vibrations Caused by Vortexes in the Lock-in Area [Volume 3, Issue 1, 2013, Pages 81-94]
  • Fartashvand, V. Experimental investigation of vibrational mode shape influence on compression behaviour of Ti-6Al-4V alloy under superimposed ultrasonic vibration [Volume 12, Issue 4, 2022, Pages 55-68]
  • Farzad, M. A. Energy and Exergy Analysis and Optimization of a Cogeneration System Based on Solid Oxide Fuel Cell for Residential Applications [Volume 5, Issue 4, 2016, Pages 213-228]
  • Farzi, A. H. Analytical and experimental study of fatigue in 7075 aluminum nanocomposite reinforced with silicon carbide particles produced by vortex method [Volume 12, Issue 1, 2022, Pages 85-100]
  • Farzin, M. Experimental and Numerical Investigation of Die Filling and Thickness Variation at Two Step Box Copper Tube Hydroforming Die with Movable Bushes [Volume 6, Issue 2, 2016, Pages 87-96]
  • Fasahat, Mahmoud Investigation on the effect of laser cladding parameters of Inconel 713 LC by Metco 81VF powder on the microstructure characteristics and micro hardness of coating [Volume 12, Issue 5, 2022, Pages 93-108]
  • Fasihfar, A. Investigation of geometric effective parameters in design of 1.5kW hydraulic dynamometer [Volume 5, Issue 4, 2016, Pages 151-162]
  • Fateh, M. M. Adaptive Fuzzy Control of a Mobile Manipulator Robot [Volume 5, Issue 2, 2015, Pages 17-27]
  • Fateh, M. M. Robust Impedance Control of a Lower-Limb Rehabilitation Robot Using Fuzzy Parameters [Volume 5, Issue 4, 2016, Pages 83-95]
  • Fateh, Mohammad Mehdi Optimal Discrete-Time Control of Robot Manipulators in Repetitive Tasks [Volume 2, Issue 3, 2012, Pages 35-44]
  • Fateh, Mohammad Mehdi Adaptive sliding mode control for a mobile robot [Volume 3, Issue 2, 2013, Pages 11-21]
  • Fateh, Mohammad Mehdi Sliding Mode Fuzzy Control for Flexible-Joint Robot Manipulators [Volume 3, Issue 4, 2014, Pages 23-32]
  • Fateh, Mohammad Mehdi Design and Implement of Fuzzy control of a Robotic Camera for Target Tracking [Volume 4, Issue 1, 2014, Pages 1-10]
  • Fateh, Mohammad Mehdi Robust control of robotic manipulators using an adaptive neural network estimator of uncertainty [Volume 4, Issue 2, 2014, Pages 1-12]
  • Fateh, Mohammad Mehdi Impedance adaptive control of an active suspension system [Volume 4, Issue 3, 2014, Pages 11-21]
  • Fateh, Mohammad Mehdi Model-Free Control for a Vehicle Hydraulic Suspension System [Volume 4, Issue 4, 2015, Pages 13-21]
  • Fateh, Mohammad Mehdi Adaptive Fuzzy Control of an Electrical Single-Wheel Robot [Volume 5, Issue 1, 2015, Pages 61-75]
  • Fateh, Mohammad Mehdi Adaptive fuzzy sliding mode control of a robotic manipulator in task-space using voltage control strategy [Volume 5, Issue 3, 2015, Pages 17-26]
  • Fatehi, A. Volume fraction measurement in gas-liquid two phase flow using gamma radiation scattering [Volume 7, Issue 2, 2017, Pages 179-187]
  • Fatehi Narab, H. An Experimental Investigation of Power Scavenging from Human Walking [Volume 7, Issue 4, 2018, Pages 173-181]
  • Fateh Nobandegani, Habibollah The Modeling of Cement Rotary Kiln Based on Spang Model for Investigation of CO2 Emission in Cement Production Process [Volume 5, Issue 2, 2015, Pages 205-216]
  • Fatemi, S. A. Investigation of springback behavior of fibre-metal laminates using equivalent-layer and separate-layer theories [Volume 6, Issue 4, 2016, Pages 1-9]
  • Fatemi, S. A. Experimental investigation of fabricated parts by laser melting of iron powder to achive turning point between sintering process and complete melting [Volume 7, Issue 4, 2018, Pages 61-72]
  • Fathali, M. Investigation on the tank vehicle dynamic performance influenced by fluid sloshing using multidisciplinary simulation technique [Volume 8, Issue 1, 2018, Pages 183-202]
  • Fathi, Alireza Identification of a Generalized Prandtl-Ishlinskii Model for a Micro Positioning System Actuated by Shape Memory Alloys Actuator [Volume 13, Issue 2, 2023, Pages 15-25]
  • Fathi, E. Experimental, numerical and analytical study of energy absorbtion in drop weight tear test specimen with chevron notch on API X65 steel [Volume 10, Issue 2, 2020, Pages 95-110]
  • Fathian, M. Effect of using phase change materials in protective clothing on human thermal comfort under extreme cold conditions [Volume 7, Issue 4, 2018, Pages 239-249]
  • Fathi-Asgarabad, E. Experimental study of low velocity impact effect on fracture energy of API X65 steel using drop weight tear test [Volume 11, Issue 2, 2021, Pages 57-71]
  • Fatouraee, N. The alternating magnetic field and convection heat transfer implications for magnetic fluid hyperthermia- A numerical analysis [Volume 6, Issue 1, 2016, Pages 189-200]
  • Fattahi, Gh. Development of MAFVRO to Randomly Excited Vibration Systems to Derive the Natural Frequencies and Mode Shapes [Volume 5, Issue 2, 2015, Pages 71-81]
  • Fayez, M. S. Free Vibration Analysis of Carbon Nanotube Grid Composite Cylindrical Shell with First-Order Shear Deformation Theory [Volume 10, Issue 4, 2021, Pages 77-96]
  • Fazel, R. Determination of Stability Regions of Wheel and Workpiece in Plunge Grinding Process Using a 3-D Workpiece Model [Volume 7, Issue 3, 2017, Pages 67-82]
  • Fazeli, H. Vibration analysis of multi-directional functionally graded nanoplates with initial geometric imperfection using quasi-3d theory based on an isogeometric approach [Volume 11, Issue 6, 2022, Pages 111-126]
  • Feghhi, S.A.H. Volume fraction measurement in gas-liquid two phase flow using gamma radiation scattering [Volume 7, Issue 2, 2017, Pages 179-187]
  • Feryduni, J. Analysis of a High-Speed Underwater Supercavitating Projectile Dynamics, Based on an Experiment [Volume 9, Issue 1, 2019, Pages 279-291]
  • Fesharakifard, R. Finite Element Analysis of Heat Distribution in Weld Parts by Adaptive Mesh Method [Volume 7, Issue 1, 2017, Pages 135-145]
  • Firoozabadi, Bahar Experimental Investigation on Rising of a Sequence of Drops in a Viscous Fluid [Volume 1, Issue 1, 2011, Pages 39-46]
  • Firouzi, Vahid Modeling and simulation of the interaction forces between the gait rehabilitation system with a musculoskeletal-model of human body [Volume 12, Issue 6, 2023, Pages 1-12]
  • Foadaddini, A. Enhancing the performance of checkerboard Thomas method by using shared memory for solving the heat transfer problems on GPU [Volume 8, Issue 3, 2018, Pages 303-314]
  • Fooladpanjeh, S. An Experimental Study and Statistical Modelling on Compressive Properties of Epoxy/ Graphene/ Hydroxyapatite Nanocomposites [Volume 8, Issue 1, 2018, Pages 59-70]
  • Foorginejad, A. Investigation of rubber formulation by measuring ultrasonic propagation velocity [Volume 6, Issue 2, 2016, Pages 285-294]
  • Forghani, M.A. Frequency Analysis of Bi-directional Porous Functionally Graded Beams with Variable cross section on Elastic Foundation using Reddy Third Order Shear Deformation Theory [Volume 11, Issue 3, 2021, Pages 97-118]
  • Forooghi, A. Investigation of dynamics and stability behavior of axially moving micro-beams with functionally graded property in the longitudinal direction [Volume 10, Issue 2, 2020, Pages 79-94]
  • Forooghi, A. Vibrational behavior of viscoelastic AFG rotating micro-beam with longitudinal motion under axial load in magnetic field based on the modified couple stress theory [Volume 10, Issue 3, 2020, Pages 159-180]
  • Forooghi, A. Parametric dynamical investigation of axially graded spinning tubes conveying fluid by considering scale effects [Volume 10, Issue 4, 2021, Pages 145-163]
  • Foroozande, S. Vibration Analysis of Multiple Parallel Timoshenko Beams with Intermediate Flexible Connections subjected to a Moving Mass [Volume 6, Issue 2, 2016, Pages 69-86]
  • Foroozesh, Farzaneh Experimental investigation on drag coefficient reduction due to tripping wire on a cylinder [Volume 2, Issue 2, 2012, Pages 81-90]
  • Foroozmehr, E. Numerical Simulation and Visualization of Gas-Metal Powder Flow in Laser Cladding Process [Volume 11, Issue 5, 2021, Pages 183-197]
  • Forouzani, H. Elasto-plastic time dependent impact analysis of high speed projectile on water surface [Volume 6, Issue 3, 2016, Pages 281-298]
  • Forouzani, H. Numerical simulation and experimental investigation of an underwater high-speed moving body [Volume 7, Issue 1, 2017, Pages 217-230]
  • Forouzesh, A. Simulation of Focusing Phased Array Ultrasonic in Dissimilar Metal Welds for Detecting the Defects [Volume 9, Issue 2, 2019, Pages 77-92]
  • Foshat, S. Experimental investigation on the effect of preprocessing in fabrication of superhydrphobic surfaces on laminar drag reduction [Volume 8, Issue 4, 2019, Pages 239-248]
  • Fouladi, N. Experimental and Numerical Investigation of the Effect of Geometric Parameters on Flexible joint Nonlinear Behavior for Solid rocket motor Trust Vector Control [Volume 7, Issue 4, 2018, Pages 197-207]

G

  • Gandjalikhan Nassab, Seyyed A. Performance optimization of organic Rankin cycle (ORC) based on comparative study of Box –Behnken and central Composite design methods [Volume 11, Issue 2, 2021, Pages 219-232]
  • Gandomkar, M. Extraction of hydrodynamic coefficients applying planning mechanism motion maneuver using computational fluid dynamics [Volume 8, Issue 1, 2018, Pages 215-228]
  • Ganjali, A. Analysis and Shape Optimization of Axsymmetric Structures by Isogeometric Analysis Method [Volume 1, Issue 1, 2011, Pages 1-13]
  • Ganjali, Ahmad Stress Recovery and Error Estimation by Using Forces Induced on Patches of‎ Isogeometric Analysis [Volume 2, Issue 2, 2012, Pages 13-29]
  • Ganjali, Ahmad Adaptivity in isogeometric analysis of structures using error estimation methods based on stress recovery [Volume 5, Issue 3, 2015, Pages 79-91]
  • Ganjali, Ahmad Investigating the efficiency of error estimation based on strees recovery in the adaptive solution of functionally graded materials by isogeometric method [Volume 12, Issue 6, 2023, Pages 83-98]
  • Ganjali, Ahmad Error estimation based on stress recovery by adaptivity in nonlinear problems of elasto-plasticity behavior by isogeometric method [Volume 13, Issue 3, 2023, Pages 67-84]
  • Garousi Farshi, L. Thermodynamic analysis of using compressor in absorption heat transformers with ammonia-lithium nitrate and ammonia sodium thiocyanate as working fluids [Volume 11, Issue 3, 2021, Pages 221-234]
  • Garshasbi, M. Reduced pressure drop in the air inlet of a cruise missile using adjoint optimization [Volume 10, Issue 2, 2020, Pages 205-217]
  • Gavagsaz Ghoachani, R. Enhancing the performance of Bi-stable Energy Harvester using Chaos control [Volume 11, Issue 2, 2021, Pages 1-14]
  • Gerami, Mohsen Investigation of the fundamental period for the moment resistant frame [Volume 2, Issue 2, 2012, Pages 1-11]
  • Gerdooei, M. A New Approach to Identify the Ductile Damage Constants of Seamed Metallic Tube Using Hydro-Bulging Process [Volume 5, Issue 2, 2015, Pages 139-151]
  • Gerdooei, M. Experimental Analysis of the Strain Effect on the Anisotropic Coefficients of 6061 Aluminum Sheet Using Digital Image Processing [Volume 6, Issue 1, 2016, Pages 73-84]
  • Gerdooei, M. Theoretical and Numerical Analysis of Hot Deep Drawing of Hemispherical Thick Head [Volume 10, Issue 2, 2020, Pages 59-78]
  • Gerdooei, M. Analytical and experimental investigation on stretch forming of an anisotropic DC04 steel sheet [Volume 12, Issue 4, 2022, Pages 69-79]
  • Ghadak, F. Numerical simulation of radiance effects on the aerodynamic heating of ablative nose with VSL-VBLS method [Volume 7, Issue 1, 2017, Pages 175-186]
  • Ghadamyari, E. Use of short-time Fourier transform in vibration analysis of helicopter main rotor [Volume 4, Issue 4, 2015, Pages 101-112]
  • Ghaderi, A. A. Analytical Study on Longitudinal Vibration of Viscoelastic Cracked Rod under Magnetic Field. [Volume 10, Issue 4, 2021, Pages 275-286]
  • Ghaderi, M.R. A numerical feasibility study on using piezoelectric pumps as dosing pumps by implementing fluid-structure interaction [Volume 12, Issue 1, 2022, Pages 175-189]
  • Ghaderi, Seyed Hadi Mechanical properties of carbon nanotubes form a generalized modified molecular structural mechanics model [Volume 4, Issue 4, 2015, Pages 75-85]
  • Ghadery, Sh. Design and simulation of a two-axis thermal MEMS accelerometer with optimized sensitivity [Volume 8, Issue 2, 2018, Pages 13-24]
  • Ghadiri, Sajjad A review on the structures and characteristics of micro-turbojet engines [Volume 13, Issue 5, 2023, Pages 59-76]
  • Ghadirian, H. Vibration and stability analysis of laminated composite plates with hygrothermal effect [Volume 6, Issue 2, 2016, Pages 155-166]
  • Ghadirian, H. The study of the effects of thermal environment on Free Vibration analysis of two-dimensional Functionally Graded Rectangular plates on Pasternak elastic foundation [Volume 6, Issue 3, 2016, Pages 137-147]
  • Ghaedali, H. Investigation of sequence effect on welding residual stresses and distortion in a aluminum shell opening [Volume 8, Issue 3, 2018, Pages 1-14]
  • Ghaedi, Saeed Influence of active magnetic bearing stiffness on Chaotic vibration of flexible rotor [Volume 6, Issue 2, 2016, Pages 1-16]
  • Ghaemi, Narjes Investigating the effects of cross section asymmetry on the vibration behavior of the nonlinear nanoresonator under internal resonance conditions [Volume 13, Issue 4, 2023, Pages 53-66]
  • Ghafarirad, H. Mass Detection by Theoretical and Experimental Frequency Response Analysis of Bending Piezoelectric Actuators [Volume 9, Issue 4, 2019, Pages 27-39]
  • Ghafarirad, Hamed Theoretical and Experimental Behavior Analysis of Continuous Soft Robots Consisting of Fiber-Reinforced Actuators [Volume 12, Issue 5, 2022, Pages 161-173]
  • Ghaffari, A Changing the dynamics of a system by using finite duration inputs: Application to cancer modeling and treatment [Volume 4, Issue 1, 2014, Pages 79-91]
  • Ghaffari, V. Simulation and performance investigation of a typical guidance system with suitable modeling of the guidance system elements and its sensitivity with respect to aerodynamic coefficients [Volume 8, Issue 2, 2018, Pages 235-249]
  • Ghaffari, V. Design and Tuning of Robust Proportional-Derivative Sliding-Mode Control (PD-SMC) in Stabilization of 2-DOF Robot Manipulator [Volume 9, Issue 4, 2019, Pages 137-150]
  • Ghaffari Torab Torki, R. Numerical and Experimental Study on Guillotine Shearing of a Complex Profile Produced by Roll Forming process [Volume 10, Issue 3, 2020, Pages 1-15]
  • Ghaforian Nosrati, H. A New Approach to Identify the Ductile Damage Constants of Seamed Metallic Tube Using Hydro-Bulging Process [Volume 5, Issue 2, 2015, Pages 139-151]
  • Ghafurian, M. M. Performance evaluation of Ferric oxide (Fe3O4) and Graphene nanoplatelet (GNP) nanoparticles in solar steam generation [Volume 9, Issue 2, 2019, Pages 181-196]
  • Ghafurian, M. M. Optimization of the CHP System, Investigation of its Pollution and Economic Costs in Ideal and Real Conditions in terms of Local and Global Approach [Volume 10, Issue 1, 2020, Pages 161-176]
  • Ghafurian, M. M. Reduce the hot-spot temperature of an oil transformer using a heat pipe [Volume 13, Issue 1, 2023, Pages 87-97]
  • Ghajar, R. Experimental investigation of repeated low velocity impact on GLARE with various energy levels [Volume 5, Issue 2, 2015, Pages 43-56]
  • Ghajar, R. Coupling of Dafalias-Popov’s Two-Surface Plasticity with Notch Stress-Strain Estimation Methods in Plane Stress Problems under Monotonic Uniaxial Loading [Volume 11, Issue 2, 2021, Pages 15-24]
  • Ghajar, Rahmatollah Nonlinear numerical elasticity analysis of eccentric low-velocity impact of rectangular sandwich plate with composite face sheets subjected to biaxial preloads [Volume 5, Issue 1, 2015, Pages 87-99]
  • Ghamami, M. optimization of locomotive structure by using of natural frequency and maximum stress constraints [Volume 8, Issue 1, 2018, Pages 23-33]
  • Ghamari, V. Thermoeconomic evaluation of drinking water production by using different prime mover on combined production of cooling, heating, power, and freshwater [Volume 11, Issue 1, 2021, Pages 365-379]
  • Ghamarian, A. Experimental and Numerical Investigation of Crushing of Brass Cylindrical Tubes [Volume 6, Issue 2, 2016, Pages 181-196]
  • Ghamarian, A. Investigation of Axial and Oblique Crushing of Empty and Foam-Filled Conical Tubes under Clamped Boundary Condition [Volume 6, Issue 4, 2016, Pages 139-159]
  • Ghamarizadeh, M. Dynamic response of sandwich circular blast shield with tubular cores under free blast load [Volume 11, Issue 4, 2021, Pages 71-83]
  • Ghamarizadeh, Mojtaba Presenting an analytical model based on the energy method to study the plastic deformation of circular plates under uniformly repeated blast loading [Volume 12, Issue 3, 2022, Pages 33-43]
  • Ghanbari, F. Numerical investigation of heat transfer rate around isothermal elliptical cylinder under pulsating flow [Volume 8, Issue 2, 2018, Pages 161-176]
  • Ghanbari Oranj, B. Optimization of Radiation Shields Parameters in Multi-Layer Thermal Insulations [Volume 8, Issue 1, 2018, Pages 71-81]
  • Ghannad Kahtoei, Mehdi Displacements and Stresses in Rotating FGM Pressurized Thick Hollow cylindrical Shells Based on HSDT [Volume 4, Issue 1, 2014, Pages 65-78]
  • Gharooni, Hamed Displacements and Stresses in Rotating FGM Pressurized Thick Hollow cylindrical Shells Based on HSDT [Volume 4, Issue 1, 2014, Pages 65-78]
  • Ghasemi, A. Optimization of Heating Element Profile of Ljungstrom Using Discrete Orthogonal Functions and Adjoint Method [Volume 11, Issue 4, 2021, Pages 149-163]
  • Ghasemi, B. Investigation on the tank vehicle dynamic performance influenced by fluid sloshing using multidisciplinary simulation technique [Volume 8, Issue 1, 2018, Pages 183-202]
  • Ghasemi, E. Experimental investigation and optimal analysis of the high-velocity forming process of bilayer plates [Volume 9, Issue 3, 2019, Pages 65-80]
  • Ghasemi, K. Experimental investigation and estimation of thermal conductivity and contact conductance of granular activated carbon packed bed as a function of density [Volume 10, Issue 2, 2020, Pages 193-204]
  • Ghasemi, M. Buckling analysis of functionally graded rectangular microplate in thermal environment based on exponential shear deformation theory using the modified couple stress theory [Volume 8, Issue 4, 2019, Pages 179-196]
  • Ghasemi, M.R. Layered finite element analysis of laminated composite plates by using unsymmetric membrane element and non-conforming bending element [Volume 10, Issue 2, 2020, Pages 141-152]
  • Ghasemi, R. Statistical modelling, optimization and Sobol sensitivity analysis of effective parameters on thrust force behavior in micro-drilling of glass/epoxy laminated composites [Volume 10, Issue 4, 2021, Pages 225-240]
  • Ghasemloo, S. Presenting the calculation process of pitch and roll damping coefficients for a projectile in various flight conditions with numerical method [Volume 7, Issue 4, 2018, Pages 183-196]
  • Ghasempour, M. Experimental and Numerical Investigation of Die Filling and Thickness Distribution for Producing Bended Tubes with Non-Uniform Bending Radius and Diameter in Hydroforming Die with Moveable Bushes [Volume 7, Issue 1, 2017, Pages 11-21]
  • Ghayour, M. Free and Force Vibration Analysis of Cracked Euler-Bernoulli Beam with Spectral Finite Element Method [Volume 5, Issue 2, 2015, Pages 57-70]
  • Ghayour, M. Influence of active magnetic bearing stiffness on Chaotic vibration of flexible rotor [Volume 6, Issue 2, 2016, Pages 1-16]
  • Ghayour, M. Dynamic analysis of prestressed Timoshenko beam by using wavelet-based spectral finite element method [Volume 6, Issue 4, 2016, Pages 11-22]
  • Ghazanfari Holagh, Sh. Analytical and numerical solution for steady-state differential conduction equation in a right triangular plate with constant-temperature boundary condition [Volume 5, Issue 3, 2015, Pages 289-302]
  • Ghazavi, M. R. Vibration and stability analysis of laminated composite plates with hygrothermal effect [Volume 6, Issue 2, 2016, Pages 155-166]
  • Ghazi, M. Modeling and analysis of total site cogeneration of heat and power from an exergoeconomic approach in a 100MW case study [Volume 11, Issue 5, 2021, Pages 247-258]
  • Ghazikhani, M. Experimental Investigation on Low Swirl Premixed Combustion and Effects of Geometrical Parameters on Its Performance [Volume 5, Issue 2, 2015, Pages 191-204]
  • Ghaznavi, A. Finite element modeling of debonding behavior of the adhesively bonded joints between sandwich panel and pultruded profile in flexural loading [Volume 6, Issue 1, 2016, Pages 107-116]
  • Ghaznavi, A. Stress and displacement analysis of thick sandwich plates with deformable auxetic cores using an enhanced third order global-local theory [Volume 9, Issue 2, 2019, Pages 109-122]
  • Gheibi, A. Application of Finite-Difference Based Lattice Boltzmann Method for Numerical Simulation of Nanofluid Turbulent Convection in channel [Volume 11, Issue 1, 2021, Pages 325-350]
  • Gheitagh, A. M. Thermal Performance Modeling of Liquid in Evaporator with Spherical Microstructures and Conical Micropillars [Volume 6, Issue 4, 2016, Pages 193-204]
  • Gheitaghy, A. M. Modeling of Microfluidic Capillary Pressure in Microstructures by Surface Evolver Software [Volume 5, Issue 3, 2015, Pages 247-255]
  • Ghiasi, M. Reliability Analysis and Evaluating of Rotary Drilling Machine – Case Study: Mine No.1 of Golgohar Iron Ore Mine [Volume 6, Issue 3, 2016, Pages 185-194]
  • Ghiasvand, A. Numerical simulation of FSW and FSSW with pinless tool of AA6061-T6 Al alloy by CEL approach [Volume 8, Issue 3, 2018, Pages 65-75]
  • Ghobadi, M. Aerothermal Analysis of Rotation and Rotational Buoyancy Effect on Internal Cooling of Gas Turbine Blade- An Experimental study [Volume 8, Issue 3, 2018, Pages 277-288]
  • Ghodsi, S.R. 2D and 3D Numerical Investigation of the Super Cavitation Phenomena in the case of Injection and No Injection of the Air and Water vapour on the Under Water Vehicle [Volume 8, Issue 1, 2018, Pages 229-240]
  • Ghohani Arab, H. Layered finite element analysis of laminated composite plates by using unsymmetric membrane element and non-conforming bending element [Volume 10, Issue 2, 2020, Pages 141-152]
  • Gholami, O. Modeling and Control of a 3PRS Robot Using Lagrange Method [Volume 9, Issue 3, 2019, Pages 25-38]
  • Gholami, R. Statistical modelling, optimization and Sobol sensitivity analysis of effective parameters on thrust force behavior in micro-drilling of glass/epoxy laminated composites [Volume 10, Issue 4, 2021, Pages 225-240]
  • Gholamian, E. Numerical Analysis of Various Nanoparticles Size Effects on Thermal Performance of Nanofluid in A Microchannel Heat Sink [Volume 6, Issue 4, 2016, Pages 275-284]
  • Gholamzade, A. sensitivity analysis of Operational Modal Approaches in damping identification and implementation on an industrial sample [Volume 8, Issue 3, 2018, Pages 177-192]
  • Gholiepour Asrami, Ehsan Experimental Investigation of Air Flow Velocity Profiles Effects on the Wires and Cables of Power Transmission Lines and Supporting Devices [Volume 2, Issue 1, 2012, Pages 83-97]
  • Gholinia, S. Drone Propeller Analysis by Blade Element Momentum and Numerical Methodes for Autonmus Submarine Veichle [Volume 11, Issue 5, 2021, Pages 225-245]
  • Gholizade, K. Damped vibration of tapered and bidirectional graded plate subjected to arbitrary radial load rested on elastic medium [Volume 11, Issue 5, 2021, Pages 107-118]
  • Ghorashi, Hassan Robust and Adaptive Controller for Wind Turbine Blade Testing Machine [Volume 5, Issue 3, 2015, Pages 27-38]
  • Ghorbani, S. Thermodynamic analysis and Pareto optimization of hybrid system consisting of biomass gasification, solid oxide fuel cell and gas turbine [Volume 7, Issue 1, 2017, Pages 113-133]
  • Ghorbanianfard, P. Experimental and numerical investigation of blade shape effect on the Hunter wind turbines efficiency [Volume 6, Issue 2, 2016, Pages 329-339]
  • Ghorbani Menghari, H. Experimental and Numerical Investigation of Die Filling and Thickness Variation at Two Step Box Copper Tube Hydroforming Die with Movable Bushes [Volume 6, Issue 2, 2016, Pages 87-96]
  • Ghorbani Menghari, H. Experimental and Numerical Investigation of Die Filling and Thickness Distribution for Producing Bended Tubes with Non-Uniform Bending Radius and Diameter in Hydroforming Die with Moveable Bushes [Volume 7, Issue 1, 2017, Pages 11-21]
  • Ghorbanpour Arani, A. Free vibration of the cylindrical panel made of functionally graded materials resting on pasternak elastic foundation subjected to magnetic fields using first order shear deformation theory [Volume 5, Issue 1, 2015, Pages 149-163]
  • Ghorbanpour Arani, Ali Buckling of an embedded piezoelectric nanobeam based on strain gradient and Reddy beam theories [Volume 4, Issue 3, 2014, Pages 23-33]
  • Ghoreishi, H. R. Investigation of geometric effective parameters in design of 1.5kW hydraulic dynamometer [Volume 5, Issue 4, 2016, Pages 151-162]
  • Ghoreishi, M. Numerical Investigation and Enhancement of Flushing Performance in the Micro-Electro Discharge Machining by Considering the Hole Depth and Dielectric Fluid [Volume 11, Issue 1, 2021, Pages 111-122]
  • Goharimanesh, M. Vehicle dynamics improvement using developed robust controller [Volume 6, Issue 4, 2016, Pages 77-90]
  • Goharshadi, M. Using JST and CUSP schemes in aerodynamic optimization based on discrete adjoint method in a viscous all-speed solver developed on unstructured grid [Volume 11, Issue 3, 2021, Pages 1-14]
  • Golabi, S. Optimization of Bearing Location for Multi-Stepped Rotor by Genetic Algorithm [Volume 6, Issue 1, 2016, Pages 99-106]
  • Golami, M. A new model for two-phase flow in a solar still improved by a porous layer [Volume 8, Issue 1, 2018, Pages 171-182]
  • Golmakani, Hadi Numerical and Experimental Analysis of Bowing Defect in the Flexible Roll Forming Process of Copper-Aluminum Double Layer Sheets [Volume 13, Issue 6, 2024, Pages 75-87]
  • Golmakani, M.E Bending of functionally graded carbon nanotube reinforced composite plates using dynamic relaxation method [Volume 5, Issue 1, 2015, Pages 115-133]
  • Golparvar, H. Aeroelastic nonlinear analysis of a high aspect ratio wing with store flow steady incompressible [Volume 6, Issue 2, 2016, Pages 259-269]
  • Golparvar, H. Experimental and Numerical Investigation of Water Impact on Hull of Seaplane UAV [Volume 11, Issue 1, 2021, Pages 227-238]
  • Goodarzi, A. Investigation on the effect of using phase change materials in the wall of solar chimney on natural ventilation of a room [Volume 5, Issue 3, 2015, Pages 257-269]
  • Goodarzi, M. R. Numerical simulation of ultra high performance fibre reinforced concrete panels subjected to underwater blast loading [Volume 7, Issue 3, 2017, Pages 149-163]
  • Goodarzian, F. Dynamic analysis of composite plates with delaminations under hygrothermal loads using finite strip method [Volume 7, Issue 1, 2017, Pages 187-203]
  • Gorji, A. Experimental and numerical investigation of the sheet forming in hydroforming process [Volume 5, Issue 4, 2016, Pages 27-33]
  • Gorji, A. Optimization of the Initial Blank Shape in hydroforming Double-Stepped Parts [Volume 5, Issue 3, 2015, Pages 137-149]
  • Gorji, A. Experimental and Numerical Investigation of Die Filling and Thickness Variation at Two Step Box Copper Tube Hydroforming Die with Movable Bushes [Volume 6, Issue 2, 2016, Pages 87-96]
  • Gorji, A. Experimental and Numerical Investigation of Die Filling and Thickness Distribution for Producing Bended Tubes with Non-Uniform Bending Radius and Diameter in Hydroforming Die with Moveable Bushes [Volume 7, Issue 1, 2017, Pages 11-21]
  • Gorji, H. Study of the Effect of Calibration Procedure on the Accuracy of the Phenomenological Ductile Fracture Criteria in Sheet Metal Forming [Volume 10, Issue 1, 2020, Pages 1-16]
  • Gorji, M. Experimental investigation of the effect of parallel-flow primary nozzle on the performance of the ejector [Volume 11, Issue 3, 2021, Pages 235-244]

H

  • Habibi, M.R. Stability Analysis of Natural Convection with Variable Physical Coefficients Using Linear Stability Theory [Volume 8, Issue 1, 2018, Pages 157-169]
  • Habibi, N. Numerical Investigation of the Effect of Corona Discharge on the Heat Transfer and Pressure Drop over a Single Slot [Volume 6, Issue 4, 2016, Pages 205-221]
  • Habibi, Seyedehsan Heat transfer enhancement in a microchannel using active vibrating piezoelectric vortex generator [Volume 12, Issue 6, 2023, Pages 191-204]
  • Hadavand, A. Experimental investigation of fabricated parts by laser melting of iron powder to achive turning point between sintering process and complete melting [Volume 7, Issue 4, 2018, Pages 61-72]
  • Hadavi, M.R. Modeling and Prediction of Fuel Consumption and Emissions of Direct Injection Diesel Engines using Artificial Neural Network by Applying Control Parameters of Engine Speed, Fuel Mass and Inlet Air Temperature [Volume 10, Issue 2, 2020, Pages 237-251]
  • Haddadi, A. Investigation of rubber formulation by measuring ultrasonic propagation velocity [Volume 6, Issue 2, 2016, Pages 285-294]
  • Hadian Jazi, Sh. Smart Fault Diagnosis of Rotating Machine Using Fuzzy Systems and Analysis the Effect of Different Membership Functions [Volume 6, Issue 1, 2016, Pages 85-98]
  • Hadian Jazi, Sh. Exploring the Effect of Foot Position on Performance of a Modular and Hierarchical Movement Planner in Planning the Sit-to-Stand Transfer [Volume 6, Issue 3, 2016, Pages 109-118]
  • Hadian Jazi, Shahram Use of short-time Fourier transform in vibration analysis of helicopter main rotor [Volume 4, Issue 4, 2015, Pages 101-112]
  • Hadidi- Moud, Saeed The effect of impact loadingon crack propagation in forgedsteel EA4T [Volume 3, Issue 2, 2013, Pages 33-39]
  • Hadinejad Roudi, A. A. Finite Element Analysis of Heat Distribution in Weld Parts by Adaptive Mesh Method [Volume 7, Issue 1, 2017, Pages 135-145]
  • Hadipour Goudarzi, R. Drone Propeller Analysis by Blade Element Momentum and Numerical Methodes for Autonmus Submarine Veichle [Volume 11, Issue 5, 2021, Pages 225-245]
  • Hadipour Goudarzi, R. The Calculation of Trimaran Vessel Resistance and Uncertainty estimation in Calm water condition by Experimental and Numerical methods [Volume 11, Issue 6, 2022, Pages 253-271]
  • Haghgoo, M. Using GMDH-type neural network model to predict the response of triangular plates under the hydrodynamic loading [Volume 10, Issue 3, 2020, Pages 233-243]
  • Haghgoo, Mojtaba Experimental investigation into the energy absorption of sandwich structures with the core made of waste rubber particles under impact loading [Volume 12, Issue 6, 2023, Pages 13-23]
  • Haghighat, H. Mechanical behavior analysis of buried glass fiber reinforced epoxy composites used in pipelines and comparison with steel [Volume 12, Issue 1, 2022, Pages 35-50]
  • Haghighat Namini, Vahab Development of the Conceptual Design Algorithm for Tactical Aerostat [Volume 13, Issue 2, 2023, Pages 103-120]
  • Haghighi, A. Investigation on the effect of using phase change materials in the wall of solar chimney on natural ventilation of a room [Volume 5, Issue 3, 2015, Pages 257-269]
  • Haghighi, Behrad Numerical analysis of fluid flow and combined natural and force convection heat transfer for nanofluid in concentric /eccentric rotating cylinders [Volume 13, Issue 5, 2023, Pages 77-89]
  • Haghighi Khoshkhoo, R. Optimization of Shazand Arak power plant boiler rifled tubes using genetic algorithm [Volume 6, Issue 3, 2016, Pages 227-237]
  • Haghighi Khoshkhoo, Ramin Numerical study of solid-gas two phase flow in air-side of a compact heat exchanger using Lagrangian approach [Volume 8, Issue 2, 2018, Pages 143-159]
  • Haghighi Poshtiri, Amin Two-dimensional simulation of laminar flow around four two-degree-of-freedom cylindrical cylinders in a rectangular arrangement using random vortex-boundary element method [Volume 13, Issue 6, 2024, Pages 169-184]
  • Haghiri, A. Investigation of spike length on wave drag reduction of standard model in hypersonic flow [Volume 10, Issue 1, 2020, Pages 177-192]
  • Haghiri, A. A. Experimental investigation of Boundary Layer on an Oscillating (Pitching) Supercritical Airfoil in Compressible Flow Using Multiple Hot Film Sensors [Volume 5, Issue 3, 2015, Pages 173-184]
  • Haghjoo, Mohammadreza Modeling and simulation of the interaction forces between the gait rehabilitation system with a musculoskeletal-model of human body [Volume 12, Issue 6, 2023, Pages 1-12]
  • Haghnegahdar, A. Effect of SiO2/Al to increase microcantilever infrared detectors sensitivity and compare with Si3N4/Au [Volume 5, Issue 3, 2015, Pages 151-163]
  • Hahsemi, Sayyed H. Experimental study of mechanical behavior of welded API X70 pipe steel using tensile and three point bend specimens [Volume 9, Issue 4, 2019, Pages 93-106]
  • Hajabdollahi, H. Thermoeconomic evaluation of drinking water production by using different prime mover on combined production of cooling, heating, power, and freshwater [Volume 11, Issue 1, 2021, Pages 365-379]
  • Haji Aboutalebi, F. Shape Optimization of Preform Dies in two-stage Near Net Forging [Volume 4, Issue 4, 2015, Pages 65-73]
  • Haji Aboutalebi, F. Experimental and Numerical Study of Projectile Impact to Sheet Metal, using Hooputra's Ductile Damage Criterion [Volume 5, Issue 1, 2015, Pages 49-59]
  • Haji Agha Mohammad Zarbaf, Seyed E. Solving the inverse problem of identification of FE model parameters of a non-uniform beam using genetic algorithms [Volume 5, Issue 1, 2015, Pages 39-48]
  • Hajialyani, O. Analysis of fluid-structure interaction in a pipeline with symmetric and asymmetric branching conveying turbulent flow: A case study [Volume 11, Issue 2, 2021, Pages 119-131]
  • Hajidavalloo, E. Development of an applied relationship for pressure drop estimation in tri-cone drill bit using Bingham rheological model [Volume 11, Issue 6, 2022, Pages 45-57]
  • Hajidavalloo, Ebrahim Simulation Of Ramin Power Plant Cooling Towers operation and Consider Packing substitute in their Efficiency [(Articles in Press)]
  • Haji Esmaeili, M. H. Comparing bending fatigue and fretting fatigue properties in aluminum-silicon alloy under working conditions of engine piston-ring system [Volume 11, Issue 2, 2021, Pages 157-174]
  • Hajilary, N. CFD Simulation of Anode Solid Oxide Fuel Cell [Volume 9, Issue 1, 2019, Pages 217-235]
  • Hajjary, M. Computational Fluid Dynamics Simulation of Ljungstrom Rotary Preheater in Steam Power Plant for Leakage Assessment Using Porous Media Approach [Volume 11, Issue 4, 2021, Pages 179-190]
  • Hakamifard, M. Numerical and Analytical Calculation of Munk Moment in Real Flow for an Autonomous Submarine in Pure Sway Motion in PMM Test [Volume 9, Issue 3, 2019, Pages 205-216]
  • Hamedi, M. H. The alternating magnetic field and convection heat transfer implications for magnetic fluid hyperthermia- A numerical analysis [Volume 6, Issue 1, 2016, Pages 189-200]
  • Hanafizadeh, P. Using net present value as a single objective function for thermo-economic optimization of a plate-fin recuperator in microturbine [Volume 6, Issue 3, 2016, Pages 213-226]
  • Hasani, Amir Experimental extraction of modulus of elasticity of gastric cancer tissue using cylindrical developed contact mechanics models [Volume 13, Issue 4, 2023, Pages 83-94]
  • Hasani, M. Investigation of spike length on wave drag reduction of standard model in hypersonic flow [Volume 10, Issue 1, 2020, Pages 177-192]
  • Hasani, M. Dynamic Modeling and Controller Design for a Space Vehicle with Fuel Sloshing [Volume 11, Issue 2, 2021, Pages 25-40]
  • Hasani, S. Feature Extraction Based on Deep Learning for Mechanical Bearing Fault Detection and Classification in Squirrel Cage Induction Machine [Volume 11, Issue 5, 2021, Pages 33-48]
  • Hasanpour, K. Prediction of Forming Limit Diagram for Ti-64 titanium alloy sheet using finite element simulation [Volume 4, Issue 4, 2015, Pages 23-32]
  • Hasanvand, M. An analysis of stresses evaluation efficacy in adhesive single-lap joints [Volume 6, Issue 4, 2016, Pages 49-58]
  • Hashemabadi, M. Design and Numerical Investigation of a Small Scale Solar Chimney Using Computational Fluid Dynamics [Volume 6, Issue 3, 2016, Pages 271-280]
  • Hashemi, A. Finite Element Simulation & Experimental Study on Forming of Conical Parts by HDDRP: Process Window Diagram [Volume 5, Issue 4, 2016, Pages 139-150]
  • Hashemi, M. M. Numerical simulation of two-phase flow and study of behavior of aerosols and dust particles under different weather conditions and sedimentation process of dusts [Volume 8, Issue 2, 2018, Pages 251-264]
  • Hashemi, M. R. The evaluation of the angle of attack effects on structure of diamond wing with sharp leading edge being equipped with LEX by using flow visualization [Volume 9, Issue 3, 2019, Pages 265-275]
  • Hashemi, M. R. Experimental Study of LEX Angle Effect on Vortical Flow Over the Diamond Wing with Airfoil-Shaped Section by Using Hot-wire and Five-hole Probe [Volume 12, Issue 2, 2022, Pages 81-91]
  • Hashemi, R. Free vibration analysis of functionally graded graphene platelets – reinforced composite conical shell panels with different boundary conditions [Volume 12, Issue 2, 2022, Pages 49-64]
  • Hashemi, S. Nonlinear Free Vibration Analysis of Bi-directional Functionally Graded Rectangular Plates [Volume 10, Issue 1, 2020, Pages 31-52]
  • Hashemi, Sayyed H. Experimental study of ّFafracture Surface Characteristics of Inhomogeneous Drop Weight Tear Test Specimen Made from API X65 Steel [Volume 10, Issue 1, 2020, Pages 77-91]
  • Hashemi, Sayyed H. Experimental, numerical and analytical study of energy absorbtion in drop weight tear test specimen with chevron notch on API X65 steel [Volume 10, Issue 2, 2020, Pages 95-110]
  • Hashemi, Sayyed Hojat Determination of energy-notch depth relationship using force-displacement diagrams in instrumented Charpy impact testing of API X65 steel [Volume 12, Issue 6, 2023, Pages 149-162]
  • Hashemi, Seyyed H. Experimental study of low velocity impact effect on fracture energy of API X65 steel using drop weight tear test [Volume 11, Issue 2, 2021, Pages 57-71]
  • Hashemian, Seyed Majid Thermodynamic and economic analyses of combined generation system based on hybrid prime mover of internal and external combustion engines with natural gas and biomass power sources [Volume 13, Issue 6, 2024, Pages 103-119]
  • Hasheminejad, Seyyed Mohammad A collaborative simulation for active flow-induced vibration control of a circular cylinder [Volume 5, Issue 3, 2015, Pages 113-124]
  • Hassan, M. N. Numerical and Experimental Study on Guillotine Shearing of a Complex Profile Produced by Roll Forming process [Volume 10, Issue 3, 2020, Pages 1-15]
  • Hassani, A.H. Experimental and fractography investigation of notch depth effect by instrumented instrumented impact pendulum in 7075 Aluminum alloy [Volume 11, Issue 3, 2021, Pages 15-36]
  • Hassani, B. Analysis and Shape Optimization of Axsymmetric Structures by Isogeometric Analysis Method [Volume 1, Issue 1, 2011, Pages 1-13]
  • Hassani, B. Solution of Nonlinear Incompressible Hyperelastic Problems by Isogeometric Analysis Method [Volume 5, Issue 2, 2015, Pages 29-41]
  • Hassani, B. Adaptivity in isogeometric analysis of structures using error estimation methods based on stress recovery [Volume 5, Issue 3, 2015, Pages 79-91]
  • Hassani, B. Static analysis of laminated composite smart shells with considering the effect of the shear piezoelectric actuator using the isogeometric approach [Volume 10, Issue 4, 2021, Pages 53-66]
  • Hassani, Behrooz Stress Recovery and Error Estimation by Using Forces Induced on Patches of‎ Isogeometric Analysis [Volume 2, Issue 2, 2012, Pages 13-29]
  • Hassani, Behrooz Numerical simulation of buckling and postbuckling of single wall carbon nanotubes [Volume 5, Issue 1, 2015, Pages 77-86]
  • Hassani, M. Prediction of splitting airfoils horizontal spacing effects on loss distribution in an array distortion generator based on comparison of RANS, URANS and DES [Volume 11, Issue 5, 2021, Pages 211-223]
  • Hassani, S.M. Improvement of hydrothermal performance of microchannel heat sinks using V-shape pin-fins and Al2O3 / water nanofluid [Volume 8, Issue 4, 2019, Pages 211-228]
  • Hassanifard, S. Numerical simulation of FSW and FSSW with pinless tool of AA6061-T6 Al alloy by CEL approach [Volume 8, Issue 3, 2018, Pages 65-75]
  • Hassanpour Babajan, A. Experimental study of subsurface damage and material removal mechanisms in abrasive waterjet milling process of aluminum oxide ceramic [Volume 10, Issue 2, 2020, Pages 253-265]
  • Hassanzadeh, H. Thermodynamics modeling of heat and vapor transfer in the shell- and- tube membrane humidifier: a gas- to- gas type [Volume 5, Issue 3, 2015, Pages 223-236]
  • Hassanzadeh, H. Energy and Exergy Analysis and Optimization of a Cogeneration System Based on Solid Oxide Fuel Cell for Residential Applications [Volume 5, Issue 4, 2016, Pages 213-228]
  • Hassanzadeh, H. Reducing the undesirable effects of thermal asymmetry for a bus passengers by using airflow asymmetry under summer conditions [Volume 8, Issue 1, 2018, Pages 135-146]
  • Hassanzadeh, Mahdi Optimum Shape Design of Axisymmetric Extrusion Die by using Hybrid Meta-Heuristic Optimization (ICACO) [Volume 13, Issue 4, 2023, Pages 107-117]
  • Hatami, Hossein Experimental and analytical investigation of bending and impact properties of steel composite beams with high performance concrete [Volume 12, Issue 6, 2023, Pages 99-111]
  • Hatami, M. Flow Field Analysis of a Synthetic Jet in the Presence of a Crossflow: Application of Different Turbulence Models [Volume 8, Issue 4, 2019, Pages 197-210]
  • Havasi, M. Identification of the Droplet Group Combustion Formation Region by the Flame Index Parameter in the Laminar Counterflow Spray [Volume 11, Issue 1, 2021, Pages 212-199]
  • Hazbavi, A. Second Law Analysis of Micropolar Fluid Flow Between Two Inclined Parallel Plates [Volume 7, Issue 1, 2017, Pages 289-300]
  • Hedayati, A. Design, optimization and manufacture of exhaust manifold for a outboard spark ignition engine [Volume 10, Issue 1, 2020, Pages 253-268]
  • Heidari, H. R. Vibration suppression of flexible two link robot using piezoelectric transducer on a predefined path [Volume 7, Issue 3, 2017, Pages 185-197]
  • Heidari, S. A recursive algorithm to exploit a multiple-arm space manipulator equations of motion by the Lagrange method in terms of quasi-coordinates [Volume 9, Issue 4, 2019, Pages 15-26]
  • Heidari Shirazi, K. Study on Free Vibration of Buckled Cracked Plates Using Differential Quadrature Element Method [Volume 8, Issue 4, 2019, Pages 67-83]
  • Heidarpour, B. Analytical investigation of the leg geometric characteristics effect of the electronic board on the shock transmission caused by satellite separation [Volume 13, Issue 1, 2023, Pages 15-23]
  • Heidary Rouchi, A. Stress and Strain Analysis of Femur in Taylor Spatial Frame [Volume 8, Issue 1, 2018, Pages 13-21]
  • Heiran, Fatemeh Investigating the effects of geometric and environmental parameters on the governing equations of scanning earth horizon sensor and attitude determination error analysis [Volume 12, Issue 5, 2022, Pages 73-91]
  • Heirani, Hasan Proposing an analytical relationship to calculate the damping inclination of rigid single mass impact dampers [Volume 12, Issue 6, 2023, Pages 139-148]
  • Hejazi, M. Numerical Simulation of Wind Interference Effects Around a Group of Tall Buildings [Volume 5, Issue 2, 2015, Pages 285-301]
  • Hejazi, Mehrdad Structural Analysis of Persian Historical Brick Masonry Minarets under Wind Load [Volume 5, Issue 1, 2015, Pages 165-176]
  • Hejranfar, K. Numerical simulation of wave-floating bodies interaction using a truly incompressible SPH method with artificial compressibility approach [Volume 8, Issue 1, 2018, Pages 241-252]
  • Hematiyan, M. R. Natural Frequency Optimization of 2D and 3D Truss Structures Using a Discrete Sensitivity Analysis [Volume 6, Issue 4, 2016, Pages 23-40]
  • Hematiyan, M.R Identification of Stiffness and Damping Coefficients of Beams Supports [Volume 6, Issue 1, 2016, Pages 43-60]
  • Hematiyan, M.R. Identification of the Failure Load of a Hyperelastic Body Considering the Location of the Failure [Volume 13, Issue 5, 2023, Pages 167-186]
  • Hemmati, R. Effects of boundary conditions, cone angle and core material on free vibration of the joined sandwich conical-conical shell [Volume 9, Issue 4, 2019, Pages 167-180]
  • Heshmati, M. Analysis of fluid-structure interaction in a pipeline with symmetric and asymmetric branching conveying turbulent flow: A case study [Volume 11, Issue 2, 2021, Pages 119-131]
  • Heydari, A. Damped vibration of tapered and bidirectional graded plate subjected to arbitrary radial load rested on elastic medium [Volume 11, Issue 5, 2021, Pages 107-118]
  • Heydari, H.R. Investigating the ratcheting and shakedown behavior of a carbon steel sheet under cyclic thermal loading and axial loading using Bree diagram [Volume 11, Issue 6, 2022, Pages 143-157]
  • Heydari, K. Simulation and performance investigation of a typical guidance system with suitable modeling of the guidance system elements and its sensitivity with respect to aerodynamic coefficients [Volume 8, Issue 2, 2018, Pages 235-249]
  • Heydari, M. M. The effects of processes heating and evaporation of droplet on the Low frequency combustion instability [Volume 7, Issue 4, 2018, Pages 251-265]
  • Heydari Beni, M. Free Vibration Analysis of Carbon Nanotube Grid Composite Cylindrical Shell with First-Order Shear Deformation Theory [Volume 10, Issue 4, 2021, Pages 77-96]
  • Heydary, A. Investigating the ground effect on aerodynamic characteristics of airfoil in oscillatory flow [Volume 5, Issue 3, 2015, Pages 185-196]
  • Hojaji, M. Experimental Investigation of the Effect of Location of Cylindrical Protuberance on the Thrust Vector of a Supersonic C-D nozzle [Volume 9, Issue 1, 2019, Pages 237-249]
  • Hojatian, Sh. Experimental investigation of effect of inlet direction and height on flow pattern and thermal comfort conditions under personalized confluent jets ventilation system [Volume 11, Issue 3, 2021, Pages 195-205]
  • Hojatpanh Montazary, A. Analysis and Shape Optimization of Axsymmetric Structures by Isogeometric Analysis Method [Volume 1, Issue 1, 2011, Pages 1-13]
  • Hooshyar, R. Response of reinforced metallic plates with polyurea coating subjected to high-velocity projectile impact by finite element method and presenting a model based on evolutionary regression [Volume 10, Issue 1, 2020, Pages 133-148]
  • Hormozi, F. Modelling and Optimization of Geometrical Parameters in Design of the Wavy-Fin-Plate Compact Heat Exchanger by Taguchi method [Volume 12, Issue 3, 2022, Pages 89-101]
  • Hoseini, ٍEhsan Impedance adaptive control of an active suspension system [Volume 4, Issue 3, 2014, Pages 11-21]
  • Hoseini, Seyed Hosein Nonlinear numerical elasticity analysis of eccentric low-velocity impact of rectangular sandwich plate with composite face sheets subjected to biaxial preloads [Volume 5, Issue 1, 2015, Pages 87-99]
  • Hoseini Sabzevari, S. A. Experimental Analysis of Effective Parameters on Human Balance During Standing and Gaiting [Volume 8, Issue 1, 2018, Pages 51-57]
  • Hoseini Sabzevari, Seyed A. Experimental Analysis of Elastic Dampers Effect on Reflected Waves from Plate Edges in Sound Localization [Volume 8, Issue 3, 2018, Pages 205-212]
  • Hoseini Sabzevari, Seyed Amir Leakage localization in a pressurized gas pipe [Volume 12, Issue 6, 2023, Pages 181-190]
  • Hoseinpour, M. Finite Element Simulation & Experimental Study on Forming of Conical Parts by HDDRP: Process Window Diagram [Volume 5, Issue 4, 2016, Pages 139-150]
  • Hoseintabar Marzebali, M. Feature Extraction Based on Deep Learning for Mechanical Bearing Fault Detection and Classification in Squirrel Cage Induction Machine [Volume 11, Issue 5, 2021, Pages 33-48]
  • Hoseintabar Marzebali, Mohammad Isolation of Rotor Asymmetry Fault in Induction Machines through Sign-based Rotating Reference Frame and Generalized Goertzel Algorithm [Volume 12, Issue 6, 2023, Pages 25-33]
  • Hosseinalipour, S. Mostafa Aerothermal Analysis of Rotation and Rotational Buoyancy Effect on Internal Cooling of Gas Turbine Blade- An Experimental study [Volume 8, Issue 3, 2018, Pages 277-288]
  • Hosseini, Kh. Using Collocation Discrete Least Squares Meshless method in solving governing equations for non-Newtonian fluids by Herschel- Bulkley model [Volume 11, Issue 2, 2021, Pages 247-259]
  • Hosseini, M. Nonlinear Vibration Analysis of Micro Rotating Euler- Bernoulli Beams Subjected to Loading Based on the Strain Gradient Theory [Volume 10, Issue 3, 2020, Pages 181-193]
  • Hosseini, M. Analysis of FGM Rotating Disk Based on Non-Fourier Heat Conduction Model under Electromagnetic Field [Volume 11, Issue 4, 2021, Pages 53-70]
  • Hosseini, R. Vibration Energy Harvesting Using Bimorph Piezoelectric Cantilever [Volume 7, Issue 1, 2017, Pages 1-9]
  • Hosseini, R. An Experimental Investigation into Width Reduction Effect on the Efficiency of Piezopolymer Vibration Energy Harvester [Volume 7, Issue 3, 2017, Pages 41-51]
  • Hosseini, R. An Experimental Investigation of Power Scavenging from Human Walking [Volume 7, Issue 4, 2018, Pages 173-181]
  • Hosseini, R. Experimental and numerical study of core and face-sheet thickness effects in sandwich panels with foam core and aluminum face-sheets subjected to blast loading [Volume 8, Issue 3, 2018, Pages 91-106]
  • Hosseini, R. Free lateral vibration analysis of inhomogeneous beams under various boundary conditions [Volume 8, Issue 3, 2018, Pages 123-135]
  • Hosseini, R. Experimental and Numerical Study of Deformation of FML Plates with the Same Thickness Under Explosive Loading [Volume 8, Issue 4, 2019, Pages 129-142]
  • Hosseini, R. An analytical model Presentation and experimental investigation of the penetration ‎depth of the rigid blunt projectile on the perforated metal plate [Volume 10, Issue 4, 2021, Pages 241-251]
  • Hosseini, R. Experimental and numerical evaluation of energy absorption capacity of sandwich panel with polyurethane foam core reinforced with mineral pumice under explosive loading [Volume 12, Issue 4, 2022, Pages 27-40]
  • Hosseini, Rouhollah Dynamic Response of Curved Sandwich Beam with a Soft Flexible Core Subjected to Radial Low Velocity Impact [Volume 5, Issue 1, 2015, Pages 1-11]
  • Hosseini, Seiyed Mohammad Javad Performance improvement in refrigeration systems using fin-reinforced phase change material [Volume 13, Issue 4, 2023, Pages 159-170]
  • Hosseini, Seyed H. Penetration of Armored Piercing Projectile into Ultra-High Strength Steel Targets: Numerical and Experimental Investigation [Volume 8, Issue 2, 2018, Pages 81-92]
  • Hosseini, Seyed H. Numerical and Experimental Investigation of Structural Integrity in Armored Vehicle Due to Explosive Loading [Volume 8, Issue 3, 2018, Pages 193-204]
  • Hosseini, Seyed M. Investigation of parameters affecting the roughness and cylindricality of holes in PLA parts made of 3D printing by fused deposition modeling process using response surface method [Volume 11, Issue 3, 2021, Pages 119-133]
  • Hosseini, Seyed V. Investigation of the Effect of Crystallographic Orientation and Non-Rigid Tool on Nickel Hardness in Nanoindentation Process using Molecular Dynamics Simulation [Volume 11, Issue 1, 2021, Pages 213-226]
  • Hosseini, V. Determination of Cylinder Head Bolts Force Distribution and There’s Life in Real Condition of Marine Diesel Engine [Volume 10, Issue 3, 2020, Pages 47-59]
  • HOSSEINI, SEYEDVAHID Theoretical and Numerical Analysis of deformation in fixture body plates [Volume 12, Issue 3, 2022, Pages 13-32]
  • Hosseini Abbandanak, Seyyed N. Effect of functionalized Graphene Nanoplates on the Mechanical Properties of Vinil Ester/ Glass Fibers Compositete [Volume 10, Issue 4, 2021, Pages 1-14]
  • Hosseini Baghdad Abadi, M. Numerical Investigation of the Effect of Sinusoidal Pulsating Cooling Air on Film Cooling Effectiveness of Leading Edge, Pressure and Suction Side of a Turbine Blade [Volume 9, Issue 2, 2019, Pages 227-247]
  • Hosseini Farrash, Seyyed M. Superharmonic resonance analysis of a grid stiffened truncated conical shell subjected to external transverse force [Volume 10, Issue 4, 2021, Pages 111-123]
  • Hosseini Farrash, Seyyed M. Investigation of dry sliding behavior of metal on nanocomposites reinforced with carbon nanotubes and nanoclay [Volume 11, Issue 6, 2022, Pages 85-95]
  • Hosseini-Hashemi, S. Investigating simultaneous effects of tensile-compressive and shear moduli of van der Waals interactions on the vibration of bilayer graphene nanoribbons for different boundary condition [Volume 6, Issue 2, 2016, Pages 295-310]
  • Hosseini Kahsari, S. M. J. Effect of increasing number and arrangement of hot fluid tube on melting behavior of Phase Change Material in a triplex tube heat exchanger [Volume 6, Issue 4, 2016, Pages 249-262]
  • Hosseini Kordkheili, S. A. Experimental investigation of vibrational-damping properties of a viscoelastic material [Volume 6, Issue 4, 2016, Pages 161-171]
  • Hosseini Moghaddam, S. S. Vibration Energy Harvesting Using Bimorph Piezoelectric Cantilever [Volume 7, Issue 1, 2017, Pages 1-9]
  • Hosseinipour, Seyed J. Numerical and experimental study on the effect of forming speed in gradient warm deep drawing process [Volume 8, Issue 2, 2018, Pages 51-66]
  • Hosseinipour, S.J. GTN Damage Model Parameters for Ductile Fracture Simulation in Aluminum Alloy 5083-O [Volume 6, Issue 1, 2016, Pages 129-142]
  • Hosseinirad, E. Modelling and Optimization of Geometrical Parameters in Design of the Wavy-Fin-Plate Compact Heat Exchanger by Taguchi method [Volume 12, Issue 3, 2022, Pages 89-101]
  • Hosseini-Sianaki, A. Vibration analysis of multi-directional functionally graded nanoplates with initial geometric imperfection using quasi-3d theory based on an isogeometric approach [Volume 11, Issue 6, 2022, Pages 111-126]
  • Hosseinjani, Ali Akbar Numerical study of the flow around cylinders with different cross sections via immersed boundary method [Volume 3, Issue 4, 2014, Pages 111-123]
  • Hossein Nezhad, A. Experimental and Numerical Investigation on the Parameters of Ventilated Super Cavitation around 30 degree Conical Cavitator [Volume 5, Issue 3, 2015, Pages 303-314]
  • Hosseinpour Kalateh, H. Adaptive Backstepping Control for 4 DOF SCARA Robot in the Presence of Uncertainties [Volume 5, Issue 4, 2016, Pages 297-307]
  • Hosseinzadeh, A. Experimental and fractography investigation of notch depth effect by instrumented instrumented impact pendulum in 7075 Aluminum alloy [Volume 11, Issue 3, 2021, Pages 15-36]
  • Hosseinzadeh, M. Experimental Investigation of Indoor Cooking Using an Indirect Solar Cooker Integrated with Heat Storage Materials [Volume 11, Issue 3, 2021, Pages 207-219]
  • Hosseinzadeh, M. Thermodynamic Analysis of an Evacuated Tube Solar Cooker under Different Operating Conditions [Volume 11, Issue 5, 2021, Pages 259-268]
  • Hosseinzadeh Salehkouh, S. Experimental Investigation of Spot Welding Process on Metallic Targets Impacted by Flat and Conical Projectiles [Volume 9, Issue 3, 2019, Pages 39-49]
  • Hossinalipour, S. M. Thermo-Fluid Investigation on the Effect of Rotation on Film Cooling Performace at Pressure & Suction Side of the Leading-Edge of a Gas Turbine Blade [Volume 11, Issue 5, 2021, Pages 133-148]
  • Houshfar, E. Numerical investigation of temperature field and laminar flame structure of inclined impinging jets of methane and hydrogen [Volume 9, Issue 4, 2019, Pages 251-261]
  • Houshmand, A. Experimental Study on Heat Transfer of Water/TiO2 Nanofluid in a Straight Tube with Twisted Tapes at Constant Wall Temperature [Volume 5, Issue 3, 2015, Pages 165-172]
  • Houshmand, B. Using of Machine Vision System for Offline Setup Cast parts on CNC Milling Machine with Industrial Application Approach [Volume 11, Issue 1, 2021, Pages 239-255]

I

  • Ilbeigi, M. The evaluation of the angle of attack effects on structure of diamond wing with sharp leading edge being equipped with LEX by using flow visualization [Volume 9, Issue 3, 2019, Pages 265-275]
  • Imani, Amin A review on the structures and characteristics of micro-turbojet engines [Volume 13, Issue 5, 2023, Pages 59-76]
  • Imani, K. Analysis of axial symmetric circular cylindrical shell vibrations using high-order theory to approximate transverse displacement by finite element [Volume 11, Issue 2, 2021, Pages 87-97]
  • Imani Nejad, Z. Influence of air inlet diffuser layout on indoor air quality and occupants’ thermal comfort in a room with baseboard heating system [Volume 6, Issue 3, 2016, Pages 261-270]
  • Imani Nejad, Z. Comparison the Performance of Rajagopal Musculoskeletal Model and its Updated Versions in Prediction of the Knee Joint Contact Forces During Walking and Squatting [Volume 11, Issue 5, 2021, Pages 83-94]
  • Irani Rahagi, M. Optimization of Bearing Location for Multi-Stepped Rotor by Genetic Algorithm [Volume 6, Issue 1, 2016, Pages 99-106]
  • Irani Rahagi, M. Free vibration of rotating FGM conical shell with smart patches [Volume 10, Issue 2, 2020, Pages 127-140]
  • Irani Rahagi, M. Active vibration control of rotating FGM conical shell via piezoelectric patches [Volume 11, Issue 1, 2021, Pages 13-29]
  • Iranpour, A.K. Numerical investigations of the influence of effective parameters on efficiency of DASC with CuO-H2O nanofluid [Volume 7, Issue 1, 2017, Pages 91-100]
  • Islamy, M.H. Investigation of spike length on wave drag reduction of standard model in hypersonic flow [Volume 10, Issue 1, 2020, Pages 177-192]
  • Isvandzibaei, Mohammad Reza Optimization of Shear Strength of 420 Stainless Steel Brazing Joints Using BNi-2 by Response Surface Methodology [Volume 13, Issue 6, 2024, Pages 47-58]
  • Isvandzibaei, M. R. Analysis of Natural Frequency of Reinforced Multi-Layered Isotropic Cylindrical Shell with Three Rings under External Pressures Based on FSDT [Volume 8, Issue 3, 2018, Pages 233-246]
  • Izadi, M. Experimental investigation of effect of inlet direction and height on flow pattern and thermal comfort conditions under personalized confluent jets ventilation system [Volume 11, Issue 3, 2021, Pages 195-205]
  • Izadi, M. Numerical Study of Slot Lip Effects on Aerodynamics Performance of a Two-Element Airfoil with the Approach of Decreasing the Landing Distance [Volume 13, Issue 1, 2023, Pages 99-109]
  • Izadi, Mohsen Effect of inclination angle on convection heat transfer inside porous enclosure exposed to non uniform magnetic field [Volume 12, Issue 5, 2022, Pages 253-265]
  • Izadpanah, E. natural convection heat transfer of a nanofluid in a baffle L-Shaped cavity [Volume 6, Issue 3, 2016, Pages 311-321]
  • Izadpanah, E. Numerical solution to the multi- layer core- annular flow of two fluids with different viscosities using Spectral Element Method [Volume 8, Issue 4, 2019, Pages 249-260]
  • Izadpanah, S. Experimental Analysis of the Strain Effect on the Anisotropic Coefficients of 6061 Aluminum Sheet Using Digital Image Processing [Volume 6, Issue 1, 2016, Pages 73-84]
  • Izanloo, M. Analysis of torsional and bending stiffness of a sedan vehicle using simplified Finite element model [Volume 7, Issue 2, 2017, Pages 17-26]

J

  • Jabbari, A. Investigation of operational parameters on the motional behavior and maximum particle levitated density in ultrasonic levitation [Volume 11, Issue 3, 2021, Pages 71-84]
  • Jabbari, Ali Experimental and theoretical investigation of Young's modulus of liver cancer tissue using rectangular, V-shaped and dagger cantilevers of an atomic force microscope [Volume 13, Issue 5, 2023, Pages 121-135]
  • Jabbari, E. Numerical simulation of two-phase flow and study of behavior of aerosols and dust particles under different weather conditions and sedimentation process of dusts [Volume 8, Issue 2, 2018, Pages 251-264]
  • Jabbarifar, Omid Analysis of the effect of surface slope changes on the growth, motion, and coalescence of droplets in dropwise condensation [Volume 12, Issue 6, 2023, Pages 163-180]
  • Jabbari Mostahsan, A. H. Optimization of Radiation Shields Parameters in Multi-Layer Thermal Insulations [Volume 8, Issue 1, 2018, Pages 71-81]
  • Jadidi, A. M. Investigating the limit behavior of cavitation phenomana around circular cylinder with various diameters at high speed cavitation tunnel [Volume 8, Issue 1, 2018, Pages 147-156]
  • Jafarbeglo, B. Design, fabrication and modeling of a new solar still desalination system and evaluation of its performance [Volume 8, Issue 2, 2018, Pages 205-220]
  • Jafari, A. Numerical solution to the multi- layer core- annular flow of two fluids with different viscosities using Spectral Element Method [Volume 8, Issue 4, 2019, Pages 249-260]
  • Jafari, A. Enhancing numerical stability in simulation of viscoelastic fluid flows at high weissenberg number problem [Volume 9, Issue 3, 2019, Pages 217-230]
  • Jafari, A. Solving Two Classical Fluid-Structure Interaction Problem Utilizing Differential Transform Method [Volume 10, Issue 3, 2020, Pages 17-30]
  • Jafari, A. A Free vibration of rotating FGM conical shell with smart patches [Volume 10, Issue 2, 2020, Pages 127-140]
  • Jafari, A. A. Effect of welding residual stress on natural frequencies using experimental and numerical analysis [Volume 6, Issue 4, 2016, Pages 91-101]
  • Jafari, A. A. Nonlinear Free Vibration Analysis of Bi-directional Functionally Graded Rectangular Plates [Volume 10, Issue 1, 2020, Pages 31-52]
  • Jafari, A. A. Active vibration control of rotating FGM conical shell via piezoelectric patches [Volume 11, Issue 1, 2021, Pages 13-29]
  • Jafari, A. A. Nonlinear Vibration Analysis of Asymmetric Rotor with Misaligned Coupling Using Timoshenko Beam Theory [Volume 11, Issue 3, 2021, Pages 37-51]
  • Jafari, A.A Investigation of free and forced vibration of a composite circular cylindrical shell with internal fluid [Volume 7, Issue 2, 2017, Pages 93-109]
  • Jafari, A.A. Free nonlinear vibration analyzing of annular sector plate in contact with fluid [Volume 11, Issue 2, 2021, Pages 73-86]
  • Jafari, H. Flow field modeling and performance improving of an axial turbine's using Adjoint method [Volume 8, Issue 1, 2018, Pages 127-133]
  • Jafari, I. Experimental Investigation of Cavitation Phenomena Around the Body with the Conic Nose and Cylindrical Afterbody [Volume 9, Issue 2, 2019, Pages 249-259]
  • Jafari, M. A Study of the effect of various parameters on the stress analysis of isotropic and anisotropic plates containing a central rectangular hole subjected to shear stress [Volume 5, Issue 1, 2015, Pages 101-114]
  • Jafari, M. Airfoil Profile Reformation of Bladeless Fan and Investigation of Flow Increase Curve [Volume 5, Issue 2, 2015, Pages 169-179]
  • Jafari, M. Evaluation of optimal parameters affecting of isotropic plates with polygonal cutout under shear load using particle swarm algorithm [Volume 6, Issue 2, 2016, Pages 29-40]
  • Jafari, M. Investigation of Effective Parameters on Triangular Cutout Stress in Finite Isotropic Plates [Volume 7, Issue 1, 2017, Pages 35-50]
  • Jafari, M. An analytical solution for asymmetric non-Fourier heat conduction in a long solid orthotropic cylinder [Volume 9, Issue 3, 2019, Pages 95-108]
  • Jafari, M. Investigation of dry sliding behavior of metal on nanocomposites reinforced with carbon nanotubes and nanoclay [Volume 11, Issue 6, 2022, Pages 85-95]
  • Jafari, S. Numerical study of energy absorption in composite sandwich structures under low velocity impact [Volume 7, Issue 1, 2017, Pages 51-64]
  • Jafari, Saeed Numerical Study of Solid Particle Deposition on a Square Filter Using Lattice Boltzmann Method [Volume 5, Issue 2, 2015, Pages 249-260]
  • Jafarian, A. Study and Investigation of Secondary Sedimentation Tank Equipped with Lamella using Discrete Phase Model (DPM) [Volume 9, Issue 1, 2019, Pages 173-186]
  • Jafarian, Ali Development of the Conceptual Design Algorithm for Tactical Aerostat [Volume 13, Issue 2, 2023, Pages 103-120]
  • Jafari-Baghjeghaz, M. Study of the Compressive Behavior of Fiber-Metal Hybrid Structures Reinforced by Jute-Glass Fibers [Volume 8, Issue 4, 2019, Pages 153-164]
  • Jafari Gavzan, I. Investigation of Transient Heat Transfer inside Walls of Convergent-Divergent Nozzle [Volume 10, Issue 3, 2020, Pages 245-263]
  • Jafari Gavzan, Iraj Investigating the limit behavior of cavitation phenomana around circular cylinder with various diameters at high speed cavitation tunnel [Volume 8, Issue 1, 2018, Pages 147-156]
  • Jafariniasar, M. Free vibration of rotating FGM conical shell with smart patches [Volume 10, Issue 2, 2020, Pages 127-140]
  • Jafariniasar, M. Active vibration control of rotating FGM conical shell via piezoelectric patches [Volume 11, Issue 1, 2021, Pages 13-29]
  • Jafarkazemi, Farzad Experimental and numerical study of V-Cone flowmeter with continuous nose in single phase liquid flow [Volume 13, Issue 6, 2024, Pages 152-139]
  • Jafarmadar, S. Energy and exergy analyses of various configures for combined flash-binary cycles using Sabalan geothermal wells [Volume 9, Issue 4, 2019, Pages 237-249]
  • Jaffari, M. Estimation of stress concentration factor of composite lamina with triangular hole using multiple linear regression [Volume 8, Issue 2, 2018, Pages 25-36]
  • Jaffari, Mohhamad Determination of optimum parameters effect on stress distribution in orthotropic plates with quasi-square cut out using genetic algorithm [Volume 4, Issue 4, 2015, Pages 87-99]
  • Jahannama, M. R. A Numerical Study of Emulsification Process in Microfluidic Flow-Focusing Devices [Volume 6, Issue 1, 2016, Pages 273-284]
  • Jahanshahi Javaran, E. investigation of rheological behavior of suspensions included power-law fluid by combined lattice-Boltezmann method with smoothed profile method [Volume 9, Issue 2, 2019, Pages 197-210]
  • Jahanshahi Javaran, E. Performance optimization of organic Rankin cycle (ORC) based on comparative study of Box –Behnken and central Composite design methods [Volume 11, Issue 2, 2021, Pages 219-232]
  • Jahantigh, N. Numerical study of effect of uniform sinusoidal roughness elements on nanofluid natural convection, using lattice Boltzmann method [Volume 8, Issue 4, 2019, Pages 273-286]
  • Jalali, A. Noise Analysis & Flow Simulation in Angle Globe Valve with Different Cages [Volume 8, Issue 4, 2019, Pages 261-271]
  • Jalali, A. Investigation of the process parameter effects on the hole geometry characteristics in laser drilling of Hastelloy X superalloy [Volume 9, Issue 1, 2019, Pages 45-54]
  • Jalali, A. Design, optimization and manufacture of exhaust manifold for a outboard spark ignition engine [Volume 10, Issue 1, 2020, Pages 253-268]
  • Jalali, A. Superharmonic resonance analysis of a grid stiffened truncated conical shell subjected to external transverse force [Volume 10, Issue 4, 2021, Pages 111-123]
  • Jalali, A. A. A New Method for Extracting an Optimal Sliding Surface and Its Application to Control of a Quarter Car Active Suspension System [Volume 5, Issue 2, 2015, Pages 1-15]
  • Jalali Aghchai, A. Investigation of springback behavior of fibre-metal laminates using equivalent-layer and separate-layer theories [Volume 6, Issue 4, 2016, Pages 1-9]
  • Jalali Aghchai, A. Study on the influences of effective parameters on the fatigue life of welded joint between locomotive gearbox baracket and bogie using FE model verified by experimental results [Volume 7, Issue 2, 2017, Pages 27-43]
  • Jalali Aghchai, Abdol. H. Experimental and Numerical Study on forming limit diagram of two-layer metallic sheets at high temperature [Volume 10, Issue 1, 2020, Pages 107-120]
  • Jalali Aghchai, Abdolhossein Investigation of the effects of geometric parameters of layers on the formability of Aluminum/Polyurethane/Aluminum sandwich sheets [Volume 6, Issue 1, 2016, Pages 61-71]
  • Jalali Aghchai, Abdolhossein An investigation into the effect of surface preparation method and heat Treatment on mechanical properties of multilayer Al / Al / Steel sheet produced by cold roll bonding [Volume 13, Issue 2, 2023, Pages 55-67]
  • Jalali Aghchai, A.H Experimental study on the effect of Friction Stir Spot Welding process parameters on the shear strength of created joints in AA7075-T6 [Volume 7, Issue 3, 2017, Pages 53-66]
  • Jalaly, Alireza Improving the Dynamic Properties of the Crank-Slider Mechanism with Joint Clearance Using Optimal Flexure Joint [Volume 12, Issue 3, 2022, Pages 1-12]
  • Jalili, M. M. Determination of Stability Regions of Wheel and Workpiece in Plunge Grinding Process Using a 3-D Workpiece Model [Volume 7, Issue 3, 2017, Pages 67-82]
  • Jalilimehr, M. Numerical and experimental study of natural gas preheating effects on the soot formation, flame luminosity and NO emission [Volume 7, Issue 1, 2017, Pages 79-90]
  • Jamali, A. Experimental Study and Mathematical Modeling of Deformation of Rectangular Plates under the Impact Load [Volume 6, Issue 1, 2016, Pages 143-152]
  • Jamali, A. Multi-objective optimization of electrochemical machining parameters using response surface methodology [Volume 7, Issue 4, 2018, Pages 49-60]
  • Jamali, Ali Developing a Multi-Objective Game Theoretic Design of Path-Generating Planar Mechanism [Volume 13, Issue 6, 2024, Pages 17-29]
  • Jamee, M. Flexural Behavior of High Performance Cementitious Composites Reinforced With Hooked Steel Fibers [Volume 5, Issue 3, 2015, Pages 125-136]
  • Jamshidi, H. Nonlinear Vibration Analysis of Asymmetric Rotor with Misaligned Coupling Using Timoshenko Beam Theory [Volume 11, Issue 3, 2021, Pages 37-51]
  • Jamshidi, Z. Thermo-Fluid Investigation on the Effect of Rotation on Film Cooling Performace at Pressure & Suction Side of the Leading-Edge of a Gas Turbine Blade [Volume 11, Issue 5, 2021, Pages 133-148]
  • Jamshidi Aval, H. GTN Damage Model Parameters for Ductile Fracture Simulation in Aluminum Alloy 5083-O [Volume 6, Issue 1, 2016, Pages 129-142]
  • Jandaghi Alaee, F. Flexural Behavior of High Performance Cementitious Composites Reinforced With Hooked Steel Fibers [Volume 5, Issue 3, 2015, Pages 125-136]
  • Jandaghi Alaee, F. Analytical study on flexural behaviour of fiber and steel reinforced concrete beams [Volume 7, Issue 3, 2017, Pages 113-131]
  • Janghorbani Ghaheh, Vali Allah The Formation Of Optimal Null Basis Vectors For The Force Method Analysis Of Finite Element Models Comprising Tetrahedron Elements Using Ant Colony Algorithm [Volume 4, Issue 3, 2014, Pages 1-9]
  • Jarrahi, Miad A collaborative simulation for active flow-induced vibration control of a circular cylinder [Volume 5, Issue 3, 2015, Pages 113-124]
  • Jaryani, G. Tank vehicles rollover threshold acceleration under fluid sloshing considering the method of mapping [Volume 5, Issue 4, 2016, Pages 163-176]
  • Javabvar, Daruosh Exprimental investigation of effect of material temperature and die profile on mechanical and metallurgical properties of 6061 Aluminum Alloy in Forward Thixoextrusion process [Volume 4, Issue 2, 2014, Pages 53-65]
  • Javadi, Seyed Moein Numerical study of the use of focused ultrasound waves by the phased array method in the inspection of polyethylene pipe joints. [Volume 13, Issue 5, 2023, Pages 155-165]
  • Javadi Malabad, Seyed Mohammad Numerical study of solid-gas two phase flow in air-side of a compact heat exchanger using Lagrangian approach [Volume 8, Issue 2, 2018, Pages 143-159]
  • Javadpour, Seyyed M. Experimental and Numerical Investigation on the Parameters of Ventilated Super Cavitation around 30 degree Conical Cavitator [Volume 5, Issue 3, 2015, Pages 303-314]
  • Javadpour, S. M. Experimental investigation of head resistance reduction by air bubbles in turbulent Couette-Taylor flow [Volume 7, Issue 1, 2017, Pages 147-160]
  • Javaherdeh, K. Parametric analysis and optimization of a ground source heat pump with economizer [Volume 6, Issue 1, 2016, Pages 215-224]
  • Javareshkian, M. nvestigation of a Broad category Of AUSM Family in the 1D and 2D Unsteady Flows [Volume 10, Issue 4, 2021, Pages 303-315]
  • Javdani, H. Analytical and experimental investigation on stretch forming of an anisotropic DC04 steel sheet [Volume 12, Issue 4, 2022, Pages 69-79]
  • Javid, M. Parametric Investigation of Buckling Capacity Improvement of Cracked Columns with Piezoelectric Patches [Volume 6, Issue 3, 2016, Pages 55-64]
  • Jazirian, Hesam Experimental and numerical study of V-Cone flowmeter with continuous nose in single phase liquid flow [Volume 13, Issue 6, 2024, Pages 152-139]
  • Joodaki, Ali Development and Evaluation of two Hybrid Shape Design Algorithms in Fluid Mechanics [Volume 4, Issue 4, 2015, Pages 1-12]
  • Joodzadeh, Amir Simulation Of Ramin Power Plant Cooling Towers operation and Consider Packing substitute in their Efficiency [(Articles in Press)]
  • Joudaki, J. Penetration of Armored Piercing Projectile into Ultra-High Strength Steel Targets: Numerical and Experimental Investigation [Volume 8, Issue 2, 2018, Pages 81-92]
  • Joudaki, J. Numerical and Experimental Investigation of Structural Integrity in Armored Vehicle Due to Explosive Loading [Volume 8, Issue 3, 2018, Pages 193-204]
  • Joulaei, Amir Numerical investigation of the effects of Helmholtz resonator and primary flow oscillations on subsonic ejector performance [Volume 13, Issue 5, 2023, Pages 19-42]

K

  • Kadivar, M. H Dynamic Analysis of Autofrettage under Transient Loading in FG Thick-Walled Cylinder with Work Hardening Behavior Using Numerical Method [Volume 9, Issue 1, 2019, Pages 27-43]
  • Kadkhodayan, M. Sheet EMF using convex punch instead of concave die [Volume 6, Issue 1, 2016, Pages 29-42]
  • Kadkhodayan, M. A survey on processing map for the hot deformation of Copper - Alumina nanocomposites using artificial neural network [Volume 7, Issue 2, 2017, Pages 55-62]
  • Kaffash Mirzarahimi, M. Experimental and numerical evaluation of energy absorption capacity of sandwich panel with polyurethane foam core reinforced with mineral pumice under explosive loading [Volume 12, Issue 4, 2022, Pages 27-40]
  • Kahani, Mostafa Evaluation of multi-effect distillation unit (MED) for desalination of Iranshahr steam power plant effluents using heat losses of boiler blowdown [Volume 13, Issue 6, 2024, Pages 89-102]
  • Kahhal, P. Multiobjective Optimization Method for Drawbead and Blank-Holder Force Design in Sheet Metal Forming Process [Volume 6, Issue 2, 2016, Pages 167-179]
  • Kahrom, M. Experimental and numerical investigation of blade shape effect on the Hunter wind turbines efficiency [Volume 6, Issue 2, 2016, Pages 329-339]
  • Kalantar, V. Experimental Investigation of the Forced Convective Heat Transfer of hybrid Cu / Fe3O4 Nanofluids [Volume 8, Issue 4, 2019, Pages 229-238]
  • Kalantar, V. Experimental study of the effect of position and intensity of a constant magnetic field on the forced convection heat transfer of Fe2O3 / water nanofluid in the developing thermal region [Volume 11, Issue 1, 2021, Pages 43-58]
  • Kalantar, Vali Experimental analysis of the performance of a bidirectional single-unit air compressor with a semi-gear and rack mechanism in power transmission [Volume 13, Issue 2, 2023, Pages 129-142]
  • Kalantari, Rouzbeh Side panel of B-Class body in white vehicle design and side crash finite element simulation [Volume 5, Issue 3, 2015, Pages 51-64]
  • Kalantary, M. H. Experimental investigation of Boundary Layer on an Oscillating (Pitching) Supercritical Airfoil in Compressible Flow Using Multiple Hot Film Sensors [Volume 5, Issue 3, 2015, Pages 173-184]
  • Kalteh, Mohammad Performance evaluation of conventional and sloped solar chimney power plants in different climates of Iran [Volume 4, Issue 3, 2014, Pages 137-146]
  • Kamali, K. Investigating simultaneous effects of tensile-compressive and shear moduli of van der Waals interactions on the vibration of bilayer graphene nanoribbons for different boundary condition [Volume 6, Issue 2, 2016, Pages 295-310]
  • Kamali, R. Elasto-plastic time dependent impact analysis of high speed projectile on water surface [Volume 6, Issue 3, 2016, Pages 281-298]
  • Kamali, R. Numerical simulation and experimental investigation of an underwater high-speed moving body [Volume 7, Issue 1, 2017, Pages 217-230]
  • Kamali, R. Numerical and analytical investigation of shock train in a convergent divergent nozzle [Volume 7, Issue 1, 2017, Pages 101-112]
  • Kami, Abdol V. Assessment of Galling Wear in Automobile Deep Drawing Dies Using Slider-on-Flat-Surface Wear Test [Volume 11, Issue 3, 2021, Pages 151-164]
  • Kamran, M Design of Six-Component Force/Moment Sensor For Cavitation Tunnel [Volume 4, Issue 1, 2014, Pages 131-137]
  • Karafi, M. R. Application of vibration loading method for non-destructive testing of polymer Material by Means of Laser Shear Interferometry [Volume 10, Issue 4, 2021, Pages 15-26]
  • Karamad, H. Study of Primary and Secondary Nonlinear Resonances of Nanobeam Based on Nonlocal Strain Gradient Theory [Volume 10, Issue 2, 2020, Pages 163-175]
  • Karami, M. Numerical investigations of the influence of effective parameters on efficiency of DASC with CuO-H2O nanofluid [Volume 7, Issue 1, 2017, Pages 91-100]
  • Karami, S. Drone Propeller Analysis by Blade Element Momentum and Numerical Methodes for Autonmus Submarine Veichle [Volume 11, Issue 5, 2021, Pages 225-245]
  • Karami, S. The Calculation of Trimaran Vessel Resistance and Uncertainty estimation in Calm water condition by Experimental and Numerical methods [Volume 11, Issue 6, 2022, Pages 253-271]
  • Karami Mohammadi, A. Vibration analysis of pipe conveying fluid, made of functionally graded material in thickness direction [Volume 9, Issue 4, 2019, Pages 107-116]
  • Karami Monfared, Leila Investigation of aspect ratio effect on focusing of Nano-bio particle in viscoelastic fluid [Volume 13, Issue 5, 2023, Pages 187-201]
  • Kargar, H. Identification of crack in beams under moving forces using Hilbert-Huang transform [Volume 11, Issue 6, 2022, Pages 173-185]
  • Kargarsharifabad, H. Experimental Investigation of the Forced Convective Heat Transfer of hybrid Cu / Fe3O4 Nanofluids [Volume 8, Issue 4, 2019, Pages 229-238]
  • Kargarsharifabad, H. Experimental study of the effect of position and intensity of a constant magnetic field on the forced convection heat transfer of Fe2O3 / water nanofluid in the developing thermal region [Volume 11, Issue 1, 2021, Pages 43-58]
  • Karimdoost Yasuri, A. Variations of the contact line kinetics during the evaporation of a water droplet on solid surface [Volume 7, Issue 1, 2017, Pages 301-314]
  • Karimi, D Intelligent Energy Managment Strategy for Parallel Hybrid Hydraulic Vehicle [Volume 2, Issue 4, 2013, Pages 93-103]
  • Karimi, H. Exergy Analysis and Numerical Investigation of the Effects of Nozzle Profile on the Partially-Admitted Supersonic Turbine's Performance [Volume 11, Issue 1, 2021, Pages 169-184]
  • Karimi, K. Elastic-Plastic Modeling of the Residual Stresses Caused by Laser Beam Welding in Aerospace Structures [Volume 5, Issue 2, 2015, Pages 153-162]
  • Karimi, M. The effect of aluminide coating on the creep life of Rene 80 nickel base superalloy [Volume 11, Issue 2, 2021, Pages 145-156]
  • Karimi, Mehdi Workspace of 3-RRR parallel robot using the combination of interval analysis and refinement methods by considering the limitation of active joints movement [Volume 13, Issue 3, 2023, Pages 29-43]
  • Karimi, Peyman Experimental extraction of modulus of elasticity of gastric cancer tissue using cylindrical developed contact mechanics models [Volume 13, Issue 4, 2023, Pages 83-94]
  • Karimian, Saeed Wind Energy potential evaluation and customizing a H-rotor Turbine based on Tehran, Zahedan and Manjil climate [Volume 12, Issue 5, 2022, Pages 267-281]
  • Karimi Ferezghi, B. A Numerical Modeling For Craters Produced By Soil Explosion Using SPH Method [Volume 8, Issue 4, 2019, Pages 53-66]
  • Karimipour, A. Simulation of the Convective Heat Transfer in a Nanofluid Composed of Water and FMWNT Carbon Nanotubes in a Microchannel Subjected to a Magnetic Field in the Slip Flow Regime [Volume 5, Issue 3, 2015, Pages 209-222]
  • Karimipour, Arash A New Models For Dynamic Viscosity of a MWCNTs-EG Nanofluid [Volume 6, Issue 1, 2016, Pages 179-188]
  • Karimipour Fard, P. Study of porous media usage in the performance of tubular heat exchanger in Continuous hydrothermal flow synthesis method [Volume 5, Issue 4, 2016, Pages 177-186]
  • Karimshahian Bidgoli, A.R. Investigation Axisymmetric Aerospike Nozzle [Volume 9, Issue 3, 2019, Pages 177-189]
  • Karkhaneh, Parham Numerical and experimental study of orthogonal cutting bone using elastic-plastic material model and dynamic damage model [Volume 12, Issue 6, 2023, Pages 49-65]
  • Kasaei, M. M. Numerical and Experimental Study on Guillotine Shearing of a Complex Profile Produced by Roll Forming process [Volume 10, Issue 3, 2020, Pages 1-15]
  • Kasaei, M. M. Numerical and experimental investigation of deformation length in flexible roll forming process [Volume 11, Issue 6, 2022, Pages 1-14]
  • Kasaeipoor, A. forced convective heat transfer of cu-water nanofluid over a constant surface temperature wedge [Volume 6, Issue 4, 2016, Pages 343-353]
  • Katebi, A Multi Objective Optimization of a Microturbine and Solid Oxide Fuel Cell (SOFC) Hybrid System [Volume 1, Issue 1, 2011, Pages 47-58]
  • Kaveh, R. Numerical Simulation of Mixing Two Fluids of Different Viscosities in a Micromixer at Different Aspect Ratios of Stirrer by LBM [Volume 9, Issue 1, 2019, Pages 187-202]
  • Kavkar moghadam, E. Investigation of the effect of several impressive parameters on fire extinguishing in a progressive coal tunnel [Volume 12, Issue 4, 2022, Pages 117-131]
  • Kayhani, M.H. Applying ‘SHARP’ Interface Scheme in the Immersed Boundary–Lattice Boltzmann Method [Volume 4, Issue 4, 2015, Pages 157-174]
  • Kazemi, A. Free vibration and static deflection of a micro-plate with piezoelectric layers using modified couple stress theory [Volume 7, Issue 4, 2018, Pages 25-34]
  • Kazemi, Sayyed R. The effect of horizon size and projectile shape on the crack growth in the cracked beam using peridynamic method [Volume 8, Issue 4, 2019, Pages 39-51]
  • Kazemi, Sayyed Roohollah Investigation of sound transmission in composite rectangular panels under the incidence wave with two various angles [Volume 13, Issue 2, 2023, Pages 41-54]
  • Kazemi, Z. Natural Frequency Optimization of 2D and 3D Truss Structures Using a Discrete Sensitivity Analysis [Volume 6, Issue 4, 2016, Pages 23-40]
  • Kazemian, A. H. Developing a statistical model based on Markov chain for fatigue life prediction of double lap composite adhesive joints [Volume 12, Issue 4, 2022, Pages 91-102]
  • Kazemian, M. E. Performance optimization of organic Rankin cycle (ORC) based on comparative study of Box –Behnken and central Composite design methods [Volume 11, Issue 2, 2021, Pages 219-232]
  • Kazemi Nasrabadi, M. Investigation of Shear Strength of the Bonding Region for Dissimilar Aluminum Alloy Sheets in Friction Stir Spot Welding Process [Volume 9, Issue 1, 2019, Pages 125-138]
  • Kazemi Nasrabdi, M. Experimental study on the effect of Friction Stir Spot Welding process parameters on the shear strength of created joints in AA7075-T6 [Volume 7, Issue 3, 2017, Pages 53-66]
  • Kazemnadi, Saeid Numerical Analysis of Hot Deep Drawing Process of Thick Steel Sheet without Using Blank Holder with Tractrix and Pseudo Tractrix Dies [Volume 13, Issue 2, 2023, Pages 69-87]
  • Kazemzadeh Parsi, M.J. Frequency Analysis of Bi-directional Porous Functionally Graded Beams with Variable cross section on Elastic Foundation using Reddy Third Order Shear Deformation Theory [Volume 11, Issue 3, 2021, Pages 97-118]
  • Keighobadi, J. Adaptive Fuzzy Control of an Electrical Single-Wheel Robot [Volume 5, Issue 1, 2015, Pages 61-75]
  • Keramat, A. Waterhammer caused by intermittent and simultaneously pump failure in pipe systems including series pump groups [Volume 4, Issue 4, 2015, Pages 207-221]
  • Kermani, M. J. Analysis of Surface Roughness Effects on the Performance of a Gas Turbine Stage [Volume 6, Issue 2, 2016, Pages 197-212]
  • Keshavarz, Maryam Heat transfer enhancement in a microchannel using active vibrating piezoelectric vortex generator [Volume 12, Issue 6, 2023, Pages 191-204]
  • Keshavarz valian, A. Numerical analysis of heat transfer in turbulent reciprocating flow in Stirling engine heat exchanger [Volume 5, Issue 4, 2016, Pages 187-200]
  • Keshtegar, B. Novel mathematical models based on regression analysis scheme for optimum tuning of TMD parameters [Volume 6, Issue 4, 2016, Pages 59-75]
  • Keyfarikheybari, A. An analytical solution for asymmetric non-Fourier heat conduction in a long solid orthotropic cylinder [Volume 9, Issue 3, 2019, Pages 95-108]
  • Keyhani, M. H Hydrodynamic and Thermal Boundary Layers of a Fluid over a Stretching Flat Plate in a Porous Medium using Thermal Non-Equilibrium Model: Similarity Solution [Volume 2, Issue 1, 2012, Pages 47-55]
  • Keyhani Yazdi, M. Theoretical and experimental analysis of jamming of workpiece in the fixture by using the block and palm study [Volume 10, Issue 2, 2020, Pages 45-58]
  • Keymasi Khalaji, A. Robust adaptive controller Design for an autonomous robot with time-varying dynamics [Volume 7, Issue 4, 2018, Pages 147-158]
  • Khadem, J. Investigation of Internal Flow of Binary Gas in a Rotating Cylinder Using Direct Simulation Monte-Carlo (DSMC) [Volume 5, Issue 2, 2015, Pages 261-270]
  • Khadem, Javad Experimental analysis of the performance of a bidirectional single-unit air compressor with a semi-gear and rack mechanism in power transmission [Volume 13, Issue 2, 2023, Pages 129-142]
  • Khadem, Sayyed A. Noise Analysis & Flow Simulation in Angle Globe Valve with Different Cages [Volume 8, Issue 4, 2019, Pages 261-271]
  • Khajvand, F. Hydraulic Hybrid Propulsion System Design and Simulation [Volume 12, Issue 2, 2022, Pages 1-12]
  • Khaki, R. Numerical Study of Slot Lip Effects on Aerodynamics Performance of a Two-Element Airfoil with the Approach of Decreasing the Landing Distance [Volume 13, Issue 1, 2023, Pages 99-109]
  • Khaki Jamei, M. Numerical investigation of nano-fluid flow on micro channel heat sink efficiency using the Taguchi method [Volume 7, Issue 1, 2017, Pages 275-287]
  • Khaledi, H. Experimental Investigation of High-velocity Impact Effects on Composite Sandwich Panel with M-Type Lattice Core Made of Carbon Fiber Reinforced by Nano-SiO2 [Volume 11, Issue 6, 2022, Pages 127-142]
  • Khaledi, H. Experimental and numerical investigation on mechanical properties of bending and compressive behaviour of carbon-epoxy sandwich panel with novel M-shaped core [Volume 12, Issue 1, 2022, Pages 67-84]
  • Khaleghi, A. Modification of k-e-v 2 Turbulence Model for Turbulent Accelerated Flows in Pipes [Volume 7, Issue 2, 2017, Pages 215-228]
  • Khaleghi, A. experimentally study of thermal resistance coefficient in closed loop pulsating heat pipe and the effect of filling ratio and evaporator to condenser length ratio on it [Volume 12, Issue 4, 2022, Pages 175-187]
  • Khaleghi, H. Development of a suitable numerical solution algorithm for the two-phase Euler-Lagrange approach with four way coupling in spray simulation [Volume 12, Issue 4, 2022, Pages 133-144]
  • Khaliji Oskuei, M. H. Experimental investigation and estimation of thermal conductivity and contact conductance of granular activated carbon packed bed as a function of density [Volume 10, Issue 2, 2020, Pages 193-204]
  • Khalilarya, Sh. Energy and exergy analyses of various configures for combined flash-binary cycles using Sabalan geothermal wells [Volume 9, Issue 4, 2019, Pages 237-249]
  • Khalili, A. Thermal Performance Modeling of Liquid in Evaporator with Spherical Microstructures and Conical Micropillars [Volume 6, Issue 4, 2016, Pages 193-204]
  • Khalili, K. Calculation Diffusion Coefficient of Drying Clay Ceramics Using Firefly Algorithm With Study the Effects of Part Geometry [Volume 5, Issue 4, 2016, Pages 55-67]
  • Khalili, Kh Experimental study of crack during ceramic drying and compare with the finite element [Volume 4, Issue 1, 2014, Pages 119-129]
  • Khalili, Kh. Improving the Accuracy of Crack Length Measurement in Clay Brick Using Machine Vision [Volume 5, Issue 2, 2015, Pages 111-122]
  • Khalili, Kh. Using of Machine Vision System for Offline Setup Cast parts on CNC Milling Machine with Industrial Application Approach [Volume 11, Issue 1, 2021, Pages 239-255]
  • Khalili, Kh. Feasibility of Aluminum-Copper Bimetallic Bar Production by Combined Equal Channel Angular Pressing and Direct Extrusion Process [Volume 11, Issue 2, 2021, Pages 193-207]
  • Khalili, Kh. Comparison the Performance of Rajagopal Musculoskeletal Model and its Updated Versions in Prediction of the Knee Joint Contact Forces During Walking and Squatting [Volume 11, Issue 5, 2021, Pages 83-94]
  • Khalili, M. Prediction of chatter phenomenon in the internal turning process using the results of experimental tests and artificial neural network [Volume 10, Issue 3, 2020, Pages 121-133]
  • Khalili, M. A. Dynamic Response of Curved Sandwich Beam with a Soft Flexible Core Subjected to Radial Low Velocity Impact [Volume 5, Issue 1, 2015, Pages 13-29]
  • Khalili, S. M. R. Bending analysis of sandwich and laminated composite plates containing piezoelectric layers by improved global-local theory [Volume 6, Issue 2, 2016, Pages 121-137]
  • Khalili, S.M.R. Experimental investigation of repeated low velocity impact on GLARE with various energy levels [Volume 5, Issue 2, 2015, Pages 43-56]
  • Khalkhali, A. Analysis of torsional and bending stiffness of a sedan vehicle using simplified Finite element model [Volume 7, Issue 2, 2017, Pages 17-26]
  • Khalkhali, A. Numerical simulation and optimization of truck’s cabin strength [Volume 11, Issue 4, 2021, Pages 15-31]
  • Khalkhali, ِA. Analysis of the blade thickness distribution effects on the turbocharger turbine performance at full and partial admission condition [Volume 10, Issue 1, 2020, Pages 297-311]
  • Khalkhali, Abolfazl Side panel of B-Class body in white vehicle design and side crash finite element simulation [Volume 5, Issue 3, 2015, Pages 51-64]
  • Khamisi, Sh. Effect of Air-Fuel Equivalence Ratio on Combustion Process in Furnace of Razi Petrochemical Company’s Ammonia Unit [Volume 11, Issue 5, 2021, Pages 119-132]
  • Khandaei, M. Presenting a new method for evaluating friction effects at extrusion die entrance based on combination of the open die backward extrusion and ring compression tests [Volume 11, Issue 1, 2021, Pages 73-88]
  • Khanlari, R. Investigation of the effect of nanoparticles on cryosurgery using non-Fourier heat transfer model [Volume 7, Issue 1, 2017, Pages 205-216]
  • Khanmohammadi, M. Life prediction of reinforced Glass-Epoxy and Graphite-Epoxy polymers subjected to various loading conditions [Volume 6, Issue 1, 2016, Pages 153-165]
  • Kharati-Koopaee, Masoud Six Degree of Freedom Simulation of Variable Mass Autonomous Underwater Vehicle [Volume 4, Issue 4, 2015, Pages 33-44]
  • Khatibi, M. Numerical study of the effects of aluminum particle additives in adsorbent bed on the performance of adsorption refrigeration systems [Volume 8, Issue 3, 2018, Pages 261-275]
  • Khatibi, M.M. Indirect Damage detection in bridge using transmissibility measurements from the response of a passing vehicle [Volume 9, Issue 4, 2019, Pages 59-76]
  • Khazaee, M Changing the dynamics of a system by using finite duration inputs: Application to cancer modeling and treatment [Volume 4, Issue 1, 2014, Pages 79-91]
  • Khazaeeneghad, A. Effect of Environmental Conditions on Solar Chimney:Exergy and Economic Analysis and Choosing the Appropriate City [Volume 11, Issue 1, 2021, Pages 351-364]
  • Kheiri, R. Modeling and evaluation of the flow regime effects on fluid movement into three-dimensional channel with porous wall [Volume 10, Issue 3, 2020, Pages 265-280]
  • Khishe, S. Improving the Accuracy of Crack Length Measurement in Clay Brick Using Machine Vision [Volume 5, Issue 2, 2015, Pages 111-122]
  • Khodarahmi, H. Investigation of Axial and Oblique Crushing of Empty and Foam-Filled Conical Tubes under Clamped Boundary Condition [Volume 6, Issue 4, 2016, Pages 139-159]
  • Khodarahmi, H. Experimental and numerical study of core and face-sheet thickness effects in sandwich panels with foam core and aluminum face-sheets subjected to blast loading [Volume 8, Issue 3, 2018, Pages 91-106]
  • Khodarahmi, H. Experimental and Numerical Study of Deformation of FML Plates with the Same Thickness Under Explosive Loading [Volume 8, Issue 4, 2019, Pages 129-142]
  • Khodarahmi, H. Experimental investigation of large plastic deformation of single- and multi-layered circular aluminum plates under repeated uniform impulsive loading [Volume 11, Issue 1, 2021, Pages 123-137]
  • Khodarahmi, H. Experimental and numerical evaluation of energy absorption capacity of sandwich panel with polyurethane foam core reinforced with mineral pumice under explosive loading [Volume 12, Issue 4, 2022, Pages 27-40]
  • Khodarahmi, Hossein Presenting an analytical model based on the energy method to study the plastic deformation of circular plates under uniformly repeated blast loading [Volume 12, Issue 3, 2022, Pages 33-43]
  • Khojastehpour, M. Modelling and optimizing effect of start of injection and blend of fuels on dual fuel diesel engine performance parameters by ANN and NSGA II [Volume 10, Issue 3, 2020, Pages 61-75]
  • Khondabi, R. Experimental and numerical study of core and face-sheet thickness effects in sandwich panels with foam core and aluminum face-sheets subjected to blast loading [Volume 8, Issue 3, 2018, Pages 91-106]
  • Khooban, M. H Six Degree of Freedom Simulation of Variable Mass Autonomous Underwater Vehicle [Volume 4, Issue 4, 2015, Pages 33-44]
  • Khooban, Mohammad Hassan Optimal Intelligent Control for Glucose Regulation [Volume 2, Issue 3, 2012, Pages 71-79]
  • Khoramishad, H. Numerical Investigation of the Effects of Material and Number of Metal Layers on Low-Velocity Impact Response of Metal Laminates [Volume 11, Issue 4, 2021, Pages 1-14]
  • Khorasani, R. Experimental investigation of vibrational-damping properties of a viscoelastic material [Volume 6, Issue 4, 2016, Pages 161-171]
  • Khorashadizadeh, S. Adaptive fuzzy sliding mode control of a robotic manipulator in task-space using voltage control strategy [Volume 5, Issue 3, 2015, Pages 17-26]
  • Khormpoor, N. Investigation and Analysis Effect of Environment Conditions on Cost Function, Energy and Exergy Efficiency of a Solar Tower (6MW) in Several Cities of Iran [Volume 10, Issue 4, 2021, Pages 373-386]
  • Khormpoor, S. Investigation and Analysis Effect of Environment Conditions on Cost Function, Energy and Exergy Efficiency of a Solar Tower (6MW) in Several Cities of Iran [Volume 10, Issue 4, 2021, Pages 373-386]
  • Khormpoor, S. Thermoeconomic optimization and investigation of condensation effect on Shell & Tube condenser in the presence of non-condensable gases with a new approach [Volume 12, Issue 1, 2022, Pages 159-173]
  • Khorram, A. Investigation of metallurgical and mechanical properties of TIG welded parts for material replacement [Volume 7, Issue 4, 2018, Pages 87-95]
  • Khorram, A. Investigation of the process parameter effects on the hole geometry characteristics in laser drilling of Hastelloy X superalloy [Volume 9, Issue 1, 2019, Pages 45-54]
  • Khorram, A. Investigation on the effect of laser cladding parameters on the geometrical characteristics and microhardness of 17-4 steel [Volume 11, Issue 2, 2021, Pages 133-143]
  • Khorram, A. The effect of interlayer on the microstructural characteristic and mechanical properties of diffusion welding between 17-4PH steel and Ti6Al4V alloy [Volume 12, Issue 3, 2022, Pages 45-56]
  • Khorram, A. The effect of diffusion welding parameters on the microstructural characteristics and mechanical properties of dissimilar joint between 17-4PH steel and Ti6Al4V alloy using nickel interlayer [Volume 12, Issue 4, 2022, Pages 41-54]
  • Khorramabadi, R. Effects of initial twist on buckling and frequency response of SMA tubes [Volume 7, Issue 3, 2017, Pages 17-28]
  • Khorramabadi, R. Vibration of buckled composite plates with embedded heat treated SMA wires [Volume 10, Issue 1, 2020, Pages 93-106]
  • Khorshidi, J. Numerical and Experimental Investigation into Heat Transfer Process in a Fluidized Bed of Alumina Powder [Volume 6, Issue 4, 2016, Pages 263-274]
  • Khorshidi, K. Vibration and stability analysis of laminated composite plates with hygrothermal effect [Volume 6, Issue 2, 2016, Pages 155-166]
  • Khorshidi, K. The study of the effects of thermal environment on Free Vibration analysis of two-dimensional Functionally Graded Rectangular plates on Pasternak elastic foundation [Volume 6, Issue 3, 2016, Pages 137-147]
  • Khorshidi, K. Exact free vibration analysis of sector plates coupled with piezoelectric layers using first-order shear deformation plate theory [Volume 6, Issue 4, 2016, Pages 125-138]
  • Khorshidi, K. Buckling analysis of functionally graded rectangular microplate in thermal environment based on exponential shear deformation theory using the modified couple stress theory [Volume 8, Issue 4, 2019, Pages 179-196]
  • Khorshidi, K. Solution of the Characteristic Frequency Equations of Levy-type Sandwich Panels with Auxetic Honeycomb Core based on the Improved Reddy’s Third-order Theory [Volume 11, Issue 1, 2021, Pages 291-310]
  • Khoshdel, V. Robust Impedance Control of a Lower-Limb Rehabilitation Robot Using Fuzzy Parameters [Volume 5, Issue 4, 2016, Pages 83-95]
  • Khoshkhoo, R. Numerical Study of Dielectric Barrier Discharge (DBD) Plasma Actuators on Separation Control of Supersonic Flow [Volume 11, Issue 4, 2021, Pages 133-148]
  • Khoshkhoo, R.H. Calculation of Stiffness and Stresses Due to Misalignment in Multiple Diaphragm Couplings Using Analytical Method [Volume 6, Issue 2, 2016, Pages 139-154]
  • Khoshnevis, A. B. Experimental Investigation of Effects of Split Blended Winglet at Tip Vortex Structure of Micro-Aerial Vehicle with Hot-Wire Anemometry [Volume 8, Issue 2, 2018, Pages 193-204]
  • Khoshnood, Abdol M. A recursive algorithm to exploit a multiple-arm space manipulator equations of motion by the Lagrange method in terms of quasi-coordinates [Volume 9, Issue 4, 2019, Pages 15-26]
  • Khoshnood, Abdol M. Investigation on the tank vehicle dynamic performance influenced by fluid sloshing using multidisciplinary simulation technique [Volume 8, Issue 1, 2018, Pages 183-202]
  • Khoshnood, Abdol M. Dynamic Modeling and Controller Design for a Space Vehicle with Fuel Sloshing [Volume 11, Issue 2, 2021, Pages 25-40]
  • Khoshnood, Abdolmajid Distributed Coverage Control of a Multi Agent System in a Disaster Area and Localizing the Stationary Probable Targets in the Environment [Volume 12, Issue 1, 2022, Pages 1-20]
  • Khoshnood, Abdolmajid Fusion of inertial measurement system and visual navigation for unmanned aerial vehicles using Hardware in the Loop simulation [Volume 12, Issue 5, 2022, Pages 31-46]
  • Khoshnood, A. M L1 adaptive controller design of a space system considering structural flexibility [Volume 6, Issue 2, 2016, Pages 17-27]
  • Khosh sima, B. Experimental determination of the effect of titanium nanoalloy on mechanical properties of girth welding on Iranian natural gas transmission pipelines [Volume 8, Issue 3, 2018, Pages 213-219]
  • Khoshvaght-Aliabadi, M. Improvement of hydrothermal performance of microchannel heat sinks using V-shape pin-fins and Al2O3 / water nanofluid [Volume 8, Issue 4, 2019, Pages 211-228]
  • Khoshvaght-Aliabadi, M. Modelling and Optimization of Geometrical Parameters in Design of the Wavy-Fin-Plate Compact Heat Exchanger by Taguchi method [Volume 12, Issue 3, 2022, Pages 89-101]
  • Khosravi, H. Experimental Analysis of the Strain Effect on the Anisotropic Coefficients of 6061 Aluminum Sheet Using Digital Image Processing [Volume 6, Issue 1, 2016, Pages 73-84]
  • Khosravi, M. Investigation of parameters affecting the roughness and cylindricality of holes in PLA parts made of 3D printing by fused deposition modeling process using response surface method [Volume 11, Issue 3, 2021, Pages 119-133]
  • Khosravi, Mohammad Experimental comparison of microstructure and surface properties of Al / Al2O3 sample produced by powder metallurgy and spark plasma sintering methods [Volume 12, Issue 5, 2022, Pages 123-132]
  • Khosravi, Saman Numerical simulation of heat transfer in a parabolic solar coleector absorber tube using two-phase method [Volume 13, Issue 3, 2023, Pages 115-127]
  • Khosravifard, A. Analysis of plates under the application of moving concentrated loads using a meshfree method with adaptive re-arrangement of nodes [Volume 8, Issue 4, 2019, Pages 11-25]
  • Khosravi Khor, H. Experimental measurement of fracture energy of API X65 steel using drop weight tear test equipped with accelerometer [Volume 11, Issue 1, 2021, Pages 89-96]
  • Kia, Farhad Simulation and Optimizations of Truck’s Cabin Structure Exposed to Explosion [Volume 12, Issue 5, 2022, Pages 109-122]
  • Kiani, A. Numerical analysis of a new specimen for conducting fracture experiments under mixed mode I/III loading [Volume 8, Issue 3, 2018, Pages 247-259]
  • Kiani, A. Numerical Investigation of Oscillations of Flexible Stabilizer Attached to Forced Vibrated Body via Fluid-Structure Interaction Simulation [Volume 9, Issue 2, 2019, Pages 47-59]
  • Kiani, M. Numerical investigation of temperature field and laminar flame structure of inclined impinging jets of methane and hydrogen [Volume 9, Issue 4, 2019, Pages 251-261]
  • Kianifar, A. Experimental Investigation of Indoor Cooking Using an Indirect Solar Cooker Integrated with Heat Storage Materials [Volume 11, Issue 3, 2021, Pages 207-219]
  • Kiarasi, F. Detection of Single and Multiple Cracks in Circular Cylindrical Shells Using Modal Analysis and Wavelet Transform [Volume 12, Issue 2, 2022, Pages 13-28]
  • Kolahchi, Reza Buckling of an embedded piezoelectric nanobeam based on strain gradient and Reddy beam theories [Volume 4, Issue 3, 2014, Pages 23-33]
  • Kolahdooz, A. Flow Field Analysis of a Synthetic Jet in the Presence of a Crossflow: Application of Different Turbulence Models [Volume 8, Issue 4, 2019, Pages 197-210]
  • Koochakianfard, O. Vibration of rotating microbeams with axial motion in complex environments [Volume 12, Issue 4, 2022, Pages 1-12]
  • Korkzan, S. Shear Behavior Analysis of Steel Plate Girders with Local Corrugated Web under Monotonic Loading [Volume 8, Issue 3, 2018, Pages 77-90]
  • Kosmasi, M. Numerical simulation of ultra high performance fibre reinforced concrete panels subjected to underwater blast loading [Volume 7, Issue 3, 2017, Pages 149-163]

L

  • Lakhi, M. Investigation of parameters affecting the roughness and cylindricality of holes in PLA parts made of 3D printing by fused deposition modeling process using response surface method [Volume 11, Issue 3, 2021, Pages 119-133]
  • Lari, H.R. Finite element modeling of debonding behavior of the adhesively bonded joints between sandwich panel and pultruded profile in flexural loading [Volume 6, Issue 1, 2016, Pages 107-116]
  • Lashkarara, B. Waterhammer caused by intermittent and simultaneously pump failure in pipe systems including series pump groups [Volume 4, Issue 4, 2015, Pages 207-221]
  • Lashkarblook, M. Numerical calculation of the shear stresses in torsion problem of prismatic bars using collocated discrete least squares method [Volume 5, Issue 4, 2016, Pages 47-54]
  • Letafati, H. Vibration Energy Harvesting Using Bimorph Piezoelectric Cantilever [Volume 7, Issue 1, 2017, Pages 1-9]
  • Lexian, H. Calculation of Stiffness and Stresses Due to Misalignment in Multiple Diaphragm Couplings Using Analytical Method [Volume 6, Issue 2, 2016, Pages 139-154]
  • Liaghat, Gh.H. Investigating on the energy absorption of PA/GF6 thermoplastic composite produced by hot pressing method under low-velocity impact test [Volume 13, Issue 1, 2023, Pages 1-13]
  • Liaghat, Gholamhosein Experimental and numerical analysis of the effect of using two perforated plates in front of the target against ballistic impact [Volume 12, Issue 5, 2022, Pages 175-187]
  • Livani, M. The effect of aluminide coating on the creep life of Rene 80 nickel base superalloy [Volume 11, Issue 2, 2021, Pages 145-156]
  • Loghman, A. Electro–Magneto–Thermo-Mechanical Analysis of polymeric Smart Rotating Disk Reinforced WithMultiwalled Carbon Nanotubes with Nonlinear Behavior [Volume 6, Issue 2, 2016, Pages 97-108]
  • Loghman, A. Analysis of functionally graded beams with variable thickness using first-order shear deformation theory subjected to mechanical and thermal loads [Volume 10, Issue 1, 2020, Pages 65-76]
  • Lotfi, M. Design, fabrication and modeling of a new solar still desalination system and evaluation of its performance [Volume 8, Issue 2, 2018, Pages 205-220]
  • Lotf Khodaei, B. Design optimization of 2D continuum structures using an efficient simulated annealing algorithm [Volume 6, Issue 4, 2016, Pages 41-48]

M

  • Maadi, Seyed R. Numerical and Experimental Investigation of Entropy Generation in a Supersonic Air Intake at Design Mach number [Volume 9, Issue 1, 2019, Pages 139-152]
  • Maddahian, R. Development of a suitable numerical solution algorithm for the two-phase Euler-Lagrange approach with four way coupling in spray simulation [Volume 12, Issue 4, 2022, Pages 133-144]
  • Madoliat, R. Solving the inverse problem of identification of FE model parameters of a non-uniform beam using genetic algorithms [Volume 5, Issue 1, 2015, Pages 39-48]
  • Madoliat, R. Application of elastic support assumption for accuracy improvement of crack detection in beams using firefly algorithm [Volume 5, Issue 4, 2016, Pages 105-115]
  • Maerefat, M. Influence of air inlet diffuser layout on indoor air quality and occupants’ thermal comfort in a room with baseboard heating system [Volume 6, Issue 3, 2016, Pages 261-270]
  • Maghrebi, M. j. Investigation of flow field and torque coefficient of Darrieus wind turbine with respect to pitch angle variations and tip speed ratios [Volume 6, Issue 4, 2016, Pages 173-191]
  • Maghrebi, M. J. Performance improvement of hybrid Darrieus-Savonius wind turbine [Volume 6, Issue 3, 2016, Pages 195-212]
  • Maghrebi, M. J. Investigation of Wave Characteristics and Wave Resistance of an Underwater vehicle with Control Surface Near the Free Surface [Volume 12, Issue 2, 2022, Pages 65-79]
  • Maghrebi, M.J. Numerical Investigation of Installed Rod Effects in Front of an ASymmetric Blade section of Vertical Axis Wind Trubine [Volume 11, Issue 4, 2021, Pages 107-120]
  • Maghrebi, M.J. Effect of Plate Numbers on Optimal Condition of Gasket Heat Exchanger with Graphene-Carbon Nanotube Hybrid [Volume 11, Issue 5, 2021, Pages 149-163]
  • Maghrebi, Mohammad Javad Thermo-Hydrodynamic Analysis of Duct Flow using Lattice Boltzmann Method [Volume 1, Issue 2, 2011, Pages 81-90]
  • Maghrebi, Mohammad Javad On the natural convective heat transfer from a cold horizontal cylinder over an adiabatic surface [Volume 2, Issue 3, 2012, Pages 19-28]
  • Maghrebi, Mohammad Jawad Improvement aerodynamic performance of a wind turbine using injecting air jet and Taguchi optimization. [Volume 12, Issue 5, 2022, Pages 215-235]
  • Maghsoodi, R. Channels Flow Modeling by Using Isogeometric Analysis [Volume 5, Issue 4, 2016, Pages 15-26]
  • Maghsoudi, I. Numerical Comparison of Mechanical Vanes and Blowing Jet Flow Control Effects In a Diffusing Curved Duct [Volume 7, Issue 1, 2017, Pages 231-254]
  • Maghsoudi, P. Using net present value as a single objective function for thermo-economic optimization of a plate-fin recuperator in microturbine [Volume 6, Issue 3, 2016, Pages 213-226]
  • Maghsoudpour, َA. Free nonlinear vibration analyzing of annular sector plate in contact with fluid [Volume 11, Issue 2, 2021, Pages 73-86]
  • Mahaki, M. B. Numerical Simulation and Visualization of Gas-Metal Powder Flow in Laser Cladding Process [Volume 11, Issue 5, 2021, Pages 183-197]
  • Mahboubi Fooladi, M. R. Numerical Simulation of steady and unsteady natural convection heat transfer of nanofluids in eccentric and concentric porous annuluses [Volume 9, Issue 4, 2019, Pages 117-136]
  • Mahdavi, A. M. A NEW HYBRID FOKKER-PLANCK-DSMC APPROACH FOR MODELING RAREFIED GAS IN CONVERGANT-DIVERGANT NOZZLE WITH PLUME [Volume 10, Issue 4, 2021, Pages 331-343]
  • Mahdavi, Arash Investigating the performance of a solar still coupled with a semitransparent photovoltaic module under various wind speed conditions [Volume 13, Issue 4, 2023, Pages 135-146]
  • Mahdavi, M. 3D Reconstruction of Carbon Nanotube Composite Using Statistical Correlation Functions [Volume 6, Issue 3, 2016, Pages 33-42]
  • Mahdavi, M. Experimental investigation of the jamming phenomenon in fixturing of workpiece using the peg-in-hole mechanism [Volume 10, Issue 3, 2020, Pages 77-89]
  • Mahdavi, Seyyed A. Numerical simulation and optimization of truck’s cabin strength [Volume 11, Issue 4, 2021, Pages 15-31]
  • Mahdavi, Seyyed Askari Simulation and Optimizations of Truck’s Cabin Structure Exposed to Explosion [Volume 12, Issue 5, 2022, Pages 109-122]
  • Mahdavi Keshavar, O. Study and Investigation of Secondary Sedimentation Tank Equipped with Lamella using Discrete Phase Model (DPM) [Volume 9, Issue 1, 2019, Pages 173-186]
  • Mahdavi Keshavar, Omid Investigating, Simulating and Applying Geometric Scaling Effects in the Prediction and Calculation of Aerodynamic Coefficients from Wind Tunnel to Real Scale [Volume 13, Issue 5, 2023, Pages 1-17]
  • Mahdavikhah, M. Numerical modeling of adsorption desalination and investigation evaporator pipe lenght effect on desalinated water [Volume 12, Issue 4, 2022, Pages 145-157]
  • Mahdi, M. Numerical investigation of sensitivity of AUV dynamic coefficients and added mass to variations in amplitude and frequency of excitation [Volume 10, Issue 4, 2021, Pages 195-208]
  • Mahdian, A. The impact analysis on airfield matting plate with considering the aircraft tyre deflection [Volume 8, Issue 2, 2018, Pages 69-79]
  • Mahdian, A. Thickness optimization of the airplane wing box components by the design of experiments method [Volume 13, Issue 1, 2023, Pages 43-56]
  • Mahdiyar, N. Investigation of the Effect of Crystallographic Orientation and Non-Rigid Tool on Nickel Hardness in Nanoindentation Process using Molecular Dynamics Simulation [Volume 11, Issue 1, 2021, Pages 213-226]
  • Mahdizadeh Rokhi, M. Crack analysis in diffusion-generalized thermoelasticity problems using the extended finite element method [Volume 11, Issue 5, 2021, Pages 63-82]
  • Mahdizadeh Rokhi, Masoud Study of Dynamic Fracture of Functionally Graded Materials under Thermo-mechanical Shocks [Volume 1, Issue 3, 2012, Pages 1-16]
  • Mahjoubmoghadas, S. Investigation effect of wetted surface of cylindrical shell on vibrational frequency in different immersion depth numerically and experimentally [Volume 11, Issue 6, 2022, Pages 97-109]
  • Mahmodzade Hoseyni, S.A. Evaluation of optimal parameters affecting of isotropic plates with polygonal cutout under shear load using particle swarm algorithm [Volume 6, Issue 2, 2016, Pages 29-40]
  • Mahmoodabadi, F. Combination of Meshless Local Petrov-Galerkin and Finite Difference Methods for Analysis of Transient and Incompressible Navier–Stokes Equations [Volume 10, Issue 4, 2021, Pages 209-223]
  • Mahmoodabadi, M. J. Combination of Meshless Local Petrov-Galerkin and Finite Difference Methods for Analysis of Transient and Incompressible Navier–Stokes Equations [Volume 10, Issue 4, 2021, Pages 209-223]
  • Mahmoodi, A. Optimization of Shazand Arak power plant boiler rifled tubes using genetic algorithm [Volume 6, Issue 3, 2016, Pages 227-237]
  • Mahmoodi, M. Numerical Comparison of Mechanical Vanes and Blowing Jet Flow Control Effects In a Diffusing Curved Duct [Volume 7, Issue 1, 2017, Pages 231-254]
  • Mahmoodi, M. Simulation of baffle effects on sloshing in model aircraft fuel tank [Volume 9, Issue 2, 2019, Pages 275-287]
  • Mahmoodi, Mohammad Javad Multi-scale Electrochemical-mechanical Modeling of Fast Response of Ionic Polymer-Metal Composite Actuator [Volume 13, Issue 6, 2024, Pages 31-46]
  • Mahmoodi, Mostafa Investigation of the Effect of Noise Parameters of Jet Using Acoustic Load Calculation Algorithm on the Launch Vehicle During Lift-Off [Volume 13, Issue 3, 2023, Pages 17-27]
  • Mahmoudi, Mussa Evaluation of the Vertical Vibration Period Uue to Column Elimination and Its Effects on Structural Response Due to Progressive Collapse [Volume 4, Issue 3, 2014, Pages 35-43]
  • Mahmoudi Nasab, Ardeshir An experimental investigation on the influence of geometrical configuration of copper patches on mechanical strength of cracked titanium components using diffusion method [Volume 13, Issue 3, 2023, Pages 85-96]
  • Mahmoudkhani, S. Flutter analysis of the panel treated with integrated and segmented constrained layer damping [Volume 11, Issue 3, 2021, Pages 245-261]
  • Mahmoudkhani, S. Investigating the performance of the damped vibration absorber made of a three-layer beam with a viscoelastic core [Volume 11, Issue 5, 2021, Pages 1-16]
  • Mahmoudkhani, Saeed Effects of the rigid disk attached to the edges of the cylindrical shells on the natural frequencies of different modes [Volume 13, Issue 4, 2023, Pages 15-37]
  • Mahpeykar, Mohammad Reza Evaluation of different nucleation models and droplet radius averaging methods and their combination on condensing steam flow [Volume 5, Issue 1, 2015, Pages 193-209]
  • Mahpeykar, M. R. Evaluate the Performance of the Scalar and Cusp Central Difference Schemes, AUSM+ Upwind Method in Very Low Mach Number up to Supersonic Flow [Volume 6, Issue 1, 2016, Pages 225-237]
  • Mahpeykar, M.R. Using of AUSM+ Method for Improving the Results and Reducing Numerical Eror of Jameson's 2D Finite Volume Technique in Turbine Stator Blades [Volume 5, Issue 4, 2016, Pages 201-212]
  • Mahzoon, M. Dynamic Analysis of Autofrettage under Transient Loading in FG Thick-Walled Cylinder with Work Hardening Behavior Using Numerical Method [Volume 9, Issue 1, 2019, Pages 27-43]
  • Majd, Ali Investigation of Non Newtonian fluid effects in unsteady flow of pipe system [Volume 5, Issue 1, 2015, Pages 211-219]
  • Majidi, H.R. Fracture prediction of key-hole notched graphite plates by using the strain energy density based on the equivalent factor concept [Volume 7, Issue 2, 2017, Pages 1-15]
  • Majidi, S. Shape Optimization of Preform Dies in two-stage Near Net Forging [Volume 4, Issue 4, 2015, Pages 65-73]
  • Majidi- Jirandehi, Ali Akbar Determination of energy-notch depth relationship using force-displacement diagrams in instrumented Charpy impact testing of API X65 steel [Volume 12, Issue 6, 2023, Pages 149-162]
  • Majidi Rod, A. H. Effect of welding residual stress on natural frequencies using experimental and numerical analysis [Volume 6, Issue 4, 2016, Pages 91-101]
  • Makvandi, H. Study on Free Vibration of Buckled Cracked Plates Using Differential Quadrature Element Method [Volume 8, Issue 4, 2019, Pages 67-83]
  • Malahmadi, Jamshid Forced convection heat transfer and hydrodynamic behavior of CuO/water nanofluid in rotational concentric annuli [Volume 3, Issue 3, 2013, Pages 121-136]
  • Maleka Ashtiani, I. Analytical and numerical investigation of fluid flow instability in porous media with the Forchheimer coefficient impact [Volume 7, Issue 4, 2018, Pages 97-104]
  • Maleki, Ali Numerical Investigation of Bending Angle and Entropy Generation in Laser Forming of High Strength Steel [Volume 9, Issue 4, 2019, Pages 151-166]
  • Maleki, H. M. One-Dimensional Design of Centrifugal Compressor of a Turo-shaft Engine with Optimization of 90-Degree Bend Duct between Radial and Axial Diffuser [Volume 5, Issue 3, 2015, Pages 65-77]
  • Maleki, S. Investigation of nonlinear pull-in phenomena in functionally graded micro-beams under electrostatic excitation [Volume 8, Issue 3, 2018, Pages 137-151]
  • Maleki, S. Study of Primary and Secondary Nonlinear Resonances of Nanobeam Based on Nonlocal Strain Gradient Theory [Volume 10, Issue 2, 2020, Pages 163-175]
  • Malekzade Fard, K. Free vibration analysis of functionally graded beam with transverse crack using Timoshenko and higher order shear deformation theory [Volume 11, Issue 1, 2021, Pages 275-289]
  • Malekzadeh, M. Robust adaptive control of the spacecraft formation flying in elliptical orbit with high eccentricity [Volume 7, Issue 3, 2017, Pages 83-96]
  • Malekzadeh Fard, K. Dynamic Response of Curved Sandwich Beam with a Soft Flexible Core Subjected to Radial Low Velocity Impact [Volume 5, Issue 1, 2015, Pages 13-29]
  • Malekzadeh Fard, K. Experimental Investigation and Optimization of Bi-Layered Tube Hydroforming Process Parameters with Particle Swarm Optimization Algorithm [Volume 7, Issue 2, 2017, Pages 45-53]
  • Malekzadeh Fard, K. The effects of arbitrary boundary conditions on a laminated composite plate response subjected to large mass & low velocity impact [Volume 8, Issue 1, 2018, Pages 35-49]
  • Malmirnasab, A. Vibration suppression of flexible two link robot using piezoelectric transducer on a predefined path [Volume 7, Issue 3, 2017, Pages 185-197]
  • Mamandi, A. Nonlinear Vibration of a Microbeam on a Winkler Foundation and Subjected to an Axial Load using Modified Couple Stress Theory [Volume 10, Issue 4, 2021, Pages 181-194]
  • Mamandi, Ahmad Dynamic Study of a Microbeam Conveying Fluid Flow on a Viscoelastic-Pasternak Foundation and Subjected to an Axial Load using Modified Couple Stress Theory [Volume 11, Issue 1, 2021, Pages 257-273]
  • Manafi, D. Experimental Investigation and Optimization of Bi-Layered Tube Hydroforming Process Parameters with Particle Swarm Optimization Algorithm [Volume 7, Issue 2, 2017, Pages 45-53]
  • Managheb, Sayed A. M. Design of hybrid control system for path tracking of a quadrotor subject to uncertain disturbances [Volume 11, Issue 5, 2021, Pages 17-32]
  • Mani, M. Experimental investigation of Boundary Layer on an Oscillating (Pitching) Supercritical Airfoil in Compressible Flow Using Multiple Hot Film Sensors [Volume 5, Issue 3, 2015, Pages 173-184]
  • Manouchehri, A.M. Investigating on the energy absorption of PA/GF6 thermoplastic composite produced by hot pressing method under low-velocity impact test [Volume 13, Issue 1, 2023, Pages 1-13]
  • Maraki, M.R. Feasibility of Aluminum-Copper Bimetallic Bar Production by Combined Equal Channel Angular Pressing and Direct Extrusion Process [Volume 11, Issue 2, 2021, Pages 193-207]
  • Maraki, M.R. Experimental and fractography investigation of notch depth effect by instrumented instrumented impact pendulum in 7075 Aluminum alloy [Volume 11, Issue 3, 2021, Pages 15-36]
  • Marashi, M. H. Investigation on the tank vehicle dynamic performance influenced by fluid sloshing using multidisciplinary simulation technique [Volume 8, Issue 1, 2018, Pages 183-202]
  • Marashi, Sayed S. Investigation of nonlinear pull-in phenomena in functionally graded micro-beams under electrostatic excitation [Volume 8, Issue 3, 2018, Pages 137-151]
  • Marashi, Seyed M. Indirect Damage detection in bridge using transmissibility measurements from the response of a passing vehicle [Volume 9, Issue 4, 2019, Pages 59-76]
  • Marashi, Seyed M. Size-dependent vibration of rotating rayleigh microbeams with variable cross-section in complex environments [Volume 11, Issue 6, 2022, Pages 159-171]
  • Mardalizadeh, Mansour Experimental evaluation of the tool rotation speed and feed rate on micro hardness and microstructure of 5456 aluminum alloy in friction stir welding process [Volume 3, Issue 3, 2013, Pages 1-10]
  • Mardani, M. Numerical simulation of radiance effects on the aerodynamic heating of ablative nose with VSL-VBLS method [Volume 7, Issue 1, 2017, Pages 175-186]
  • Mardani, R. Flow field modeling and performance improving of an axial turbine's using Adjoint method [Volume 8, Issue 1, 2018, Pages 127-133]
  • Maroofiazar, R. Experimental study of subsurface damage and material removal mechanisms in abrasive waterjet milling process of aluminum oxide ceramic [Volume 10, Issue 2, 2020, Pages 253-265]
  • Maryami, R. Experimental investigation of head resistance reduction by air bubbles in turbulent Couette-Taylor flow [Volume 7, Issue 1, 2017, Pages 147-160]
  • Marzbanrad, J. Improve the Crashworthiness Properties of AA7075 Tube under Axial Impact Loading by Geometrical Change [Volume 9, Issue 1, 2019, Pages 55-69]
  • Mashayekh, V. Feature Extraction Based on Deep Learning for Mechanical Bearing Fault Detection and Classification in Squirrel Cage Induction Machine [Volume 11, Issue 5, 2021, Pages 33-48]
  • Mashayekhi, H. Feature Extraction Based on Deep Learning for Mechanical Bearing Fault Detection and Classification in Squirrel Cage Induction Machine [Volume 11, Issue 5, 2021, Pages 33-48]
  • Masih-Tehrani, M. Reduction of fore-aft vibration to truck's driver by tunning the seat backrest [Volume 7, Issue 3, 2017, Pages 29-39]
  • Masoudi Nejad, R. A survey on processing map for the hot deformation of Copper - Alumina nanocomposites using artificial neural network [Volume 7, Issue 2, 2017, Pages 55-62]
  • Masoumi, H. Investigation of natural convection heat transfer of viscoplastic nanofluids-Casson model in a square enclosure [Volume 11, Issue 4, 2021, Pages 165-178]
  • Masoumi Dehaghi, I. Investigation of sequence effect on welding residual stresses and distortion in a aluminum shell opening [Volume 8, Issue 3, 2018, Pages 1-14]
  • Mazaheri, K. A DNS investigation of drag reduction phenomenon in turbulent flow of a viscoelastic fluid [Volume 7, Issue 1, 2017, Pages 255-274]
  • Mazaheri, Kiumars The Modeling of Cement Rotary Kiln Based on Spang Model for Investigation of CO2 Emission in Cement Production Process [Volume 5, Issue 2, 2015, Pages 205-216]
  • Mazdak, S. Calculation of springback with considering of hardening laws in the cold roll forming process of the steel plate [Volume 10, Issue 2, 2020, Pages 1-10]
  • Mazdak, S. Optimization of ultrasonic transducer horn geometry with vibrational-thermal performance improvement approach [Volume 11, Issue 1, 2021, Pages 31-42]
  • Mazdak, S. Investigation of operational parameters on the motional behavior and maximum particle levitated density in ultrasonic levitation [Volume 11, Issue 3, 2021, Pages 71-84]
  • Mazinanian, Z A Rule-based Evaluation of Ladder Logic Diagram and Timed Petri Nets for Programmable Logic Controllers [Volume 2, Issue 3, 2012, Pages 29-34]
  • Mazloumi, S. H. Improvement of hydrothermal performance of microchannel heat sinks using V-shape pin-fins and Al2O3 / water nanofluid [Volume 8, Issue 4, 2019, Pages 211-228]
  • Mazraeh ei Farahani, M. Stress and Strain Analysis of Femur in Taylor Spatial Frame [Volume 8, Issue 1, 2018, Pages 13-21]
  • Mehrabi moheb, Alireza Dynamic Study of a Microbeam Conveying Fluid Flow on a Viscoelastic-Pasternak Foundation and Subjected to an Axial Load using Modified Couple Stress Theory [Volume 11, Issue 1, 2021, Pages 257-273]
  • Mehregan, Mahmood Thermodynamic and economic analyses of combined generation system based on hybrid prime mover of internal and external combustion engines with natural gas and biomass power sources [Volume 13, Issue 6, 2024, Pages 103-119]
  • Mehrkish, A. Dynamic responses assessment in fault diagnosis of multi-function active engine mounts with cooling capacities [Volume 9, Issue 3, 2019, Pages 1-12]
  • Mehrvar, A. Multi-objective optimization of electrochemical machining parameters using response surface methodology [Volume 7, Issue 4, 2018, Pages 49-60]
  • Mehrvar, A. Modeling of Electrochemical Machining of Nickel-Based Single Crystal Super Alloy by Combining Numerical and Design of Experiments Methods [Volume 10, Issue 3, 2020, Pages 207-217]
  • Meigoli, V. Design and Tuning of Robust Proportional-Derivative Sliding-Mode Control (PD-SMC) in Stabilization of 2-DOF Robot Manipulator [Volume 9, Issue 4, 2019, Pages 137-150]
  • Meisami, F. Analytical and Experimental Investigation for Nonlinear Behavior of Flange Joints Under Axial and Lateral Loading [Volume 6, Issue 3, 2016, Pages 43-54]
  • Meisami, F. An Investigation for Nonlinear Dynamic Behavior of Flange Joints Under Lateral Loading [Volume 7, Issue 4, 2018, Pages 35-48]
  • Mesforoosh, H. Optimization of Bearing Location for Multi-Stepped Rotor by Genetic Algorithm [Volume 6, Issue 1, 2016, Pages 99-106]
  • Mikaeeli, S. 3-D bending analysis of thick functionally graded plate in different boundary conditions using Element-Free Galerkin (EFG) method [Volume 6, Issue 2, 2016, Pages 109-120]
  • Mirabdolah Lavasani, A. Numerical study of the effect of phase change materials containing multi-walled carbon nanotubes on improving the heat sink performance of electrical equipment [Volume 13, Issue 1, 2023, Pages 25-41]
  • Mirak, A.R. Modeling of Electrochemical Machining of Nickel-Based Single Crystal Super Alloy by Combining Numerical and Design of Experiments Methods [Volume 10, Issue 3, 2020, Pages 207-217]
  • Miralam, M. Stability Analysis of Natural Convection with Variable Physical Coefficients Using Linear Stability Theory [Volume 8, Issue 1, 2018, Pages 157-169]
  • Miralinaghi, M. Using GMDH-type neural network model to predict the response of triangular plates under the hydrodynamic loading [Volume 10, Issue 3, 2020, Pages 233-243]
  • Miralinaghi, Mahsasadat Experimental investigation into the energy absorption of sandwich structures with the core made of waste rubber particles under impact loading [Volume 12, Issue 6, 2023, Pages 13-23]
  • Mirbozorgi, Seyed A. Numerical simulation of the dynamic and thermodynamic an MHD micropump by independently changing the lengths of electric and magnetic fields [Volume 5, Issue 3, 2015, Pages 271-287]
  • Mirbozorgi, Seyed Ali Numerical simulation of electroosmotic flow in two micropumps with series connection to evaluate the increase in performance of integrated micropump [Volume 12, Issue 5, 2022, Pages 237-251]
  • Mirdamadi, H. R. Free and Force Vibration Analysis of Cracked Euler-Bernoulli Beam with Spectral Finite Element Method [Volume 5, Issue 2, 2015, Pages 57-70]
  • Mirdamadi, H. R. Dynamic analysis of prestressed Timoshenko beam by using wavelet-based spectral finite element method [Volume 6, Issue 4, 2016, Pages 11-22]
  • Mirhosseini, Mojtaba Study on performance of floating solar still using pumice stone as photothermal material [Volume 13, Issue 3, 2023, Pages 129-142]
  • Mirnezhad, N. The study of the effects of triangular roughness on the thermal creep flow in Knudsen pumps with DSMC method [Volume 10, Issue 4, 2021, Pages 97-109]
  • Mirnia, M. J. Study of the Effect of Calibration Procedure on the Accuracy of the Phenomenological Ductile Fracture Criteria in Sheet Metal Forming [Volume 10, Issue 1, 2020, Pages 1-16]
  • Mirsajedi, Seyyed M. Investigation Axisymmetric Aerospike Nozzle [Volume 9, Issue 3, 2019, Pages 177-189]
  • Mirsalim, S. M. Investigation of the effect of air intake pressure and fuel injection parameters on upgrading power and emissions of heavy duty diesel engine [Volume 6, Issue 4, 2016, Pages 239-247]
  • Mirsalim, S. M. Investigation of the effect of air intake pressure and fuel injection parameters on upgrading power and emissions of heavy duty diesel engine [Volume 6, Issue 4, 2016, Pages 239-247]
  • Mirshafiee, Saeed Experimental and numerical study on the effects of friction and specimen dimension in split Hopkinson pressure bar [Volume 12, Issue 5, 2022, Pages 1-11]
  • Mirshojaeian Hosseini, M.J Analysis and examination of the factors contributing to rapidness of response time in non-linear model of electro-hydrostatic actuator [Volume 4, Issue 1, 2014, Pages 11-23]
  • Mirzababaee, Seyyed M. Experimental Investigation of Indoor Cooking Using an Indirect Solar Cooker Integrated with Heat Storage Materials [Volume 11, Issue 3, 2021, Pages 207-219]
  • Mirzababaee, Seyyed M. Thermodynamic Analysis of an Evacuated Tube Solar Cooker under Different Operating Conditions [Volume 11, Issue 5, 2021, Pages 259-268]
  • Mirzababaie Mostofi, T. Experimental Study and Mathematical Modeling of Deformation of Rectangular Plates under the Impact Load [Volume 6, Issue 1, 2016, Pages 143-152]
  • Mirzababaie Mostofi, T. Plastic deformation of polymeric-coated aluminum plates subjected to gas mixture detonation loading: Part I: Experimental studies [Volume 9, Issue 1, 2019, Pages 71-83]
  • Mirzababaie Mostofi, T. Plastic deformation of polymeric-coated aluminum plates subjected to gas mixture detonation loading: Part II: Analytical and empirical modelling [Volume 9, Issue 2, 2019, Pages 15-29]
  • Mirzababaie Mostofi, T. Experimental Investigation of Spot Welding Process on Metallic Targets Impacted by Flat and Conical Projectiles [Volume 9, Issue 3, 2019, Pages 39-49]
  • Mirzababaie Mostofi, T. Experimental investigation and optimal analysis of the high-velocity forming process of bilayer plates [Volume 9, Issue 3, 2019, Pages 65-80]
  • Mirzababaie Mostofi, T. Response of reinforced metallic plates with polyurea coating subjected to high-velocity projectile impact by finite element method and presenting a model based on evolutionary regression [Volume 10, Issue 1, 2020, Pages 133-148]
  • Mirzababaie Mostofi, T. A study on plastic response of circular plates under uniformly and locally distributed dynamic loading [Volume 10, Issue 2, 2020, Pages 11-27]
  • Mirzababaie Mostofi, T. Using GMDH-type neural network model to predict the response of triangular plates under the hydrodynamic loading [Volume 10, Issue 3, 2020, Pages 233-243]
  • Mirzababaie Mostofi, T. A study on the ballistic performance of single-layered and multi-layered structures impacted by spherical rigid projectile: experimental investigation and modelling [Volume 10, Issue 4, 2021, Pages 125-143]
  • Mirzababaie Mostofi, T. Experimental investigation of large plastic deformation of single- and multi-layered circular aluminum plates under repeated uniform impulsive loading [Volume 11, Issue 1, 2021, Pages 123-137]
  • Mirzababaie Mostofi, T. Investigation of the influence of standoff distance of explosive charge on the response of circular metallic plates [Volume 11, Issue 2, 2021, Pages 175-191]
  • Mirzababaie Mostofi, T. Dynamic response of sandwich circular blast shield with tubular cores under free blast load [Volume 11, Issue 4, 2021, Pages 71-83]
  • Mirzababaie Mostofi, T. Experimental Investigation into the Behaviour of FMLs Containing Nanoparticles under Repeated Low-velocity Impact [Volume 11, Issue 6, 2022, Pages 187-206]
  • Mirzababaie Mostofi, Tohid Presenting an analytical model based on the energy method to study the plastic deformation of circular plates under uniformly repeated blast loading [Volume 12, Issue 3, 2022, Pages 33-43]
  • Mirzabeigy, A. Application of elastic support assumption for accuracy improvement of crack detection in beams using firefly algorithm [Volume 5, Issue 4, 2016, Pages 105-115]
  • Mirzaee, I. Numerical simulation of incompressible viscous external flow using mesh-free lattice Boltzmann method [Volume 4, Issue 4, 2015, Pages 175-189]
  • Mirzaee, I. Influence of gas channels and Gas Diffusion Layers configuration on the performance of Polymer Electrolyte Membrane Fuel Cell [Volume 9, Issue 3, 2019, Pages 249-263]
  • Mirzaee, Iraj Investigating the effect of the geometry of gas injection channels on the performance and dynamic behavior of the polymer electrolyte membrane fuel cell [Volume 13, Issue 2, 2023, Pages 121-128]
  • Mirzaee Kakhki, Elyas Guided wave modeling using p version of semi analytical finite element method [Volume 13, Issue 3, 2023, Pages 1-16]
  • Mirzaee Sisan, M. An Experimental Study on Drop weight Impact Properties of Composite Laminates Aluminum/Epoxy Resin with Fibers Reinforcement [Volume 5, Issue 4, 2016, Pages 97-104]
  • Mirzaei, Jaber Optimization of Shear Strength of 420 Stainless Steel Brazing Joints Using BNi-2 by Response Surface Methodology [Volume 13, Issue 6, 2024, Pages 47-58]
  • Mirzaei, M. Investigations of Transient Thermal Response of Pulse Detonation Engine Tube under Sequential Operation [Volume 9, Issue 1, 2019, Pages 153-171]
  • Mirzaei, M. Design and Tuning of Robust Proportional-Derivative Sliding-Mode Control (PD-SMC) in Stabilization of 2-DOF Robot Manipulator [Volume 9, Issue 4, 2019, Pages 137-150]
  • Mirzaei, M. Using JST and CUSP schemes in aerodynamic optimization based on discrete adjoint method in a viscous all-speed solver developed on unstructured grid [Volume 11, Issue 3, 2021, Pages 1-14]
  • Mirzaei, M. Free vibration analysis of functionally graded graphene platelets – reinforced composite conical shell panels with different boundary conditions [Volume 12, Issue 2, 2022, Pages 49-64]
  • Mirzaei, Majid Modeling of Crashworthiness in Energy Absorbent Shells with Discontinuities [Volume 13, Issue 6, 2024, Pages 1-15]
  • Mirzaei ghaleh, M. Nonlinear Vibration of a Microbeam on a Winkler Foundation and Subjected to an Axial Load using Modified Couple Stress Theory [Volume 10, Issue 4, 2021, Pages 181-194]
  • MirzaeiNasirabad, Hossein Experimental investigation of cracks pattern effect on the failure of rock-like materials under uniaxial compression loading [Volume 2, Issue 1, 2012, Pages 23-34]
  • Mirzai, M. A. Study of the Effect of Calibration Procedure on the Accuracy of the Phenomenological Ductile Fracture Criteria in Sheet Metal Forming [Volume 10, Issue 1, 2020, Pages 1-16]
  • Mirzakhani, Aboozar Adaptivity in isogeometric analysis of structures using error estimation methods based on stress recovery [Volume 5, Issue 3, 2015, Pages 79-91]
  • Mirzakhani, Aboozar Error estimation based on stress recovery by adaptivity in nonlinear problems of elasto-plasticity behavior by isogeometric method [Volume 13, Issue 3, 2023, Pages 67-84]
  • Moavenian, M. Analytical and Experimental Investigation for Nonlinear Behavior of Flange Joints Under Axial and Lateral Loading [Volume 6, Issue 3, 2016, Pages 43-54]
  • Moavenian, M. An Investigation for Nonlinear Dynamic Behavior of Flange Joints Under Lateral Loading [Volume 7, Issue 4, 2018, Pages 35-48]
  • Moavenian, M. Experimental Analysis of Elastic Dampers Effect on Reflected Waves from Plate Edges in Sound Localization [Volume 8, Issue 3, 2018, Pages 205-212]
  • Moayedian, Sayed Mohammad Structural Analysis of Persian Historical Brick Masonry Minarets under Wind Load [Volume 5, Issue 1, 2015, Pages 165-176]
  • Moayyedi, M. K. Calibration the Effects of Non-Divergence Free and High Level Energy Modes in POD Reduced Order Model of Incompressible Flows Using Adjoint Continuity Equation [Volume 5, Issue 4, 2016, Pages 243-256]
  • Moayyedi, M. K. Numerical simulation of two-phase flow and study of behavior of aerosols and dust particles under different weather conditions and sedimentation process of dusts [Volume 8, Issue 2, 2018, Pages 251-264]
  • Mobasheri, R. Analysis the Simultaneous Effects of Injection Pressure and EGR on the Engine Performance and the Amount of Pollutant Emissions in a High Speed Direct Injection (HSDI) Diesel Engine [Volume 7, Issue 3, 2017, Pages 213-226]
  • Mobayen, S. Control of Uncertain Nonlinear Bilateral Teleoperation System Based on Backstepping Fuzzy Adaptive Approach [Volume 10, Issue 1, 2020, Pages 121-132]
  • Mobini, K. Experimental investigation of the effect of parallel-flow primary nozzle on the performance of the ejector [Volume 11, Issue 3, 2021, Pages 235-244]
  • Modabberifar, Mehdi Experimental extraction of modulus of elasticity of gastric cancer tissue using cylindrical developed contact mechanics models [Volume 13, Issue 4, 2023, Pages 83-94]
  • Modanloo, V. Experimental and numerical investigation of the sheet forming in hydroforming process [Volume 5, Issue 4, 2016, Pages 27-33]
  • Modanloo, Vahid Application of multi-criteria decision making method for selection of lightweight material in manufacturing of railway vehicles [Volume 13, Issue 3, 2023, Pages 45-53]
  • Modanloo, Vahid Experimental investigation of the formability of heat treated AA6063 tubes using hydraulic rotary draw bending process [Volume 13, Issue 4, 2023, Pages 95-106]
  • Modarres, M. Design and simulation of a two-axis thermal MEMS accelerometer with optimized sensitivity [Volume 8, Issue 2, 2018, Pages 13-24]
  • Modarres Gheisari, Seyed M. M. Piezoelectric Configurations Effects on Acoustic Energy Density in an Ultrasonic Microcontainer for Preparing Nanoemulsion [Volume 8, Issue 3, 2018, Pages 15-28]
  • Modarres Razavi, Seyyed M. R. Experimental Investigation on Low Swirl Premixed Combustion and Effects of Geometrical Parameters on Its Performance [Volume 5, Issue 2, 2015, Pages 191-204]
  • Moeenfard, H. Modeling piezoelectric based energy harvesters under random base excitation [Volume 6, Issue 1, 2016, Pages 1-10]
  • Moeenfard, H. Performance Comparison of the Electro/Magneto-Rheological Elastomers for Vibration Reduction of Rotating Rotors [Volume 9, Issue 3, 2019, Pages 139-153]
  • Moeinkhah, H. Analytical solution for nonlinear dynamic response of the viscoelastic microbeam under electrical actuation based upon micropolar theory of elasticity [Volume 9, Issue 3, 2019, Pages 125-138]
  • Moeinkhah, H. Actuation of an Ionic Polymer Metal Composite Actuator with EMG Signal by Using Fuzzy Clustering Method [Volume 10, Issue 4, 2021, Pages 253-262]
  • Moetakef Imani, Behnam Robust and Adaptive Controller for Wind Turbine Blade Testing Machine [Volume 5, Issue 3, 2015, Pages 27-38]
  • Moghaddam, S. Analysis Of Turbulent Combined Heat Transfer (Mixed Convection-Thermal Radiation) Heat Transfer in a Vertical Three Dimensional Duct With Variable Thermo-physical Properties [Volume 8, Issue 1, 2018, Pages 83-97]
  • Moghiman, M. Numerical and experimental study of natural gas preheating effects on the soot formation, flame luminosity and NO emission [Volume 7, Issue 1, 2017, Pages 79-90]
  • Moghiman, Mohammed Experimental study of solar collector with helical coil [Volume 12, Issue 5, 2022, Pages 283-292]
  • Moghimi, I. Force and stress analysis of double press machine in use with single-action die press [Volume 6, Issue 1, 2016, Pages 167-177]
  • Moghimi, M. Investigation of geometric effective parameters in design of 1.5kW hydraulic dynamometer [Volume 5, Issue 4, 2016, Pages 151-162]
  • Mohaddes Deylami, H. Numerical investigation of collecting wire electrode effect on the flow field and heat transfer with electrohydrodynamic actuator [Volume 6, Issue 1, 2016, Pages 201-213]
  • Mohaddes Deylami, H. Numerical Investigation of the Effect of Corona Discharge on the Heat Transfer and Pressure Drop over a Single Slot [Volume 6, Issue 4, 2016, Pages 205-221]
  • Mohaddes Deylami, Hamed Numerical Investigation of the Electric Field Effects on the Flow and Forced Convection Heat Transfer over a Backward-acing Step [Volume 5, Issue 2, 2015, Pages 233-248]
  • Mohajeri, M. A numerical feasibility study on using piezoelectric pumps as dosing pumps by implementing fluid-structure interaction [Volume 12, Issue 1, 2022, Pages 175-189]
  • Mohamadkhani, H. Simulation and performance investigation of a typical guidance system with suitable modeling of the guidance system elements and its sensitivity with respect to aerodynamic coefficients [Volume 8, Issue 2, 2018, Pages 235-249]
  • Mohammad Hosseini Mirzaei, M. Numerical study of side fixture and feed rate method for decrease of force imposed by spindle of machine on the incremental forming groove test [Volume 6, Issue 2, 2016, Pages 61-67]
  • Mohammad Hosseini Mirzaei, M. Analysis of functionally graded beams with variable thickness using first-order shear deformation theory subjected to mechanical and thermal loads [Volume 10, Issue 1, 2020, Pages 65-76]
  • Mohammad Hosseinzadeh, M. Experimental and Numerical Investigation of Die Filling and Thickness Distribution for Producing Bended Tubes with Non-Uniform Bending Radius and Diameter in Hydroforming Die with Moveable Bushes [Volume 7, Issue 1, 2017, Pages 11-21]
  • Mohammadi, A. Stability Analysis of Natural Convection with Variable Physical Coefficients Using Linear Stability Theory [Volume 8, Issue 1, 2018, Pages 157-169]
  • Mohammadi, A. nvestigation of a Broad category Of AUSM Family in the 1D and 2D Unsteady Flows [Volume 10, Issue 4, 2021, Pages 303-315]
  • Mohammadi, A. Effect of Gas injector direction on mixture formation in a spark ignition engine [Volume 11, Issue 2, 2021, Pages 233-246]
  • Mohammadi, A. Design of hybrid control system for path tracking of a quadrotor subject to uncertain disturbances [Volume 11, Issue 5, 2021, Pages 17-32]
  • Mohammadi, H. Dynamic Analysis of Autofrettage under Transient Loading in FG Thick-Walled Cylinder with Work Hardening Behavior Using Numerical Method [Volume 9, Issue 1, 2019, Pages 27-43]
  • Mohammadi, H. Designing of a High Sensitivity Graphene Mass Sensor for Measuring Different Mass Distributions Based on Nonlinear Frequency Shift [Volume 10, Issue 4, 2021, Pages 27-40]
  • Mohammadi, J. Analysis of a High-Speed Underwater Supercavitating Projectile Dynamics, Based on an Experiment [Volume 9, Issue 1, 2019, Pages 279-291]
  • Mohammadi, J. Dynamic Behavior of Articulated Pipes Conveying Fluid With Harmonic Velocity Using the Method of Multiple time scales [Volume 11, Issue 3, 2021, Pages 53-70]
  • Mohammadi, M. Improvement of hydrothermal performance of microchannel heat sinks using V-shape pin-fins and Al2O3 / water nanofluid [Volume 8, Issue 4, 2019, Pages 211-228]
  • Mohammadi, M. Investigation of the effect of cavity insertion in brick on heat transfer through using computational fluid dynamic simulation [Volume 10, Issue 2, 2020, Pages 267-283]
  • Mohammadi, M. Analysis of two- and three-dimensional transient heat conduction problems including moving point heat sources using the method of fundamental solutions [Volume 10, Issue 3, 2020, Pages 295-307]
  • Mohammadi, Mehdi Investigation of aspect ratio effect on focusing of Nano-bio particle in viscoelastic fluid [Volume 13, Issue 5, 2023, Pages 187-201]
  • Mohammadi, Morteza Improvement aerodynamic performance of a wind turbine using injecting air jet and Taguchi optimization. [Volume 12, Issue 5, 2022, Pages 215-235]
  • Mohammadi, N. Nonlinear Vibration Analysis of Asymmetric Rotor with Misaligned Coupling Using Timoshenko Beam Theory [Volume 11, Issue 3, 2021, Pages 37-51]
  • Mohammadi, P. Experimental investigation and estimation of thermal conductivity and contact conductance of granular activated carbon packed bed as a function of density [Volume 10, Issue 2, 2020, Pages 193-204]
  • Mohammadi, R. A numerical feasibility study on using piezoelectric pumps as dosing pumps by implementing fluid-structure interaction [Volume 12, Issue 1, 2022, Pages 175-189]
  • Mohammadi, S. Reliability Analysis and Evaluating of Rotary Drilling Machine – Case Study: Mine No.1 of Golgohar Iron Ore Mine [Volume 6, Issue 3, 2016, Pages 185-194]
  • Mohammadi, S.M.H. Technical and Economic Feasibility Study of the Use of Phase Change Materials (PCMs) in the Combination of Compression Refrigeration and Free Cooling Systems, Case Stusy: A Residential Building in Kerman [Volume 12, Issue 1, 2022, Pages 51-66]
  • Mohammadi, Y. Analytical and numerical survey of FG sandwich beams under the local loading and temperature-dependent properties [Volume 5, Issue 4, 2016, Pages 127-137]
  • Mohammadi-Ahmar, A. Uncertainty quantification of the turbulent flow field and heat transfer of film cooling [Volume 10, Issue 2, 2020, Pages 177-192]
  • Mohammadi-Amin, M. Numerical Investigation of Oscillations of Flexible Stabilizer Attached to Forced Vibrated Body via Fluid-Structure Interaction Simulation [Volume 9, Issue 2, 2019, Pages 47-59]
  • Mohammadian, E. Investigation of the effect of several impressive parameters on fire extinguishing in a progressive coal tunnel [Volume 12, Issue 4, 2022, Pages 117-131]
  • Mohammadian, Esmail Investigating the Effect of Opening Aspect Ratio and Combustion Source Conditions on Behavior of Backdraft Phenomenon by Large Eddy Simulation [Volume 11, Issue 3, 2021, Pages 165-179]
  • Mohammadi Firuzjaei, S. Presenting a new method for evaluating friction effects at extrusion die entrance based on combination of the open die backward extrusion and ring compression tests [Volume 11, Issue 1, 2021, Pages 73-88]
  • Mohammadi Ghazi Jahani, S. Thermodynamic analysis of using compressor in absorption heat transformers with ammonia-lithium nitrate and ammonia sodium thiocyanate as working fluids [Volume 11, Issue 3, 2021, Pages 221-234]
  • Mohammadi Hooyeh, H. Primary creep analysis of nanocomposite thick-walled sphere under thermal, magnetic and mechanical loading using viscoelastic Bergurs model [Volume 6, Issue 3, 2016, Pages 163-174]
  • Mohammadimehr, Mehdi Free vibration of the cylindrical panel made of functionally graded materials resting on pasternak elastic foundation subjected to magnetic fields using first order shear deformation theory [Volume 5, Issue 1, 2015, Pages 149-163]
  • Mohammadi Noori, M. Introducing a novel corrugated profile generated from tangential circular curves to increase energy absorption [Volume 11, Issue 3, 2021, Pages 135-149]
  • Mohammadipour, O. R. Optimal design of a three-outlet channel with specified outlet flow rates using the topology optimization method [Volume 11, Issue 1, 2021, Pages 153-168]
  • Mohammadiun, H. Optimization of shell and tube heat exchangers using heuristic algorithms [Volume 8, Issue 3, 2018, Pages 153-163]
  • Mohammadiun, M. Optimization of shell and tube heat exchangers using heuristic algorithms [Volume 8, Issue 3, 2018, Pages 153-163]
  • Mohammad Khanlo, Heshmatallah Influence of active magnetic bearing stiffness on Chaotic vibration of flexible rotor [Volume 6, Issue 2, 2016, Pages 1-16]
  • Mohammadpour, L. Investigating the effect of Marangoni phenomenon on single drop density on Wenzel and Cassie structures [Volume 10, Issue 4, 2021, Pages 387-398]
  • Mohammadpour, Moein Enhancing the performance of Bi-stable Energy Harvester using Chaos control [Volume 11, Issue 2, 2021, Pages 1-14]
  • Mohammadpour, O. Optimal Control of Skid Steer Wheeled Mobile Robots by Analytical Approach [Volume 7, Issue 4, 2018, Pages 135-145]
  • Mohammad Rezaei, Hamidreza Numerical study of the use of focused ultrasound waves by the phased array method in the inspection of polyethylene pipe joints. [Volume 13, Issue 5, 2023, Pages 155-165]
  • Mohammadzadeh, A.R Force Convection Heat Transfer from a Stationary circular Cylinder in Non-Newtonian Fluids [Volume 5, Issue 4, 2016, Pages 229-242]
  • Mohammadzadeh, A.R. Free nonlinear vibration analyzing of annular sector plate in contact with fluid [Volume 11, Issue 2, 2021, Pages 73-86]
  • Mohammadzadeh Kowsari, M. Numerical study of the effects of aluminum particle additives in adsorbent bed on the performance of adsorption refrigeration systems [Volume 8, Issue 3, 2018, Pages 261-275]
  • Mohseni, A. Design of a Micro-Separator for Circulating Tumor Cells (CTCs) from Blood Flow Using Hybrid Pinched Flow Fractionation (PFF) and Dielectrophoresis Methods [Volume 10, Issue 1, 2020, Pages 281-296]
  • Mohseni, I. Experimental Study on Heat Transfer of Water/TiO2 Nanofluid in a Straight Tube with Twisted Tapes at Constant Wall Temperature [Volume 5, Issue 3, 2015, Pages 165-172]
  • Mohsenian, V. Seismic characteristics of tunnel form concrete buildings with irregular plan [Volume 5, Issue 3, 2015, Pages 1-15]
  • Mojaddam, M. Design of a Micro-Separator for Circulating Tumor Cells (CTCs) from Blood Flow Using Hybrid Pinched Flow Fractionation (PFF) and Dielectrophoresis Methods [Volume 10, Issue 1, 2020, Pages 281-296]
  • Mojahedi, M. Investigation of instability and vibration behavior of microbeam-gyroscope with considering distribution of proof mass [Volume 8, Issue 2, 2018, Pages 93-106]
  • Mokhtari, A. Dynamic analysis of prestressed Timoshenko beam by using wavelet-based spectral finite element method [Volume 6, Issue 4, 2016, Pages 11-22]
  • Mokhtari, D. Experimental Investigation of the Effect of Location of Cylindrical Protuberance on the Thrust Vector of a Supersonic C-D nozzle [Volume 9, Issue 1, 2019, Pages 237-249]
  • Mokhtari, H. Exergy, Exergoeconomic & Environmental Impact Analysis and Multi-Objective Optimization of Damavand Combined Cycle Power Plant [Volume 5, Issue 2, 2015, Pages 303-328]
  • Mokhtari, H. Optimization of Shazand Arak power plant boiler rifled tubes using genetic algorithm [Volume 6, Issue 3, 2016, Pages 227-237]
  • Mokhtari, Javad Comparative investigation of nanofluid heat transfer in vertical annular channel with cosine heat flux by experimental and numerical methods [Volume 13, Issue 4, 2023, Pages 147-158]
  • Mokhtari, M.A. Analysis of axial symmetric circular cylindrical shell vibrations using high-order theory to approximate transverse displacement by finite element [Volume 11, Issue 2, 2021, Pages 87-97]
  • Molaei, Abbas Numerical simulation of forced heat transfer of liquid metals in a microchannel heat sink under a magnetic field [Volume 13, Issue 6, 2024, Pages 121-137]
  • Molla-Alipour, M. Parametric Analysis of Non-Uniform Shear Load on the Displacement and Stress Components of for FG Rectangular Plates Resting on Two-Parameter Elastic Foundation [Volume 8, Issue 4, 2019, Pages 111-127]
  • Molla-Alipour, M. Stress analysis of circular plates with variable thickness as transverse asymmetric [Volume 9, Issue 1, 2019, Pages 97-109]
  • Mollaei, Tahereh Experimental and theoretical investigation of Young's modulus of liver cancer tissue using rectangular, V-shaped and dagger cantilevers of an atomic force microscope [Volume 13, Issue 5, 2023, Pages 121-135]
  • Mollaei Dariani, B. Assessment of Galling Wear in Automobile Deep Drawing Dies Using Slider-on-Flat-Surface Wear Test [Volume 11, Issue 3, 2021, Pages 151-164]
  • Molla-Mohammad Zamani, A.R. Experimental and numerical analysis of effective geometrical parameters for energy absorbing of the structures with negative Poisson's ratio made from aluminium alloy 1100 [Volume 11, Issue 1, 2021, Pages 311-324]
  • Moltani Shahrakht, A. A. Investigation of Wave Characteristics and Wave Resistance of an Underwater vehicle with Control Surface Near the Free Surface [Volume 12, Issue 2, 2022, Pages 65-79]
  • Mondali, M. optimization of locomotive structure by using of natural frequency and maximum stress constraints [Volume 8, Issue 1, 2018, Pages 23-33]
  • Montazeri, M.J. Exergy Analysis and Numerical Investigation of the Effects of Nozzle Profile on the Partially-Admitted Supersonic Turbine's Performance [Volume 11, Issue 1, 2021, Pages 169-184]
  • Moodi, Hossein Analysis of fire development in a passenger car considering various insulation [Volume 13, Issue 5, 2023, Pages 91-104]
  • Moosaie, Amin Nonlinear Thermo-Elastic Analysis of FG Cylinder with Temperature-Dependent Properties with Perturbation and Differential Quadrature Methods [Volume 13, Issue 4, 2023, Pages 1-14]
  • Moradi, M. Investigation of metallurgical and mechanical properties of TIG welded parts for material replacement [Volume 7, Issue 4, 2018, Pages 87-95]
  • Moradi, M. Statistical Analysis of Parameters Affecting the Mechanical Properties of Surface Composite Al7075/Al2O3 Produced by Friction Stir Processing Using Response Surface Methodology [Volume 9, Issue 3, 2019, Pages 81-94]
  • Moradi, M. Design of Optimal FOPID Controller for Speed Control of DC Motor Including Drive and Chopper Dynamic Considering Multi-Objective Optimization Using Water Cycle Optimization Algorithm [Volume 10, Issue 1, 2020, Pages 149-160]
  • Moradi, M. Optimal Power System Stabilizer Design for a Multi-machine Power System to Damp the Low Frequencies using Metaheuristic Algorithms [Volume 10, Issue 3, 2020, Pages 195-206]
  • Moradi, R. An investigation on the microstructure and mechanical properties of dissimilar laser welded joint between AISI 430 ferritic stainless steel and AISI 2304 duplex stainless steel in order to optimize the fracture force of joints [Volume 10, Issue 3, 2020, Pages 158-147]
  • Moradi, S. Finite element model updating using operational modal analysis and bees optimization algorithm [Volume 7, Issue 4, 2018, Pages 117-133]
  • Moradi, Sh Transient Stress Analysis In Adhesive Single Lap Joints of a Composite Material Due To Fiber Breakage [Volume 4, Issue 4, 2015, Pages 113-126]
  • Moradi, Sh. Study on Free Vibration of Buckled Cracked Plates Using Differential Quadrature Element Method [Volume 8, Issue 4, 2019, Pages 67-83]
  • Moradi Kelardeh, Sh. Determination of Cylinder Head Bolts Force Distribution and There’s Life in Real Condition of Marine Diesel Engine [Volume 10, Issue 3, 2020, Pages 47-59]
  • Moradi-Maryamnegari, H. L1 adaptive controller design of a space system considering structural flexibility [Volume 6, Issue 2, 2016, Pages 17-27]
  • Moradi Zirkohi, M. Designing Optimal PID Controller Using Modified Particle Swarm Optimization [Volume 5, Issue 2, 2015, Pages 163-168]
  • Moradi Zirkohi, M. Fuzzy sliding mode control of Lorenz chaotic system using improved model reference approach [Volume 5, Issue 4, 2016, Pages 117-126]
  • Moradi Zirkohi, M. Optimum design of a fractional order PID Controller for AVR system to tune the terminal voltage of a synchronous generator using Cuckoo Optimization Algorithm [Volume 9, Issue 4, 2019, Pages 181-193]
  • Moradkhani, AliReza Experimental analysis of parameters needed for calculation of fracture toughness using surface cracks generated by Vickers test at different loads [Volume 3, Issue 3, 2013, Pages 41-51]
  • Moradkhani, B. Investigation of springback behavior of fibre-metal laminates using equivalent-layer and separate-layer theories [Volume 6, Issue 4, 2016, Pages 1-9]
  • Moravej, M. Experimental study of the effect of secondary flow on the efficiency of solar flat plate collector applied nanofluid [Volume 10, Issue 1, 2020, Pages 269-280]
  • Moravej Barzani, S. H. Limit cycle oscillations in swept wings based on fully intrinsic equations and considering the static stall effects [Volume 11, Issue 6, 2022, Pages 207-217]
  • Mortazavi, Seyed M. Investigation effect of wetted surface of cylindrical shell on vibrational frequency in different immersion depth numerically and experimentally [Volume 11, Issue 6, 2022, Pages 97-109]
  • Mosaffa, A.R. Thermodynamic analysis of using compressor in absorption heat transformers with ammonia-lithium nitrate and ammonia sodium thiocyanate as working fluids [Volume 11, Issue 3, 2021, Pages 221-234]
  • Mosavei, Seeyd E. Dimensional characteristic of glass/epoxy composite plate with edge notch under wet freeze-thaw cycles [Volume 10, Issue 3, 2020, Pages 219-231]
  • Mosayyebi- Dorche, Sobhan Application of differential transform method to determine natural frequencies of variable width Euler- Bernoulli beam with various support conditions [Volume 3, Issue 2, 2013, Pages 41-50]
  • Moshir Estekhareh, Seyyed Gh. Investigating the effect of induced centrifugal force resulting from duct geometry on the propagation speed of premixed flame using OpenFOAM software [Volume 13, Issue 1, 2023, Pages 111-124]
  • Moslemi Naeini, H. Calculation of springback with considering of hardening laws in the cold roll forming process of the steel plate [Volume 10, Issue 2, 2020, Pages 1-10]
  • Moslemi Naeini, H. Study of the Effect of Calibration Procedure on the Accuracy of the Phenomenological Ductile Fracture Criteria in Sheet Metal Forming [Volume 10, Issue 1, 2020, Pages 1-16]
  • Moslemi Naeini, H. Numerical and experimental investigation of deformation length in flexible roll forming process [Volume 11, Issue 6, 2022, Pages 1-14]
  • Mossavi, Seyed Mohamad Erfan Experimental and numerical study on the effects of friction and specimen dimension in split Hopkinson pressure bar [Volume 12, Issue 5, 2022, Pages 1-11]
  • Mostaan, H. An investigation on the microstructure and mechanical properties of dissimilar laser welded joint between AISI 430 ferritic stainless steel and AISI 2304 duplex stainless steel in order to optimize the fracture force of joints [Volume 10, Issue 3, 2020, Pages 158-147]
  • Mostafapour, K Design of Six-Component Force/Moment Sensor For Cavitation Tunnel [Volume 4, Issue 1, 2014, Pages 131-137]
  • Mostafavi, V. Active Vibration control and reduction of shear force of 5MW wind turbine with the help of gyroscope actuator [Volume 11, Issue 2, 2021, Pages 99-118]
  • Mostaghelchi, Mehdi Experimental analysis of the performance of a bidirectional single-unit air compressor with a semi-gear and rack mechanism in power transmission [Volume 13, Issue 2, 2023, Pages 129-142]
  • Mostajiri Abid, Kamran Numerical Investigation of the Electric Field Effects on the Flow and Forced Convection Heat Transfer over a Backward-acing Step [Volume 5, Issue 2, 2015, Pages 233-248]
  • Mostasharshahidi, Seyyed M. Modelling and optimizing effect of start of injection and blend of fuels on dual fuel diesel engine performance parameters by ANN and NSGA II [Volume 10, Issue 3, 2020, Pages 61-75]
  • Mostofizadeh, A.R. Investigating the effect of induced centrifugal force resulting from duct geometry on the propagation speed of premixed flame using OpenFOAM software [Volume 13, Issue 1, 2023, Pages 111-124]
  • Motaharifard, O. Aeroelastic nonlinear analysis of a high aspect ratio wing with store flow steady incompressible [Volume 6, Issue 2, 2016, Pages 259-269]
  • Motamedi, M. Modeling of Electrochemical Machining of Nickel-Based Single Crystal Super Alloy by Combining Numerical and Design of Experiments Methods [Volume 10, Issue 3, 2020, Pages 207-217]
  • Mousavi, ُSeyed M. Numerical and analytical investigation of shock train in a convergent divergent nozzle [Volume 7, Issue 1, 2017, Pages 101-112]
  • Mousavi, S. M. Numerical Analysis of Various Nanoparticles Size Effects on Thermal Performance of Nanofluid in A Microchannel Heat Sink [Volume 6, Issue 4, 2016, Pages 275-284]
  • Mousavipoor, R. Optimization of the Initial Blank Shape in hydroforming Double-Stepped Parts [Volume 5, Issue 3, 2015, Pages 137-149]
  • Movahedi, M. R. Experimental study of mechanical behavior of welded API X70 pipe steel using tensile and three point bend specimens [Volume 9, Issue 4, 2019, Pages 93-106]
  • Movahedzadeh, S. Enhanced two-dimensional differential transform method for solving homogenous Dirichlet problems; Application: heat transfer in bars [Volume 9, Issue 4, 2019, Pages 209-226]
  • Mozafar, Fatemeh Identification of the Failure Load of a Hyperelastic Body Considering the Location of the Failure [Volume 13, Issue 5, 2023, Pages 167-186]
  • Mozafareiyan, Seyed Saeed Investigation of nonlinear aero-elastic of isotropic cracked plate in supersonic flow [Volume 11, Issue 1, 2021, Pages 1-12]
  • Mozafari shamsi, M. Numerical Simulation of Mixing Two Fluids of Different Viscosities in a Micromixer at Different Aspect Ratios of Stirrer by LBM [Volume 9, Issue 1, 2019, Pages 187-202]
  • Mozaffari, A. Non-linear finite element low-velocity impact response analysis of a viscoelastic composite plate, employing a layerwise theory [Volume 6, Issue 3, 2016, Pages 97-108]
  • Mozaffari, M. H. Effect of Shell Surface Texture Depth on the Steady State Performance of Noncircular Two Lobe Gas Journal Bearings [Volume 11, Issue 6, 2022, Pages 273-286]
  • Mozaffari, Mohammad Hossein Solving the inverse problem of identifying internal boundaries and estimating the mechanical properties of materials using optimization methods in materials with variable modulus of elasticity [Volume 13, Issue 2, 2023, Pages 27-39]
  • Musavi, S. H. On the effects of cryogenic cooling and lubrication with Nanofluid on surface roughness and tool wear in A286 superalloys turning [Volume 7, Issue 4, 2018, Pages 73-85]

N

  • Nabati, A. Development of an applied relationship for pressure drop estimation in tri-cone drill bit using Bingham rheological model [Volume 11, Issue 6, 2022, Pages 45-57]
  • Naddaf Oskouei, A. Primary creep analysis of nanocomposite thick-walled sphere under thermal, magnetic and mechanical loading using viscoelastic Bergurs model [Volume 6, Issue 3, 2016, Pages 163-174]
  • Naddaf Oskouei, A.R. Presenting a modified theory and analytical investigation of projectile penetration into ceramic - metal semi-infinite targets [Volume 9, Issue 2, 2019, Pages 31-45]
  • Naddaf Oskouei, A.R. Evaluation of the projectile penetration models in the metal and ceramic targets [Volume 9, Issue 4, 2019, Pages 77-92]
  • Naddaf Oskouei, A.R. Analytical, experimental and numerical investigation of ballistic performance of ceramic composite targets [Volume 10, Issue 3, 2020, Pages 31-45]
  • Naddaf Oskouei, A.R. An analytical model Presentation and experimental investigation of the penetration ‎depth of the rigid blunt projectile on the perforated metal plate [Volume 10, Issue 4, 2021, Pages 241-251]
  • Naderi, A.A. Size-dependent vibration of rotating rayleigh microbeams with variable cross-section in complex environments [Volume 11, Issue 6, 2022, Pages 159-171]
  • Naderi, R. A Numerical Modeling For Craters Produced By Soil Explosion Using SPH Method [Volume 8, Issue 4, 2019, Pages 53-66]
  • Naghian, M. Using Collocation Discrete Least Squares Meshless method in solving governing equations for non-Newtonian fluids by Herschel- Bulkley model [Volume 11, Issue 2, 2021, Pages 247-259]
  • Nahvi, A. Finite Element Analysis of Heat Distribution in Weld Parts by Adaptive Mesh Method [Volume 7, Issue 1, 2017, Pages 135-145]
  • Najafi, F. Gear Fault Detection Based on Best Feature Selection by Particle Swarm Optimization [Volume 8, Issue 3, 2018, Pages 49-64]
  • Najafi, M. Force Convection Heat Transfer from a Stationary circular Cylinder in Non-Newtonian Fluids [Volume 5, Issue 4, 2016, Pages 229-242]
  • Najafi, M. Experimental study of the influence of mixing method of nanoclay on mechanical properties of polymer composites and fiber metal laminates [Volume 7, Issue 2, 2017, Pages 63-80]
  • Najafi, M. Penetration of Armored Piercing Projectile into Ultra-High Strength Steel Targets: Numerical and Experimental Investigation [Volume 8, Issue 2, 2018, Pages 81-92]
  • Najafi, M. Numerical and Experimental Investigation of Structural Integrity in Armored Vehicle Due to Explosive Loading [Volume 8, Issue 3, 2018, Pages 193-204]
  • Najafi, Mahsa Free Vibration Analysis of Piezoelectric Nanobeam Based on a 2ِِD- Formulation and Non-local Elasticity Theory [Volume 12, Issue 5, 2022, Pages 59-72]
  • Najafi, Moslem Effects of the rigid disk attached to the edges of the cylindrical shells on the natural frequencies of different modes [Volume 13, Issue 4, 2023, Pages 15-37]
  • Najafi, M. R. Investigation effect of wetted surface of cylindrical shell on vibrational frequency in different immersion depth numerically and experimentally [Volume 11, Issue 6, 2022, Pages 97-109]
  • Najafi, M. R. Assesing whipping vibration on damage floating life of Catamaran using one way fluid-structure interaction method [Volume 12, Issue 1, 2022, Pages 21-33]
  • Najafizadeh, Mohammadmahdi Solution of the Characteristic Frequency Equations of Levy-type Sandwich Panels with Auxetic Honeycomb Core based on the Improved Reddy’s Third-order Theory [Volume 11, Issue 1, 2021, Pages 291-310]
  • Najafpoor, M. Noise Analysis & Flow Simulation in Angle Globe Valve with Different Cages [Volume 8, Issue 4, 2019, Pages 261-271]
  • Najibfar, A. Thermodynamic analysis of using compressor in absorption heat transformers with ammonia-lithium nitrate and ammonia sodium thiocyanate as working fluids [Volume 11, Issue 3, 2021, Pages 221-234]
  • Nakhaee, M. Experimental and numerical investigation of blade shape effect on the Hunter wind turbines efficiency [Volume 6, Issue 2, 2016, Pages 329-339]
  • Namdarnia, F. Experimental study of the effect of secondary flow on the efficiency of solar flat plate collector applied nanofluid [Volume 10, Issue 1, 2020, Pages 269-280]
  • Nami, M.H. A recursive algorithm to exploit a multiple-arm space manipulator equations of motion by the Lagrange method in terms of quasi-coordinates [Volume 9, Issue 4, 2019, Pages 15-26]
  • Naofal, J. Calculation of springback with considering of hardening laws in the cold roll forming process of the steel plate [Volume 10, Issue 2, 2020, Pages 1-10]
  • Nariman-zadeh, Nader Developing a Multi-Objective Game Theoretic Design of Path-Generating Planar Mechanism [Volume 13, Issue 6, 2024, Pages 17-29]
  • Nariman Zadeh, N. Thermodynamic analysis and Pareto optimization of hybrid system consisting of biomass gasification, solid oxide fuel cell and gas turbine [Volume 7, Issue 1, 2017, Pages 113-133]
  • Naseri, Reza Experimental evaluation of back-pressure effect on workability and mechanical properties of commercially pure titanium in cold-ECAP process [Volume 12, Issue 6, 2023, Pages 67-81]
  • Naseri, Reza Solving the inverse problem of identifying internal boundaries and estimating the mechanical properties of materials using optimization methods in materials with variable modulus of elasticity [Volume 13, Issue 2, 2023, Pages 27-39]
  • Naserinejad, K. Dynamic Response of a Double Beam Interconnected by a Viscoelastic Layer Due to a Moving Vehicle with a Constant Acceleration [Volume 9, Issue 1, 2019, Pages 1-13]
  • Nasiri, M. Effect of state feedback controller on dynamic behavior of a rotor supported by active magnetic bearings [Volume 11, Issue 6, 2022, Pages 15-26]
  • Nasiri, S. A review on the underwater explosive forming [Volume 11, Issue 6, 2022, Pages 59-83]
  • Nasri, H. Design, optimization and manufacture of exhaust manifold for a outboard spark ignition engine [Volume 10, Issue 1, 2020, Pages 253-268]
  • Nasrollahi, A. Reliability-Based Design Optimization of Columns under Buckling Load [Volume 11, Issue 5, 2021, Pages 49-62]
  • Nasrollahzadeh, Kourosh Prediction of compressive strength of FRP-confined concrete square columns using fuzzy logic approach [Volume 4, Issue 4, 2015, Pages 45-64]
  • Nasseroleslami, A. Modal Analysis of a Vertical Rectangular Plate Semi-Submerged in Water with Different Boundary Conditions [Volume 9, Issue 1, 2019, Pages 85-96]
  • Nategh, V. Elastic-Plastic Modeling of the Residual Stresses Caused by Laser Beam Welding in Aerospace Structures [Volume 5, Issue 2, 2015, Pages 153-162]
  • Nateghi, Mohammad Reza Numerical investigation of the blades number effect on the bipolar noise radiation level caused by the high skew propeller [Volume 13, Issue 3, 2023, Pages 143-158]
  • Nayeb, H Presenting an analytical relation to determine frequency and mode shape of stepped hinged beam resting on elastic foundation [Volume 4, Issue 3, 2014, Pages 57-64]
  • Nayebi, H Presenting an analytical relation to determine frequency and mode shape of stepped hinged beam resting on elastic foundation [Volume 4, Issue 3, 2014, Pages 57-64]
  • Nazaralizadeh, S. Effect of repair welds on the microstructure and mechanical properties of 9Cr1Mo welding joint [Volume 10, Issue 2, 2020, Pages 29-44]
  • Nazari, M Changing the dynamics of a system by using finite duration inputs: Application to cancer modeling and treatment [Volume 4, Issue 1, 2014, Pages 79-91]
  • Nazari, M روش شبکه‌بولتزمن حرارتی مرتبه دوم در انتقال حرارت جابه¬جایی آزاد در محفظه¬های غیرمربعی [Volume 4, Issue 3, 2014, Pages 147-158]
  • Nazari, M. Applying ‘SHARP’ Interface Scheme in the Immersed Boundary–Lattice Boltzmann Method [Volume 4, Issue 4, 2015, Pages 157-174]
  • Nazari, M. Fuzzy optimal treatment of AIDS-related non-Hodgkin’s cancer [Volume 9, Issue 2, 2019, Pages 211-225]
  • Nazari, M. Fuzzy optimal treatment of AIDS-related non-Hodgkin’s cancer [Volume 9, Issue 2, 2019, Pages 211-225]
  • Nazari, M. Mathematical model of a vacuum box electric furnace for online computation: A nonlinear ordinary differential equation model and experimental verification [Volume 12, Issue 1, 2022, Pages 145-157]
  • Nazari, M. Mathematical model of a vacuum box electric furnace for online computation: A nonlinear ordinary differential equation model and experimental verification [Volume 12, Issue 1, 2022, Pages 145-157]
  • Nazari, M. B An analytical solution for asymmetric non-Fourier heat conduction in a long solid orthotropic cylinder [Volume 9, Issue 3, 2019, Pages 95-108]
  • Nazari, M. B. Evaluation of the stress intensity factor for circumferential cracked cylinders under non-classical thermal shock [Volume 5, Issue 3, 2015, Pages 101-112]
  • Nazari, M. B. Crack analysis in diffusion-generalized thermoelasticity problems using the extended finite element method [Volume 11, Issue 5, 2021, Pages 63-82]
  • Nazari, Mohsen Tissue Temperature Control in a Bio-Heat Transfer Equation with the Conjugate Gradient Method [Volume 13, Issue 3, 2023, Pages 159-170]
  • Nazari, M. R. Experimental Investigation of the Forced Convective Heat Transfer of hybrid Cu / Fe3O4 Nanofluids [Volume 8, Issue 4, 2019, Pages 229-238]
  • Nazari, M.R. Experimental study of the effect of position and intensity of a constant magnetic field on the forced convection heat transfer of Fe2O3 / water nanofluid in the developing thermal region [Volume 11, Issue 1, 2021, Pages 43-58]
  • Nazari, S. Experimental Investigation of wake on an elliptic cylinder in the presence of tripping wire [Volume 7, Issue 2, 2017, Pages 149-163]
  • Nazarian Shahrbabaki, A. Numerical Study of Dielectric Barrier Discharge (DBD) Plasma Actuators on Separation Control of Supersonic Flow [Volume 11, Issue 4, 2021, Pages 133-148]
  • Nazari Maryam Abadi, Davood Optimal Intelligent Control for Glucose Regulation [Volume 2, Issue 3, 2012, Pages 71-79]
  • Nazemnezhad, R. Investigating simultaneous effects of tensile-compressive and shear moduli of van der Waals interactions on the vibration of bilayer graphene nanoribbons for different boundary condition [Volume 6, Issue 2, 2016, Pages 295-310]
  • Nazemnezhad, R. Surface Energy Effect on Free Axial Vibration of Cracked Nanorods Made of Functionally Graded Materials Based on Rayleigh Theory [Volume 12, Issue 4, 2022, Pages 103-116]
  • Negarestani, A. Optimization of End milling process for minimizing surface roughness with combined artificial Neural Network and Genetic Algorithm [Volume 7, Issue 2, 2017, Pages 81-91]
  • Nehsat, A. R. Experimental Investigation of Effects of Split Blended Winglet at Tip Vortex Structure of Micro-Aerial Vehicle with Hot-Wire Anemometry [Volume 8, Issue 2, 2018, Pages 193-204]
  • Nejati, V. Numerical investigation of two-phase nanofluid flow in square cavity with inclined wall under different magnetic field [Volume 13, Issue 1, 2023, Pages 125-136]
  • Nemati, M. Investigation of Magnetic Field Effect on Nanofluid Mixed Convection inside Lid-Driven K-shaped Enclosure Using Lattice Boltzmann Method [Volume 8, Issue 1, 2018, Pages 111-126]
  • Nemati, M. The effect of changing the position of the hot wall and increasing the amplitude and number of oscillations of wavy wall on the flow and heat transfer of nanofluid inside the channel in the presence of magnetic field [Volume 10, Issue 2, 2020, Pages 219-236]
  • Nematzadeh, F. An investigation on the microstructure and mechanical properties of dissimilar laser welded joint between AISI 430 ferritic stainless steel and AISI 2304 duplex stainless steel in order to optimize the fracture force of joints [Volume 10, Issue 3, 2020, Pages 158-147]
  • Nezamabadi, Alireza Solution of the Characteristic Frequency Equations of Levy-type Sandwich Panels with Auxetic Honeycomb Core based on the Improved Reddy’s Third-order Theory [Volume 11, Issue 1, 2021, Pages 291-310]
  • Nezamabadi, Alireza An experimental investigation on the influence of geometrical configuration of copper patches on mechanical strength of cracked titanium components using diffusion method [Volume 13, Issue 3, 2023, Pages 85-96]
  • Nezamabadi, A.R. Experimental Analysis on the Geometric Parameters of the Composite Metal Matrix Patch to Repair Cracked Aluminum Part [Volume 11, Issue 3, 2021, Pages 85-96]
  • Nezami, M. Supersonic Flutter of a Honeycomb Sandwich Panel with Cermet Constrained Layer under Moving Load Configuration [Volume 9, Issue 4, 2019, Pages 195-208]
  • Nezamivand Chegini, S. Gear Fault Detection Based on Best Feature Selection by Particle Swarm Optimization [Volume 8, Issue 3, 2018, Pages 49-64]
  • Nezamivand Chegini, S. Noise Removal from the Vibration Signals of the Rotating Machinery Using the Empirical Wavelet Transform and the Conventional Thresholding Methods [Volume 9, Issue 1, 2019, Pages 111-124]
  • Nezamivand Chegini, S. A New Intelligent Method for Bearing Fault Detection Based on Co-integration Concept and Selecting the Optimal Feature Set at Time-Varying Speed Conditions [Volume 9, Issue 4, 2019, Pages 41-57]
  • Niaz, M. Dynamic response of thick plates under excitation of a moving mass utilizing BCOPs [Volume 8, Issue 3, 2018, Pages 165-175]
  • Niazmand, H. Numerical and experimental study of natural gas preheating effects on the soot formation, flame luminosity and NO emission [Volume 7, Issue 1, 2017, Pages 79-90]
  • Niazmand, H. Numerical study of the effects of aluminum particle additives in adsorbent bed on the performance of adsorption refrigeration systems [Volume 8, Issue 3, 2018, Pages 261-275]
  • Niazmand, H. Performance evaluation of Ferric oxide (Fe3O4) and Graphene nanoplatelet (GNP) nanoparticles in solar steam generation [Volume 9, Issue 2, 2019, Pages 181-196]
  • Niazmand, H. Optimization of the CHP System, Investigation of its Pollution and Economic Costs in Ideal and Real Conditions in terms of Local and Global Approach [Volume 10, Issue 1, 2020, Pages 161-176]
  • Niazmand, H. Optimal design of a three-outlet channel with specified outlet flow rates using the topology optimization method [Volume 11, Issue 1, 2021, Pages 153-168]
  • Niazmand, H. Numerical modeling of adsorption desalination and investigation evaporator pipe lenght effect on desalinated water [Volume 12, Issue 4, 2022, Pages 145-157]
  • Niazmand, H. Reduce the hot-spot temperature of an oil transformer using a heat pipe [Volume 13, Issue 1, 2023, Pages 87-97]
  • Niazmand, hamid On the Effect of Blood Flow and Oxygen Mass Transfer on Development of Atherosclerosis [Volume 4, Issue 2, 2014, Pages 119-132]
  • Niazmand, Hamid Numerical simulation of electroosmotic flow in two micropumps with series connection to evaluate the increase in performance of integrated micropump [Volume 12, Issue 5, 2022, Pages 237-251]
  • Nikandish, P. Evaluation of the Effective Variables on the Performance of the Hydraulic Pilot Valve Including the Orifice with the Fixed and Moving Parallel Surfaces [Volume 13, Issue 1, 2023, Pages 57-69]
  • Nikian, M. Modeling and analysis of total site cogeneration of heat and power from an exergoeconomic approach in a 100MW case study [Volume 11, Issue 5, 2021, Pages 247-258]
  • Nikkhah-Bahrami, M. Dynamic Behavior of Articulated Pipes Conveying Fluid With Harmonic Velocity Using the Method of Multiple time scales [Volume 11, Issue 3, 2021, Pages 53-70]
  • Nikkhoo, A. Dynamic response of thick plates under excitation of a moving mass utilizing BCOPs [Volume 8, Issue 3, 2018, Pages 165-175]
  • Nikkhoo, A. Identification of crack in beams under moving forces using Hilbert-Huang transform [Volume 11, Issue 6, 2022, Pages 173-185]
  • Nikmehr, O. Numerical calculation of the shear stresses in torsion problem of prismatic bars using collocated discrete least squares method [Volume 5, Issue 4, 2016, Pages 47-54]
  • Nikoei, S. Static analysis of laminated composite smart shells with considering the effect of the shear piezoelectric actuator using the isogeometric approach [Volume 10, Issue 4, 2021, Pages 53-66]
  • Nikoobin, Amin Investigating the effects of cross section asymmetry on the vibration behavior of the nonlinear nanoresonator under internal resonance conditions [Volume 13, Issue 4, 2023, Pages 53-66]
  • Nikpey, P. Dynamic Modeling and Controller Design for a Space Vehicle with Fuel Sloshing [Volume 11, Issue 2, 2021, Pages 25-40]
  • Nikpour, N. Seismic characteristics of tunnel form concrete buildings with irregular plan [Volume 5, Issue 3, 2015, Pages 1-15]
  • Nikranjbar, A. Model Reference Adaptive Control with Artificial Neural Network Compensator of 6 DOF Autonomous Underwater Vehicle [Volume 7, Issue 3, 2017, Pages 165-184]
  • Nikzare, Javad Experimental and numerical analysis of the effect of using two perforated plates in front of the target against ballistic impact [Volume 12, Issue 5, 2022, Pages 175-187]
  • Nili-Ahmadabadi, M. One-Dimensional Design of Centrifugal Compressor of a Turo-shaft Engine with Optimization of 90-Degree Bend Duct between Radial and Axial Diffuser [Volume 5, Issue 3, 2015, Pages 65-77]
  • Nili-Ahmadabadi, M. بررسی عملکرد فن گریز از مرکز یک توربین سرمایشی با استفاده از شبیه‌سازی عددی [Volume 6, Issue 2, 2016, Pages 245-257]
  • Nili-Ahmadabadi, M. Numerical Simulation and Visualization of Gas-Metal Powder Flow in Laser Cladding Process [Volume 11, Issue 5, 2021, Pages 183-197]
  • Nili-Ahmadabadi, Mahdi Numerical investigation of the effects of Helmholtz resonator and primary flow oscillations on subsonic ejector performance [Volume 13, Issue 5, 2023, Pages 19-42]
  • Nimafar, M. Numerical study of the effect of phase change materials containing multi-walled carbon nanotubes on improving the heat sink performance of electrical equipment [Volume 13, Issue 1, 2023, Pages 25-41]
  • Norouzi, B. Numerical calculation of the shear stresses in torsion problem of prismatic bars using collocated discrete least squares method [Volume 5, Issue 4, 2016, Pages 47-54]
  • Norouzi, M. experimentally study of thermal resistance coefficient in closed loop pulsating heat pipe and the effect of filling ratio and evaporator to condenser length ratio on it [Volume 12, Issue 4, 2022, Pages 175-187]
  • Norouzi, Mahmood Investigation of Non Newtonian fluid effects in unsteady flow of pipe system [Volume 5, Issue 1, 2015, Pages 211-219]
  • Norouzi, R. Vibration analysis of continuous rotor-bearing system under various defects of unbalances [Volume 7, Issue 4, 2018, Pages 223-237]
  • Norozi, M. Parametric Analysis of Subsurface Hydrofoil with Boundary Elements Method [Volume 6, Issue 2, 2016, Pages 213-226]
  • Noruzi, M.S. Aerothermal Analysis of Rotation and Rotational Buoyancy Effect on Internal Cooling of Gas Turbine Blade- An Experimental study [Volume 8, Issue 3, 2018, Pages 277-288]
  • Noruzshamsian, O. Design of a Micro-Separator for Circulating Tumor Cells (CTCs) from Blood Flow Using Hybrid Pinched Flow Fractionation (PFF) and Dielectrophoresis Methods [Volume 10, Issue 1, 2020, Pages 281-296]
  • Nosraty, H. The Effect of Bending Deflection on the Strength Degradation of Homogenous and Hybrid Composites Reinforced with Brittle and Ductile Fibers [Volume 6, Issue 1, 2016, Pages 11-18]
  • Nouhi, Ehsan Prediction of compressive strength of FRP-confined concrete square columns using fuzzy logic approach [Volume 4, Issue 4, 2015, Pages 45-64]
  • Nourani, Amir Analytical and Numerical Solution for Auxetic Stent with Re-entrant Geometry and its Multi-Objective Optimization [Volume 12, Issue 6, 2023, Pages 125-137]
  • Nourazar, S. Investigation of Internal Flow of Binary Gas in a Rotating Cylinder Using Direct Simulation Monte-Carlo (DSMC) [Volume 5, Issue 2, 2015, Pages 261-270]
  • Nourazar, S. Numerical study of effect of inlet flow turbulent on trajectory and breakup of liquid jet in crossflow [Volume 9, Issue 2, 2019, Pages 167-179]
  • Nourbakhsh, A. Investigation of natural convection heat transfer of viscoplastic nanofluids-Casson model in a square enclosure [Volume 11, Issue 4, 2021, Pages 165-178]
  • Nouri, H. Statistical analysis and multi-objective optimization of tungsten carbide alloy wirecut process using Taguchi method and genetic algorithm [Volume 12, Issue 3, 2022, Pages 69-87]
  • Nouri, M. An Experimental Investigation into Width Reduction Effect on the Efficiency of Piezopolymer Vibration Energy Harvester [Volume 7, Issue 3, 2017, Pages 41-51]
  • Nouri, N. M. Experimental investigation on the effect of preprocessing in fabrication of superhydrphobic surfaces on laminar drag reduction [Volume 8, Issue 4, 2019, Pages 239-248]
  • Nouri, N.M Design of Six-Component Force/Moment Sensor For Cavitation Tunnel [Volume 4, Issue 1, 2014, Pages 131-137]
  • Nouri Niyaraki, Meysam Optimization of Shear Strength of 420 Stainless Steel Brazing Joints Using BNi-2 by Response Surface Methodology [Volume 13, Issue 6, 2024, Pages 47-58]
  • Nouroozi, Mahdi A Three-Dimensional Potential-Based analysis for Partial cavitating Flow around Projectiles with Various Head Using BEM [Volume 13, Issue 6, 2024, Pages 153-167]
  • Nourshad, H. Simulation of baffle effects on sloshing in model aircraft fuel tank [Volume 9, Issue 2, 2019, Pages 275-287]
  • N. Z. Moghaddam, N. Channels Flow Modeling by Using Isogeometric Analysis [Volume 5, Issue 4, 2016, Pages 15-26]

O

  • Oliazadeh, P. Experimental investigation on natural frequencies of thin rectangular plates using contact and non-contact methods [Volume 8, Issue 1, 2018, Pages 1-11]
  • Omidi kashani, Behzad Experimental analysis of the performance of a bidirectional single-unit air compressor with a semi-gear and rack mechanism in power transmission [Volume 13, Issue 2, 2023, Pages 129-142]
  • Omidvar, A. Numerical investigation of heat transfer rate around isothermal elliptical cylinder under pulsating flow [Volume 8, Issue 2, 2018, Pages 161-176]
  • Ommi, F. Numerical study of effect of inlet flow turbulent on trajectory and breakup of liquid jet in crossflow [Volume 9, Issue 2, 2019, Pages 167-179]
  • Ommi, F. Numerical study of flow characteristics in a single-element Lean Direct Injection (LDI) combustion chamber [Volume 10, Issue 4, 2021, Pages 287-302]
  • Ommi, F. Identification of the Droplet Group Combustion Formation Region by the Flame Index Parameter in the Laminar Counterflow Spray [Volume 11, Issue 1, 2021, Pages 212-199]
  • Ommi, F. Experimental study of the effects of adding methylated homopolymer to gasoline on the engine performance and pollutant emissions [Volume 11, Issue 5, 2021, Pages 199-210]
  • Onsorynezhad, S. Exact free vibration analysis of sector plates coupled with piezoelectric layers using first-order shear deformation plate theory [Volume 6, Issue 4, 2016, Pages 125-138]
  • Ordokhani, Y. Control a class of fractional-order systems with delay in a specified sector [Volume 9, Issue 3, 2019, Pages 51-63]
  • Otadolajam, P. A New Adaptive Fuzzy Integral Sliding Mode Controller Design for Electrically Driven Nonholonomic Wheeled Mobile Robots [Volume 6, Issue 2, 2016, Pages 41-59]
  • Ozgoli, Sajad Time-varying delay compensation by communication disturbance observer for teleoperation system by considering model uncertainty [Volume 4, Issue 4, 2015, Pages 143-156]

P

  • Pachenari, M.H. Non-linear finite element low-velocity impact response analysis of a viscoelastic composite plate, employing a layerwise theory [Volume 6, Issue 3, 2016, Pages 97-108]
  • Pahamli, Y. Effect of increasing number and arrangement of hot fluid tube on melting behavior of Phase Change Material in a triplex tube heat exchanger [Volume 6, Issue 4, 2016, Pages 249-262]
  • Pahange, H. Simulation, analysis and optimization of airplane wing leading edge structure against bird strike [Volume 6, Issue 3, 2016, Pages 17-32]
  • Paknejad, R. The effects of arbitrary boundary conditions on a laminated composite plate response subjected to large mass & low velocity impact [Volume 8, Issue 1, 2018, Pages 35-49]
  • Pakravan, H. A. Investigating the influencing parameters on blood flow of grafted vessel in coronary artery bypass surgery [Volume 10, Issue 4, 2021, Pages 317-329]
  • Pakrooyan, Alireza Solution of the Characteristic Frequency Equations of Levy-type Sandwich Panels with Auxetic Honeycomb Core based on the Improved Reddy’s Third-order Theory [Volume 11, Issue 1, 2021, Pages 291-310]
  • Panahizadeh, V. Numerical and Experimental Analysis of Spring-back Defect in Flexible Roll Forming Process using Anisotropic Yield Criteria [Volume 11, Issue 4, 2021, Pages 93-105]
  • Parhikhteh, M. Optimal Control of Skid Steer Wheeled Mobile Robots by Analytical Approach [Volume 7, Issue 4, 2018, Pages 135-145]
  • Parhizkar, H. Flow field modeling and performance improving of an axial turbine's using Adjoint method [Volume 8, Issue 1, 2018, Pages 127-133]
  • Parhizkar, H. Reduced pressure drop in the air inlet of a cruise missile using adjoint optimization [Volume 10, Issue 2, 2020, Pages 205-217]
  • Parhizkar, H. Modeling and numerical analysis of a turbine stator vane performance from the second law of thermodynamics view point [Volume 11, Issue 1, 2021, Pages 185-198]
  • Parsa, Sina Investigating the Effect of Opening Aspect Ratio and Combustion Source Conditions on Behavior of Backdraft Phenomenon by Large Eddy Simulation [Volume 11, Issue 3, 2021, Pages 165-179]
  • Parsaei, M. Numerical solution to the multi- layer core- annular flow of two fluids with different viscosities using Spectral Element Method [Volume 8, Issue 4, 2019, Pages 249-260]
  • Partabian, lieyla Experimental study of the effect of secondary flow on the efficiency of solar flat plate collector applied nanofluid [Volume 10, Issue 1, 2020, Pages 269-280]
  • Parvaz, H. Analytical and numerical investigation of reaction forces in fixturing of the rigid workpiece with polyhedral geometry [Volume 10, Issue 1, 2020, Pages 17-29]
  • Parvaz, H. Theoretical and experimental analysis of jamming of workpiece in the fixture by using the block and palm study [Volume 10, Issue 2, 2020, Pages 45-58]
  • Parvaz, H. Experimental investigation of the jamming phenomenon in fixturing of workpiece using the peg-in-hole mechanism [Volume 10, Issue 3, 2020, Pages 77-89]
  • Parvaz, Hadi Theoretical and Numerical Analysis of deformation in fixture body plates [Volume 12, Issue 3, 2022, Pages 13-32]
  • Pasandideh-fard, M. Using of AUSM+ Method for Improving the Results and Reducing Numerical Eror of Jameson's 2D Finite Volume Technique in Turbine Stator Blades [Volume 5, Issue 4, 2016, Pages 201-212]
  • Pasandideh-fard, Mahmoud A Three-Dimensional Potential-Based analysis for Partial cavitating Flow around Projectiles with Various Head Using BEM [Volume 13, Issue 6, 2024, Pages 153-167]
  • Pasandidehfard, M. Evaluate the Performance of the Scalar and Cusp Central Difference Schemes, AUSM+ Upwind Method in Very Low Mach Number up to Supersonic Flow [Volume 6, Issue 1, 2016, Pages 225-237]
  • Pasandidehfard, M. Numerical simulation of Lucid spherical turbine and investigation the effect of different parameters of blades on its performance [Volume 12, Issue 1, 2022, Pages 115-131]
  • Pasandidehfard, M. Numerical investigating of using the air duct and body side curvature effects on the Tara aerodynamic performance [Volume 13, Issue 1, 2023, Pages 71-86]
  • Pasandideh Fard, M. Investigation of Wave Characteristics and Wave Resistance of an Underwater vehicle with Control Surface Near the Free Surface [Volume 12, Issue 2, 2022, Pages 65-79]
  • Pasandideh Fard, Mahmoud Numerical Simulation of Magneto-Hydrodynamics Effect on Supersonic Flow of A Projectile [Volume 13, Issue 5, 2023, Pages 43-57]
  • Pasandideh-Fard, M. Parametric Analysis of Subsurface Hydrofoil with Boundary Elements Method [Volume 6, Issue 2, 2016, Pages 213-226]
  • PasandidehFard, M. Modification of k-e-v 2 Turbulence Model for Turbulent Accelerated Flows in Pipes [Volume 7, Issue 2, 2017, Pages 215-228]
  • Pasdar Shahri, H. Influence of air inlet diffuser layout on indoor air quality and occupants’ thermal comfort in a room with baseboard heating system [Volume 6, Issue 3, 2016, Pages 261-270]
  • Pashaei, M. H. Indirect Damage detection in bridge using transmissibility measurements from the response of a passing vehicle [Volume 9, Issue 4, 2019, Pages 59-76]
  • Pashazadeh, S. Enhancing numerical stability in simulation of viscoelastic fluid flows at high weissenberg number problem [Volume 9, Issue 3, 2019, Pages 217-230]
  • Pashmforoush, F. Experimental study of subsurface damage and material removal mechanisms in abrasive waterjet milling process of aluminum oxide ceramic [Volume 10, Issue 2, 2020, Pages 253-265]
  • Passandideh-Fard, M. Numerical Investigation of Polygonal Hydraulic Jump Formation Mechanism and its Flow Structure [Volume 9, Issue 3, 2019, Pages 191-203]
  • Payganeh, Gh. Investigation of the effects of geometric parameters of layers on the formability of Aluminum/Polyurethane/Aluminum sandwich sheets [Volume 6, Issue 1, 2016, Pages 61-71]
  • Permeh, M. GTN Damage Model Parameters for Ductile Fracture Simulation in Aluminum Alloy 5083-O [Volume 6, Issue 1, 2016, Pages 129-142]
  • Pirkandi, J. Design and Numerical Investigation of a Small Scale Solar Chimney Using Computational Fluid Dynamics [Volume 6, Issue 3, 2016, Pages 271-280]
  • Pirkandi, J. Simulation of baffle effects on sloshing in model aircraft fuel tank [Volume 9, Issue 2, 2019, Pages 275-287]
  • Pirkandi, J. Modeling and numerical analysis of a turbine stator vane performance from the second law of thermodynamics view point [Volume 11, Issue 1, 2021, Pages 185-198]
  • Pirkandi, J. Modeling of Solar Desalination Equipped with Phase Change Materials by Air Humidification and Dehumidification Technique [Volume 12, Issue 4, 2022, Pages 159-174]
  • Pirkandi, Jamasb Comparison of PEM Fuel Cell Performance with Metal Foam and Parallel Channel as Flow-Field Gas Distributor [Volume 4, Issue 3, 2014, Pages 123-136]
  • Pirkandi, Jamasb Investigation of the Effect of Noise Parameters of Jet Using Acoustic Load Calculation Algorithm on the Launch Vehicle During Lift-Off [Volume 13, Issue 3, 2023, Pages 17-27]
  • Pirmohammad, S. Study on the collapse behavior of multi-cell conical structures and their optimization using artificial neural networks [Volume 7, Issue 2, 2017, Pages 111-127]
  • Pirmohammad, S. Comparison of energy absorption performance of multi-walled square and circular structures using COPRAS method and optimization of circular structures using RSM [Volume 7, Issue 3, 2017, Pages 133-147]
  • Pirmohammad, S. Numerical analysis of a new specimen for conducting fracture experiments under mixed mode I/III loading [Volume 8, Issue 3, 2018, Pages 247-259]
  • Pishbin, Seyyed I. Experimental Investigation on Low Swirl Premixed Combustion and Effects of Geometrical Parameters on Its Performance [Volume 5, Issue 2, 2015, Pages 191-204]
  • Pishbin, S.I. Analytical and Experimental Investigation for Nonlinear Behavior of Flange Joints Under Axial and Lateral Loading [Volume 6, Issue 3, 2016, Pages 43-54]
  • Pishkar, I. Study of the effect of nano-fluid in the diesel-cooled diesel engine oil cooler [Volume 8, Issue 2, 2018, Pages 221-233]
  • Poorveis, D. Study on Free Vibration of Buckled Cracked Plates Using Differential Quadrature Element Method [Volume 8, Issue 4, 2019, Pages 67-83]
  • Pormahmod, N. Influence of gas channels and Gas Diffusion Layers configuration on the performance of Polymer Electrolyte Membrane Fuel Cell [Volume 9, Issue 3, 2019, Pages 249-263]
  • Pormahmod, Nader Investigating the effect of the geometry of gas injection channels on the performance and dynamic behavior of the polymer electrolyte membrane fuel cell [Volume 13, Issue 2, 2023, Pages 121-128]
  • Pour, M. Identifying Process Damping of Turning Process Using Time Series Analysis [Volume 5, Issue 4, 2016, Pages 35-45]
  • Pourabdollah, Davoud Investigation of the Effect of Noise Parameters of Jet Using Acoustic Load Calculation Algorithm on the Launch Vehicle During Lift-Off [Volume 13, Issue 3, 2023, Pages 17-27]
  • Pourghasemi Hanza, Sadegh Theoretical and Experimental Behavior Analysis of Continuous Soft Robots Consisting of Fiber-Reinforced Actuators [Volume 12, Issue 5, 2022, Pages 161-173]
  • Pourhassan, Ehsan Evaluation of multi-effect distillation unit (MED) for desalination of Iranshahr steam power plant effluents using heat losses of boiler blowdown [Volume 13, Issue 6, 2024, Pages 89-102]
  • Pourkamali Anaraki, A. Experimental analysis of buckling strength of notched aluminum plates reinforced using fiber metal laminate (FML) patches [Volume 6, Issue 1, 2016, Pages 117-127]
  • Pourkariman, Fatemeh Workspace of 3-RRR parallel robot using the combination of interval analysis and refinement methods by considering the limitation of active joints movement [Volume 13, Issue 3, 2023, Pages 29-43]
  • Pourmahommd, N. The effect of aspect ratio of model to prtotypein the load acting on cylinderin free surface problems [Volume 6, Issue 4, 2016, Pages 317-328]
  • Pourmoayed, Alireza The Effects of Magnetic Field on The Convective Heat Transfer Around a Solid Cylinder Wrapped by a Porous Sheath [Volume 4, Issue 4, 2015, Pages 191-205]
  • Pourmoayed, A. R. Local entropy generation analysis for a single slope solar still (Numerical investigations) [Volume 7, Issue 4, 2018, Pages 279-291]
  • Pourmoayed, A.R. A new model for two-phase flow in a solar still improved by a porous layer [Volume 8, Issue 1, 2018, Pages 171-182]
  • Pourmoayed, A.R. Free vibration analysis of functionally graded beam with transverse crack using Timoshenko and higher order shear deformation theory [Volume 11, Issue 1, 2021, Pages 275-289]
  • Poursadeghfard, M. Numerical and Experimental Investigation into Heat Transfer Process in a Fluidized Bed of Alumina Powder [Volume 6, Issue 4, 2016, Pages 263-274]
  • Poursina, M. Shape Optimization of Preform Dies in two-stage Near Net Forging [Volume 4, Issue 4, 2015, Pages 65-73]
  • Pourzamani, E. Reliability Analysis and Evaluating of Rotary Drilling Machine – Case Study: Mine No.1 of Golgohar Iron Ore Mine [Volume 6, Issue 3, 2016, Pages 185-194]
  • Pouyan, A.A A Rule-based Evaluation of Ladder Logic Diagram and Timed Petri Nets for Programmable Logic Controllers [Volume 2, Issue 3, 2012, Pages 29-34]

Q

  • Qasemi, M. Experimental analysis, mathematical modeling and Sobol sensitivity analysis of surface roughness in orthopedic milling process (polymethylmethacrylate) [Volume 11, Issue 1, 2021, Pages 139-152]
  • Qasemi, Mahdi Numerical and experimental study of orthogonal cutting bone using elastic-plastic material model and dynamic damage model [Volume 12, Issue 6, 2023, Pages 49-65]

R

  • Rabani, A. Thermodynamic Simulation of Ejector-Expansion Refrigerator Cooler [Volume 5, Issue 2, 2015, Pages 181-189]
  • Rabani, R. The Unsteady Behavior of the Natural Convection Heat Transfer in a Square Enclosure by 90° Rotate [Volume 5, Issue 2, 2015, Pages 329-339]
  • Rabbani, E. Dynamic response of thick plates under excitation of a moving mass utilizing BCOPs [Volume 8, Issue 3, 2018, Pages 165-175]
  • Rabiee, A. Numerical simulation and experimental investigation of an underwater high-speed moving body [Volume 7, Issue 1, 2017, Pages 217-230]
  • Rabiee, A.H. Vortex-induced vibration annihilation of two-degree-of-freedom circular cylinder by rotational oscillations [Volume 9, Issue 2, 2019, Pages 95-108]
  • Rabiee, Amir hossein A collaborative simulation for active flow-induced vibration control of a circular cylinder [Volume 5, Issue 3, 2015, Pages 113-124]
  • Rabieefar, Hamidreza Experimental and numerical study of V-Cone flowmeter with continuous nose in single phase liquid flow [Volume 13, Issue 6, 2024, Pages 152-139]
  • Rabiei, A. Robust adaptive control of the spacecraft formation flying in elliptical orbit with high eccentricity [Volume 7, Issue 3, 2017, Pages 83-96]
  • Raeesi, M. Reducing the undesirable effects of thermal asymmetry for a bus passengers by using airflow asymmetry under summer conditions [Volume 8, Issue 1, 2018, Pages 135-146]
  • Raeisy, Behrooz Six Degree of Freedom Simulation of Variable Mass Autonomous Underwater Vehicle [Volume 4, Issue 4, 2015, Pages 33-44]
  • Raeisy, Behrooz Investigating the effects of geometric and environmental parameters on the governing equations of scanning earth horizon sensor and attitude determination error analysis [Volume 12, Issue 5, 2022, Pages 73-91]
  • Rafee, R. Determination of the diameter ratios for minimum entropy generation in a borehole geothermal heat exchangers using numerical simulation of the flow and heat transfer [Volume 6, Issue 1, 2016, Pages 249-258]
  • Rafee, R. Investigation of Transient Heat Transfer inside Walls of Convergent-Divergent Nozzle [Volume 10, Issue 3, 2020, Pages 245-263]
  • Rafee, R. Experimental Study on the Pressure Drop and Efficiency of an Aero-Cyclone with Guide Vanes on the Vortex Finder [Volume 11, Issue 3, 2021, Pages 181-193]
  • Rafeeyan, M. Vibration analysis of continuous rotor-bearing system under various defects of unbalances [Volume 7, Issue 4, 2018, Pages 223-237]
  • Rafieian, M. Prediction of chatter phenomenon in the internal turning process using the results of experimental tests and artificial neural network [Volume 10, Issue 3, 2020, Pages 121-133]
  • Raghebi, M. Experimental measurement of fracture energy of API X65 steel using drop weight tear test equipped with accelerometer [Volume 11, Issue 1, 2021, Pages 89-96]
  • Rahaei, N. Investigation of Transient Heat Transfer inside Walls of Convergent-Divergent Nozzle [Volume 10, Issue 3, 2020, Pages 245-263]
  • Rahaeifard, M. Investigation of the effect of electrostatic actuation on the electromechanical ‎behavior of capacitive pressure microsensors ‎ [Volume 9, Issue 2, 2019, Pages 141-152]
  • Rahaeifard, M. Investigation of the nonlinear vibration and linearization error in resonant pressure micro sensors [Volume 10, Issue 4, 2021, Pages 263-274]
  • Rahbari, Hossein Identification of a Generalized Prandtl-Ishlinskii Model for a Micro Positioning System Actuated by Shape Memory Alloys Actuator [Volume 13, Issue 2, 2023, Pages 15-25]
  • Rahi, A. Experimental and Numerical Investigation of Crushing of Brass Cylindrical Tubes [Volume 6, Issue 2, 2016, Pages 181-196]
  • Rahi, A. Blades Vibration Response Study of a Bladed Disk System Connecting with Two Lacing Wires and Mistuning Effect [Volume 8, Issue 4, 2019, Pages 97-109]
  • Rahi, A. Analytical investigation of the leg geometric characteristics effect of the electronic board on the shock transmission caused by satellite separation [Volume 13, Issue 1, 2023, Pages 15-23]
  • Rahimi, A. Modeling of Microfluidic Capillary Pressure in Microstructures by Surface Evolver Software [Volume 5, Issue 3, 2015, Pages 247-255]
  • Rahimi, A.R. Free vibration analysis of functionally graded beam with transverse crack using Timoshenko and higher order shear deformation theory [Volume 11, Issue 1, 2021, Pages 275-289]
  • Rahimi, Meghdad Performance improvement in refrigeration systems using fin-reinforced phase change material [Volume 13, Issue 4, 2023, Pages 159-170]
  • Rahimi-Petroudi, A. A Study of the effect of various parameters on the stress analysis of isotropic and anisotropic plates containing a central rectangular hole subjected to shear stress [Volume 5, Issue 1, 2015, Pages 101-114]
  • Rahimpour, M. Thermal elastohydrodynamic analysis of mechanical sealsi using finite difference method [Volume 12, Issue 1, 2022, Pages 101-114]
  • Rahmani, H. Analytical solution for nonlinear dynamic response of the viscoelastic microbeam under electrical actuation based upon micropolar theory of elasticity [Volume 9, Issue 3, 2019, Pages 125-138]
  • Rahmani, H. Analytical and numerical investigation of cylindrical energy absorbers with functionally graded thickness [Volume 10, Issue 3, 2020, Pages 91-102]
  • Rahmani, H. Actuation of an Ionic Polymer Metal Composite Actuator with EMG Signal by Using Fuzzy Clustering Method [Volume 10, Issue 4, 2021, Pages 253-262]
  • Rahmani, Nima Experimental extraction of modulus of elasticity of gastric cancer tissue using cylindrical developed contact mechanics models [Volume 13, Issue 4, 2023, Pages 83-94]
  • Rahmani, P. Experimental analysis of buckling strength of notched aluminum plates reinforced using fiber metal laminate (FML) patches [Volume 6, Issue 1, 2016, Pages 117-127]
  • Rahmani, R. The Effects of Magnetic Field on The Convective Heat Transfer Around a Solid Cylinder Wrapped by a Porous Sheath [Volume 4, Issue 4, 2015, Pages 191-205]
  • Rahmani, R. Control of Uncertain Nonlinear Bilateral Teleoperation System Based on Backstepping Fuzzy Adaptive Approach [Volume 10, Issue 1, 2020, Pages 121-132]
  • Rahman nia, S. Identifying Process Damping of Turning Process Using Time Series Analysis [Volume 5, Issue 4, 2016, Pages 35-45]
  • Rahmati, Ahmad Reza Numerical simulation of forced heat transfer of liquid metals in a microchannel heat sink under a magnetic field [Volume 13, Issue 6, 2024, Pages 121-137]
  • Rahmati, A. R. Investigation of Magnetic Field Effect on Nanofluid Mixed Convection inside Lid-Driven K-shaped Enclosure Using Lattice Boltzmann Method [Volume 8, Issue 1, 2018, Pages 111-126]
  • Rahmati, A.R. Evaluation of Performance of both Spiral and Direct Tube Heat Exchanger Using the Hybrid Nano fluid [Volume 10, Issue 1, 2020, Pages 193-207]
  • Rahmati, A.R. The effect of changing the position of the hot wall and increasing the amplitude and number of oscillations of wavy wall on the flow and heat transfer of nanofluid inside the channel in the presence of magnetic field [Volume 10, Issue 2, 2020, Pages 219-236]
  • Rahmati, A.R. Application of Finite-Difference Based Lattice Boltzmann Method for Numerical Simulation of Nanofluid Turbulent Convection in channel [Volume 11, Issue 1, 2021, Pages 325-350]
  • Rahmati, Moein Failure prediction in defective pipelines using finite element simulation of fluid-structure interaction and neural network method [Volume 13, Issue 5, 2023, Pages 105-120]
  • Rahmati, R. The Effects of Magnetic Field on The Convective Heat Transfer Around a Solid Cylinder Wrapped by a Porous Sheath [Volume 4, Issue 4, 2015, Pages 191-205]
  • Rahmati, R. Local entropy generation analysis for a single slope solar still (Numerical investigations) [Volume 7, Issue 4, 2018, Pages 279-291]
  • Rahmati, R. A new model for two-phase flow in a solar still improved by a porous layer [Volume 8, Issue 1, 2018, Pages 171-182]
  • Rahnama, S. Numerical study of energy absorption in composite sandwich structures under low velocity impact [Volume 7, Issue 1, 2017, Pages 51-64]
  • Rahnama, S. Experimental study of ّFafracture Surface Characteristics of Inhomogeneous Drop Weight Tear Test Specimen Made from API X65 Steel [Volume 10, Issue 1, 2020, Pages 77-91]
  • Rahzani, F. A numerical feasibility study on using piezoelectric pumps as dosing pumps by implementing fluid-structure interaction [Volume 12, Issue 1, 2022, Pages 175-189]
  • Raisee, M. Uncertainty quantification of the turbulent flow field and heat transfer of film cooling [Volume 10, Issue 2, 2020, Pages 177-192]
  • Raisi, A. forced convective heat transfer of cu-water nanofluid over a constant surface temperature wedge [Volume 6, Issue 4, 2016, Pages 343-353]
  • Rajabi, I. Bending analysis of sandwich and laminated composite plates containing piezoelectric layers by improved global-local theory [Volume 6, Issue 2, 2016, Pages 121-137]
  • Rajabi, I. Parametric Analysis of Non-Uniform Shear Load on the Displacement and Stress Components of for FG Rectangular Plates Resting on Two-Parameter Elastic Foundation [Volume 8, Issue 4, 2019, Pages 111-127]
  • Rajabi Eslami, M. Frequency Analysis of Vortex Shedding in Cascade of an Axial Compressor in Moderate Reynolds Numbers [Volume 6, Issue 1, 2016, Pages 19-27]
  • Rajabi Zargarabadi, M. Numerical Simulation of turbulent flow and heat transfer from pulsating impinging jet to Asymmetrical concave surface [Volume 5, Issue 4, 2016, Pages 271-281]
  • Rajabi Zargarabadi, M. Numerical Investigation of the Effect of Sinusoidal Pulsating Cooling Air on Film Cooling Effectiveness of Leading Edge, Pressure and Suction Side of a Turbine Blade [Volume 9, Issue 2, 2019, Pages 227-247]
  • Rajaee, A. Study on the influences of effective parameters on the fatigue life of welded joint between locomotive gearbox baracket and bogie using FE model verified by experimental results [Volume 7, Issue 2, 2017, Pages 27-43]
  • Rakhshkhorshid, M. Determination of Johnson-Cook damage model constants for commercial pure copper sheet by tensile testing on notched specimens [Volume 11, Issue 1, 2021, Pages 97-110]
  • Ramezani, Amin Time-varying delay compensation by communication disturbance observer for teleoperation system by considering model uncertainty [Volume 4, Issue 4, 2015, Pages 143-156]
  • Ramezani, M. A. Experimental and Numerical Investigation of the Effect of Geometric Parameters on Flexible joint Nonlinear Behavior for Solid rocket motor Trust Vector Control [Volume 7, Issue 4, 2018, Pages 197-207]
  • Ramezani, O. Effect of Plate Numbers on Optimal Condition of Gasket Heat Exchanger with Graphene-Carbon Nanotube Hybrid [Volume 11, Issue 5, 2021, Pages 149-163]
  • Ramezani Dashtemian, M. Gear Fault Detection Based on Best Feature Selection by Particle Swarm Optimization [Volume 8, Issue 3, 2018, Pages 49-64]
  • Ramezanizadeh, Mahdi Numerical Investigation of Longitudinal and Vertical Positions of Canard on Pressure Distribution and Aerodynamic Coefficients of a Maneuverable Aircraft Wing Model [Volume 6, Issue 4, 2016, Pages 301-316]
  • Ramyar, M. Finite element modeling of debonding behavior of the adhesively bonded joints between sandwich panel and pultruded profile in flexural loading [Volume 6, Issue 1, 2016, Pages 107-116]
  • Ranjbar, A. Effect of increasing number and arrangement of hot fluid tube on melting behavior of Phase Change Material in a triplex tube heat exchanger [Volume 6, Issue 4, 2016, Pages 249-262]
  • Ranjbar, A. A. Numerical simulation of thermal storage using phase-change material [Volume 7, Issue 2, 2017, Pages 189-213]
  • Ranjbar, Aliakbar Performance improvement in refrigeration systems using fin-reinforced phase change material [Volume 13, Issue 4, 2023, Pages 159-170]
  • Ranjbar, F. Thermodynamic and Exergoeconomic Analysis of Combination of Single-Flash Geothermal Power Cycle with Kalina and ORC with different Organic Fluids [Volume 5, Issue 1, 2015, Pages 177-192]
  • Ranjbar, Seyed Faramarz Numerical investigation of the effect of an elastic wall on Heat Transfer around a cylinder within a channel [Volume 12, Issue 5, 2022, Pages 47-58]
  • Ranjkesh Adarmanabadi, S. Investigation of dry sliding behavior of metal on nanocomposites reinforced with carbon nanotubes and nanoclay [Volume 11, Issue 6, 2022, Pages 85-95]
  • Raoufi, M. On the Effect of Blood Flow and Oxygen Mass Transfer on Development of Atherosclerosis [Volume 4, Issue 2, 2014, Pages 119-132]
  • Rash Ahmadi, S. Elastic-Plastic Modeling of the Residual Stresses Caused by Laser Beam Welding in Aerospace Structures [Volume 5, Issue 2, 2015, Pages 153-162]
  • Rashidi, M. Identification of LRB isolators using a modified normalized Bouc-Wen model [Volume 7, Issue 1, 2017, Pages 23-33]
  • Rashidi, R. Effect of Using Nano Lubricant Containing TiO2 Particles on the Performance of Noncircular Two Lobe Journal Bearings [Volume 12, Issue 3, 2022, Pages 103-116]
  • Rashidi, Saman Study on performance of floating solar still using pumice stone as photothermal material [Volume 13, Issue 3, 2023, Pages 129-142]
  • Rashidi Alavijeh, Samaneh Numerical Analysis of Hot Deep Drawing Process of Thick Steel Sheet without Using Blank Holder with Tractrix and Pseudo Tractrix Dies [Volume 13, Issue 2, 2023, Pages 69-87]
  • Rashidi Meybodi, R. Investigation of Stability of Noncircular Lobed Journal Bearings Lubricated by Ferrofluid [Volume 7, Issue 2, 2017, Pages 165-177]
  • Rashidi Meybodi, R. Effect of Shell Surface Texture Depth on the Steady State Performance of Noncircular Two Lobe Gas Journal Bearings [Volume 11, Issue 6, 2022, Pages 273-286]
  • Rashidi Meybodi, Reza Effects of design and lubrication parameters on thermo-hydrodynamic performance of noncircular three lobe journal bearings with micropolar lubricant [Volume 6, Issue 3, 2016, Pages 79-96]
  • Rashidzade, M. The effect of aspect ratio of model to prtotypein the load acting on cylinderin free surface problems [Volume 6, Issue 4, 2016, Pages 317-328]
  • Rasoli, Mohammadali Numerical Analysis of Hot Deep Drawing Process of Thick Steel Sheet without Using Blank Holder with Tractrix and Pseudo Tractrix Dies [Volume 13, Issue 2, 2023, Pages 69-87]
  • Rasooli, M. A. Theoretical and Numerical Analysis of Hot Deep Drawing of Hemispherical Thick Head [Volume 10, Issue 2, 2020, Pages 59-78]
  • Rasoolizadeh Shooroki, A. Effects of design and lubrication parameters on thermo-hydrodynamic performance of noncircular three lobe journal bearings with micropolar lubricant [Volume 6, Issue 3, 2016, Pages 79-96]
  • Rasoolizadeh Shooroki, A. Effect of Using Nano Lubricant Containing TiO2 Particles on the Performance of Noncircular Two Lobe Journal Bearings [Volume 12, Issue 3, 2022, Pages 103-116]
  • Rasouli Gharaveran, M. Experimemtal and Numerical Analysis of Bipolar width and Gas Channels Geometrical Configuration Effect on Proton Exchange Membrane Fuel cell [Volume 10, Issue 4, 2021, Pages 357-372]
  • Rasti, E. A DNS investigation of drag reduction phenomenon in turbulent flow of a viscoelastic fluid [Volume 7, Issue 1, 2017, Pages 255-274]
  • Rayegan, H. Investigation of stress distribution in healthy and arthritic knee joints after registering 3D files on the radiographic images [Volume 13, Issue 1, 2023, Pages 147-156]
  • Razavi, Seyed E. A novel multidimensional characteristic modeling of incompressible convective heat transfer [Volume 5, Issue 4, 2016, Pages 283-296]
  • Razavi, Seyed E. A Characteristic-Based Finite-Volume Solution of Incompressible Flows with Heat Transfer [Volume 8, Issue 3, 2018, Pages 315-326]
  • Razavi, Seyed Esmail Numerical investigation of the effect of an elastic wall on Heat Transfer around a cylinder within a channel [Volume 12, Issue 5, 2022, Pages 47-58]
  • Razazan, M.R. Investigation of the process parameter effects on the hole geometry characteristics in laser drilling of Hastelloy X superalloy [Volume 9, Issue 1, 2019, Pages 45-54]
  • Razi Mousavi, Seyed H. Dynamic Analysis of Autofrettage under Transient Loading in FG Thick-Walled Cylinder with Work Hardening Behavior Using Numerical Method [Volume 9, Issue 1, 2019, Pages 27-43]
  • Razmi, H. Adaptive Fuzzy Sliding Mode Position and Attitude Control for a Quadrotor UAV [Volume 7, Issue 4, 2018, Pages 159-172]
  • Reeszadeh, Mohammad Effect of Tip Injection on Tip Leakage Flow Structure in Axial Compressor [Volume 12, Issue 5, 2022, Pages 147-160]
  • Reiszadeh, M. Evaluation of Performance of both Spiral and Direct Tube Heat Exchanger Using the Hybrid Nano fluid [Volume 10, Issue 1, 2020, Pages 193-207]
  • Rezaee, M. Development of MAFVRO to Randomly Excited Vibration Systems to Derive the Natural Frequencies and Mode Shapes [Volume 5, Issue 2, 2015, Pages 71-81]
  • Rezaeepajhand, Jalil Guided wave modeling using p version of semi analytical finite element method [Volume 13, Issue 3, 2023, Pages 1-16]
  • Rezaeepazhand, J. Effect of Grid Configuration on Buckling and Vibration Response of Composite Grid Plates [Volume 5, Issue 3, 2015, Pages 93-100]
  • Rezaeepazhand, J. Effects of initial twist on buckling and frequency response of SMA tubes [Volume 7, Issue 3, 2017, Pages 17-28]
  • Rezaeepazhand, J. Performance Comparison of the Electro/Magneto-Rheological Elastomers for Vibration Reduction of Rotating Rotors [Volume 9, Issue 3, 2019, Pages 139-153]
  • Rezaeepazhand, J. Vibration of buckled composite plates with embedded heat treated SMA wires [Volume 10, Issue 1, 2020, Pages 93-106]
  • Rezaeepazhand, J. Investigation of nonlinear aero-elastic of isotropic cracked plate in supersonic flow [Volume 11, Issue 1, 2021, Pages 1-12]
  • Rezaeepazhand, jalil Effect of external electrorheological damper on dynamic buckling behavior of a metallic plate [Volume 4, Issue 1, 2014, Pages 25-36]
  • Rezaei, E. Numerical Simulation of turbulent flow and heat transfer from pulsating impinging jet to Asymmetrical concave surface [Volume 5, Issue 4, 2016, Pages 271-281]
  • Rezaei, Majid Investigation of structural properties of electrosmotic flow in a nanochannel by molecular dynamics simulation [Volume 2, Issue 4, 2013, Pages 77-91]
  • Rezaei, M. R. The investigation of microstructure and mechanical properties of metallic glass/ceramic reinforced hybrid Al matrix composite used as foam precursor material [Volume 10, Issue 2, 2020, Pages 153-162]
  • Rezaei, Seyed M. Finite Element Analysis of Heat Distribution in Weld Parts by Adaptive Mesh Method [Volume 7, Issue 1, 2017, Pages 135-145]
  • Rezaei, Seyed M. Hydraulic Hybrid Propulsion System Design and Simulation [Volume 12, Issue 2, 2022, Pages 1-12]
  • Rezaei Ashtiani, H. Predication of roll force and roll torque in hot strip rolling process using artificial neural networks and finite element method [Volume 6, Issue 3, 2016, Pages 149-162]
  • Rezakazem, M. CFD Simulation of Anode Solid Oxide Fuel Cell [Volume 9, Issue 1, 2019, Pages 217-235]
  • Rezazadeh, Marzieh Numerical simulation of heat transfer in a parabolic solar coleector absorber tube using two-phase method [Volume 13, Issue 3, 2023, Pages 115-127]
  • Rezazadeh, Niki Numerical Simulation of the Controlled Fluid Flow Around the Cylinder Using Compound Actuators [Volume 6, Issue 3, 2016, Pages 239-247]
  • Rezazadeh, S. Experimemtal and Numerical Analysis of Bipolar width and Gas Channels Geometrical Configuration Effect on Proton Exchange Membrane Fuel cell [Volume 10, Issue 4, 2021, Pages 357-372]
  • Rezvani, A. Numerical Solution of Natural Convective Heat Transfer of Al2O3/Water Nanofluids in a Square Cavity with Modified Circular Corners [Volume 7, Issue 1, 2017, Pages 315-328]
  • Riasi, A.R. Sensitivity Analysis and optimization of the Inducer in a Rotary Gas Separator of Electrical Submersible Pump under single phase and two phase conditions [Volume 8, Issue 3, 2018, Pages 289-302]
  • Rohani, A. Determination of optimum parameters effect on stress distribution in orthotropic plates with quasi-square cut out using genetic algorithm [Volume 4, Issue 4, 2015, Pages 87-99]
  • Rohani, A. Estimation of stress concentration factor of composite lamina with triangular hole using multiple linear regression [Volume 8, Issue 2, 2018, Pages 25-36]
  • Roohi, E. A NEW HYBRID FOKKER-PLANCK-DSMC APPROACH FOR MODELING RAREFIED GAS IN CONVERGANT-DIVERGANT NOZZLE WITH PLUME [Volume 10, Issue 4, 2021, Pages 331-343]
  • Roohi, E. Numerical Study of the Effect of Passive Counter Rotating Vanes Vortex Generator on NACA 2412 Airfoil [Volume 11, Issue 6, 2022, Pages 235-252]
  • Roshan, A. Performance improvement of hybrid Darrieus-Savonius wind turbine [Volume 6, Issue 3, 2016, Pages 195-212]
  • Roshanaei, M. An investigation on the microstructure and mechanical properties of dissimilar laser welded joint between AISI 430 ferritic stainless steel and AISI 2304 duplex stainless steel in order to optimize the fracture force of joints [Volume 10, Issue 3, 2020, Pages 158-147]
  • Roshani, Gh. H. Volume fraction measurement in gas-liquid two phase flow using gamma radiation scattering [Volume 7, Issue 2, 2017, Pages 179-187]
  • Roshanian, J. L1 adaptive controller design of a space system considering structural flexibility [Volume 6, Issue 2, 2016, Pages 17-27]
  • Rostami, Hoda Modeling of Crashworthiness in Energy Absorbent Shells with Discontinuities [Volume 13, Issue 6, 2024, Pages 1-15]
  • Rostami, M. Analysis of axial symmetric circular cylindrical shell vibrations using high-order theory to approximate transverse displacement by finite element [Volume 11, Issue 2, 2021, Pages 87-97]
  • Rostami, M. Size-dependent vibration of rotating rayleigh microbeams with variable cross-section in complex environments [Volume 11, Issue 6, 2022, Pages 159-171]
  • Rostami V.F., M. Numerical and Analytical Calculation of Munk Moment in Real Flow for an Autonomous Submarine in Pure Sway Motion in PMM Test [Volume 9, Issue 3, 2019, Pages 205-216]
  • Rostami V.F., M. Application and Comparison of Pressure and Velocity Correction Methods and Boundary Conditions in WCSPH Method for numerical modelling of 3D Inviscid Fluid Flow [Volume 9, Issue 4, 2019, Pages 227-236]
  • Rostamiyan, Y. Investigation and optimization of the mechanical properties of epoxy based Hybrid Nano-composites reinforced by carbon-fiber: Using Taguchi method [Volume 7, Issue 3, 2017, Pages 97-112]
  • Rostamiyan, Y. Experimental Investigation of High-velocity Impact Effects on Composite Sandwich Panel with M-Type Lattice Core Made of Carbon Fiber Reinforced by Nano-SiO2 [Volume 11, Issue 6, 2022, Pages 127-142]
  • Rostamiyan, Y. Experimental and numerical investigation on mechanical properties of bending and compressive behaviour of carbon-epoxy sandwich panel with novel M-shaped core [Volume 12, Issue 1, 2022, Pages 67-84]
  • Rouhani Tazangi, H. investigation of rheological behavior of suspensions included power-law fluid by combined lattice-Boltezmann method with smoothed profile method [Volume 9, Issue 2, 2019, Pages 197-210]
  • Rousta Navi, B. Free vibration of the cylindrical panel made of functionally graded materials resting on pasternak elastic foundation subjected to magnetic fields using first order shear deformation theory [Volume 5, Issue 1, 2015, Pages 149-163]
  • Rouzbahani, F. Numerical simulation of wave-floating bodies interaction using a truly incompressible SPH method with artificial compressibility approach [Volume 8, Issue 1, 2018, Pages 241-252]

S

  • Saadat, H. Experimental investigation of thermal structure and convection heat transfer from an array of perforated fins with one cross opening [Volume 5, Issue 3, 2015, Pages 197-208]
  • Saadi, M. Optimization of shell and tube heat exchangers using heuristic algorithms [Volume 8, Issue 3, 2018, Pages 153-163]
  • Sabahi, Mohammad Ali Nonlinear vibrations of functionally graded porous micropipes conveying fluid flow [Volume 13, Issue 2, 2023, Pages 89-101]
  • Sabahi Namini, Abbas Vibration Analysis of Circular Nanoplates under Nonlinear Electrostatic Excitation Considering the Surface Energy and Size Effects [Volume 12, Issue 5, 2022, Pages 133-146]
  • Sabbaghi, Mohammad Ali Energy, Exergy, Economic and Environmental Analysis (4E) of an Organic Rankine Cycle to produce power, hydrogen and desalinated water by combining geothermal energy and heat recovery [Volume 12, Issue 5, 2022, Pages 201-214]
  • Sabbaghi Farshi, S. Application of laser shearing interferometry in non-destructive inspection and size estimation of plane defects [Volume 9, Issue 4, 2019, Pages 1-14]
  • Saberi, A. Fractal Analysis of Viscous Fingering Instability of Two Reactive Miscible Fluids through Homogeneous Porous Media [Volume 9, Issue 1, 2019, Pages 265-278]
  • Saberi, A. Dynamic Analysis and Control of Two Phase Flow Instability in Boilnig Channel [Volume 11, Issue 5, 2021, Pages 165-181]
  • Saberi NasrAbad, N. Application of vibration loading method for non-destructive testing of polymer Material by Means of Laser Shear Interferometry [Volume 10, Issue 4, 2021, Pages 15-26]
  • Saberi Nejad, H. Numerical analysis of heat transfer in turbulent reciprocating flow in Stirling engine heat exchanger [Volume 5, Issue 4, 2016, Pages 187-200]
  • Sabokrouh, M. Experimental determination of the effect of titanium nanoalloy on mechanical properties of girth welding on Iranian natural gas transmission pipelines [Volume 8, Issue 3, 2018, Pages 213-219]
  • Saboohi, Z. Numerical study of flow characteristics in a single-element Lean Direct Injection (LDI) combustion chamber [Volume 10, Issue 4, 2021, Pages 287-302]
  • Saboohi, Z. Identification of the Droplet Group Combustion Formation Region by the Flame Index Parameter in the Laminar Counterflow Spray [Volume 11, Issue 1, 2021, Pages 212-199]
  • Saboohi, Z. Experimental study of the effects of adding methylated homopolymer to gasoline on the engine performance and pollutant emissions [Volume 11, Issue 5, 2021, Pages 199-210]
  • Sabour, M. H. Investigating the effects of microtubules in the neuronal cell response to the blast load using fluid-structure interactions method [Volume 9, Issue 3, 2019, Pages 13-24]
  • Sabri Laghaie, K. Flutter analysis of the panel treated with integrated and segmented constrained layer damping [Volume 11, Issue 3, 2021, Pages 245-261]
  • Sabzali, H. Numerical and Experimental Investigation of Entropy Generation in a Supersonic Air Intake at Design Mach number [Volume 9, Issue 1, 2019, Pages 139-152]
  • Sadat, A. Experimental and Numerical Investigation of Die Filling and Thickness Variation at Two Step Box Copper Tube Hydroforming Die with Movable Bushes [Volume 6, Issue 2, 2016, Pages 87-96]
  • Sadati, Seyyed H. Design of hybrid control system for path tracking of a quadrotor subject to uncertain disturbances [Volume 11, Issue 5, 2021, Pages 17-32]
  • Sadatifar, Seyed S. Optimization of the CHP System, Investigation of its Pollution and Economic Costs in Ideal and Real Conditions in terms of Local and Global Approach [Volume 10, Issue 1, 2020, Pages 161-176]
  • Sadedel, M. Vibration of rotating microbeams with axial motion in complex environments [Volume 12, Issue 4, 2022, Pages 1-12]
  • Sadeghi, H. Experimemtal and Numerical Analysis of Bipolar width and Gas Channels Geometrical Configuration Effect on Proton Exchange Membrane Fuel cell [Volume 10, Issue 4, 2021, Pages 357-372]
  • Sadeghi, M. Experimental investigation of vibrational mode shape influence on compression behaviour of Ti-6Al-4V alloy under superimposed ultrasonic vibration [Volume 12, Issue 4, 2022, Pages 55-68]
  • Sadeghi pour marvi, Amir Numerical Study of Solid Particle Deposition on a Square Filter Using Lattice Boltzmann Method [Volume 5, Issue 2, 2015, Pages 249-260]
  • Sadeghpour, K. Investigation of Shear Strength of the Bonding Region for Dissimilar Aluminum Alloy Sheets in Friction Stir Spot Welding Process [Volume 9, Issue 1, 2019, Pages 125-138]
  • Sadegh Yazdi, M. A review on the underwater explosive forming [Volume 11, Issue 6, 2022, Pages 59-83]
  • Sadeghzadeh, A. Output Feedback smooth switching control design for switched uncertain linear parameter-varying systems [Volume 11, Issue 6, 2022, Pages 27-44]
  • Sadidi, M. Experimental and fractography investigation of notch depth effect by instrumented instrumented impact pendulum in 7075 Aluminum alloy [Volume 11, Issue 3, 2021, Pages 15-36]
  • Sadighi, M. Online health monitoring of marine structures using electromechanical impedance spectroscopy: A simulation approach [Volume 10, Issue 4, 2021, Pages 67-76]
  • Sadr, Jalaleddin Determination of energy-notch depth relationship using force-displacement diagrams in instrumented Charpy impact testing of API X65 steel [Volume 12, Issue 6, 2023, Pages 149-162]
  • Saedodin, S. A New Models For Dynamic Viscosity of a MWCNTs-EG Nanofluid [Volume 6, Issue 1, 2016, Pages 179-188]
  • Saeedi, A. The Effect of Non-uniform magnetic field on the fluid flow over a moving and permeable plate with using self-similar method [Volume 6, Issue 2, 2016, Pages 341-349]
  • Saeedi, Mohammad S. Developing a Multi-Objective Game Theoretic Design of Path-Generating Planar Mechanism [Volume 13, Issue 6, 2024, Pages 17-29]
  • Saeidi, A. Finite element modeling of debonding behavior of the adhesively bonded joints between sandwich panel and pultruded profile in flexural loading [Volume 6, Issue 1, 2016, Pages 107-116]
  • Saeidi, F. Numerical and Experimental Analysis of Spring-back Defect in Flexible Roll Forming Process using Anisotropic Yield Criteria [Volume 11, Issue 4, 2021, Pages 93-105]
  • Saeidiha, M. Vibration analysis of pipe conveying fluid, made of functionally graded material in thickness direction [Volume 9, Issue 4, 2019, Pages 107-116]
  • Safaeifar, H. Theoretically and Parametrically Investigation on Operation of Variable Diameter Impact Damper in Free Vibrations of a 1-DOF System [Volume 9, Issue 1, 2019, Pages 15-26]
  • Safaeifar, Hossein Proposing an analytical relationship to calculate the damping inclination of rigid single mass impact dampers [Volume 12, Issue 6, 2023, Pages 139-148]
  • Safarabady, Amin Investigating factors affecting electrode wear rate in electrical discharge machining of AZ91 magnesium alloy metal matrix composite reinforced with silicon carbide microparticles [Volume 13, Issue 4, 2023, Pages 119-134]
  • Safari, M. An investigation on the microstructure and mechanical properties of dissimilar laser welded joint between AISI 430 ferritic stainless steel and AISI 2304 duplex stainless steel in order to optimize the fracture force of joints [Volume 10, Issue 3, 2020, Pages 158-147]
  • Safari, M. Statistical modelling, optimization and Sobol sensitivity analysis of effective parameters on thrust force behavior in micro-drilling of glass/epoxy laminated composites [Volume 10, Issue 4, 2021, Pages 225-240]
  • Safari Chaykandi, J. Thermal Response Analysis of Lock-in Thermography Test to Identify the Delamination in Composite Materials [Volume 6, Issue 3, 2016, Pages 119-136]
  • Safarkhanian, Mohammad Experimental evaluation of the tool rotation speed and feed rate on micro hardness and microstructure of 5456 aluminum alloy in friction stir welding process [Volume 3, Issue 3, 2013, Pages 1-10]
  • Safarpour, M. Investigation of dynamics and stability behavior of axially moving micro-beams with functionally graded property in the longitudinal direction [Volume 10, Issue 2, 2020, Pages 79-94]
  • Safarpour, P. Piezoelectric Configurations Effects on Acoustic Energy Density in an Ultrasonic Microcontainer for Preparing Nanoemulsion [Volume 8, Issue 3, 2018, Pages 15-28]
  • Safarpour, P. Enhancing the performance of Bi-stable Energy Harvester using Chaos control [Volume 11, Issue 2, 2021, Pages 1-14]
  • Safarpour, P. Detection of Single and Multiple Cracks in Circular Cylindrical Shells Using Modal Analysis and Wavelet Transform [Volume 12, Issue 2, 2022, Pages 13-28]
  • Safarzadeh, H. Applying fuzzy logic to optimize the performance of solar air heater with installation of air barriers in cross channel [Volume 6, Issue 4, 2016, Pages 329-341]
  • Safavi, Hamid Reza An investigation into the effect of surface preparation method and heat Treatment on mechanical properties of multilayer Al / Al / Steel sheet produced by cold roll bonding [Volume 13, Issue 2, 2023, Pages 55-67]
  • Safavi, K. Force and stress analysis of double press machine in use with single-action die press [Volume 6, Issue 1, 2016, Pages 167-177]
  • Safavinejad, A. Energy and Exergy Analysis and Optimization of a Cogeneration System Based on Solid Oxide Fuel Cell for Residential Applications [Volume 5, Issue 4, 2016, Pages 213-228]
  • Safavinejad, A. Analysis the influence of air outlet opening’s location in an industrial environment with high temperature radiant heaters on uniformity of thermal conditions and distribution of the contaminant in presence of asymmetric flow field [Volume 6, Issue 3, 2016, Pages 249-260]
  • Safavinejad, A. Optimal search of heat sources location in conjugate natural convection with surface radiation in a two-dimensional enclosure utilizing particle swarm optimization algorithm [Volume 8, Issue 2, 2018, Pages 177-191]
  • Saffari, H. Modeling of Microfluidic Capillary Pressure in Microstructures by Surface Evolver Software [Volume 5, Issue 3, 2015, Pages 247-255]
  • Saffari, H. Thermal Performance Modeling of Liquid in Evaporator with Spherical Microstructures and Conical Micropillars [Volume 6, Issue 4, 2016, Pages 193-204]
  • Saffari, H. Investigating the effect of Marangoni phenomenon on single drop density on Wenzel and Cassie structures [Volume 10, Issue 4, 2021, Pages 387-398]
  • Saffari, Hamid Analysis of the effect of surface slope changes on the growth, motion, and coalescence of droplets in dropwise condensation [Volume 12, Issue 6, 2023, Pages 163-180]
  • Saffarian, M. R. Simulation of Two-Phase Oil and Air Flow of the Lower Bearing of Shahid Abbaspour Dam Power Plant Generator [Volume 9, Issue 1, 2019, Pages 203-216]
  • Saffarzadeh, Mohammad Mehdi Multi objective optimization of static behavior of FGM multi layered plate based on exact solution and using neural-genetic method [Volume 3, Issue 1, 2013, Pages 55-66]
  • Safikhani, H. Optimization of ultrasonic transducer horn geometry with vibrational-thermal performance improvement approach [Volume 11, Issue 1, 2021, Pages 31-42]
  • Safikhani-Nasim, M. Experimental and numerical analysis of effective geometrical parameters for energy absorbing of the structures with negative Poisson's ratio made from aluminium alloy 1100 [Volume 11, Issue 1, 2021, Pages 311-324]
  • Saghafian, M. بررسی عملکرد فن گریز از مرکز یک توربین سرمایشی با استفاده از شبیه‌سازی عددی [Volume 6, Issue 2, 2016, Pages 245-257]
  • Saghafian, M. Numerical Simulation of free falling Cylinders using Overset Grid Method [Volume 6, Issue 3, 2016, Pages 1-16]
  • Saghafian, Mohsen Numerical simulation of laminar flow and heat transfer from rotating circular cylinder confined in a channel [Volume 4, Issue 3, 2014, Pages 65-81]
  • Sagharichi, A. Investigation of flow field and torque coefficient of Darrieus wind turbine with respect to pitch angle variations and tip speed ratios [Volume 6, Issue 4, 2016, Pages 173-191]
  • Saghatoleslami, N. A numerical study of the effects of effective parameters on porous medium burner by creating a groove in the porosity matrix with the aim of reducing NOx emissions [Volume 8, Issue 3, 2018, Pages 327-340]
  • Saham, Seyed Sam Wind Energy potential evaluation and customizing a H-rotor Turbine based on Tehran, Zahedan and Manjil climate [Volume 12, Issue 5, 2022, Pages 267-281]
  • Sahraei, M. Thickness optimization of the airplane wing box components by the design of experiments method [Volume 13, Issue 1, 2023, Pages 43-56]
  • Saidi, Ali Reza Nonlinear vibrations of functionally graded porous micropipes conveying fluid flow [Volume 13, Issue 2, 2023, Pages 89-101]
  • Saidian, H. An Efficient Approach to Calculate the Amount of Released Gas in Branched Networks Considering Minor Loss Effects [Volume 5, Issue 2, 2015, Pages 271-284]
  • Sajadi, S. R. Effect of Through-thickness Variation of Mechanical Properties on Stress Distribution in API X65 Linepipe Steel: An Experimental and Numerical Investigation [Volume 12, Issue 4, 2022, Pages 81-90]
  • Sajedi, R. Modeling of Solar Desalination Equipped with Phase Change Materials by Air Humidification and Dehumidification Technique [Volume 12, Issue 4, 2022, Pages 159-174]
  • Sajedin, A. Analysis of the blade thickness distribution effects on the turbocharger turbine performance at full and partial admission condition [Volume 10, Issue 1, 2020, Pages 297-311]
  • Sakaki, A. Model-Free Control for a Vehicle Hydraulic Suspension System [Volume 4, Issue 4, 2015, Pages 13-21]
  • Sakhaie, A. H. Experimental study on the effect of Friction Stir Spot Welding process parameters on the shear strength of created joints in AA7075-T6 [Volume 7, Issue 3, 2017, Pages 53-66]
  • Salahi, N. Reduce the hot-spot temperature of an oil transformer using a heat pipe [Volume 13, Issue 1, 2023, Pages 87-97]
  • Salamat-talab, M. Statistical modelling, optimization and Sobol sensitivity analysis of effective parameters on thrust force behavior in micro-drilling of glass/epoxy laminated composites [Volume 10, Issue 4, 2021, Pages 225-240]
  • Salari, M. Experimental and Numerical Investigation on the Parameters of Ventilated Super Cavitation around 30 degree Conical Cavitator [Volume 5, Issue 3, 2015, Pages 303-314]
  • Salari, M. Investigation effect of wetted surface of cylindrical shell on vibrational frequency in different immersion depth numerically and experimentally [Volume 11, Issue 6, 2022, Pages 97-109]
  • Salarieh, H. Force and stress analysis of double press machine in use with single-action die press [Volume 6, Issue 1, 2016, Pages 167-177]
  • Salarikheybar, A. Investigation of natural convection heat transfer of viscoplastic nanofluids-Casson model in a square enclosure [Volume 11, Issue 4, 2021, Pages 165-178]
  • Salavati, M. Actuation of an Ionic Polymer Metal Composite Actuator with EMG Signal by Using Fuzzy Clustering Method [Volume 10, Issue 4, 2021, Pages 253-262]
  • Saleh, A. Thermoeconomic evaluation of drinking water production by using different prime mover on combined production of cooling, heating, power, and freshwater [Volume 11, Issue 1, 2021, Pages 365-379]
  • Saleh, Seied R. Numerical investigation of two-phase nanofluid flow in square cavity with inclined wall under different magnetic field [Volume 13, Issue 1, 2023, Pages 125-136]
  • Salehi, E. Developing a statistical model based on Markov chain for fatigue life prediction of double lap composite adhesive joints [Volume 12, Issue 4, 2022, Pages 91-102]
  • Salehi, Gh. R. Computational Fluid Dynamics Simulation of Ljungstrom Rotary Preheater in Steam Power Plant for Leakage Assessment Using Porous Media Approach [Volume 11, Issue 4, 2021, Pages 179-190]
  • Salehi, M. Structural damage localization in beam-like structures using Multi-channel Empirical Mode Decomposition of random response [Volume 8, Issue 3, 2018, Pages 221-231]
  • Salehi, M. Health Condition Monitoring of railway wheels through vibration analysis using the moving RMS [Volume 11, Issue 4, 2021, Pages 85-92]
  • Salehi, Me. sensitivity analysis of Operational Modal Approaches in damping identification and implementation on an industrial sample [Volume 8, Issue 3, 2018, Pages 177-192]
  • Salehi, M. S. Finite Element Simulation and Analysis of Deposition Process and Thermal Loading on Thermal Barrier Coatings [Volume 10, Issue 4, 2021, Pages 41-51]
  • Salehi, S. Uncertainty quantification of the turbulent flow field and heat transfer of film cooling [Volume 10, Issue 2, 2020, Pages 177-192]
  • Salehipoor, Hamze Dynamic Response of Curved Sandwich Beam with a Soft Flexible Core Subjected to Radial Low Velocity Impact [Volume 5, Issue 1, 2015, Pages 1-11]
  • Salehi Pour, H. Free vibration of micro/nano homogeneous beams coated by functionally graded porous layer using analytical and numerical methods [Volume 11, Issue 4, 2021, Pages 33-52]
  • Salehizadeh, A. M. Numerical analysis of mixed electroosmotic/pressure driven flow using an improved weakly compressible Smoothed Particle Hydrodynamics method [Volume 11, Issue 4, 2021, Pages 121-131]
  • Salimpour, M.R. Experimental Study on Heat Transfer of Water/TiO2 Nanofluid in a Straight Tube with Twisted Tapes at Constant Wall Temperature [Volume 5, Issue 3, 2015, Pages 165-172]
  • Salimpour, M.R. Study of the effect of nano-fluid in the diesel-cooled diesel engine oil cooler [Volume 8, Issue 2, 2018, Pages 221-233]
  • Salimzadeh Kakroudi, M. B. A New Intelligent Method for Bearing Fault Detection Based on Co-integration Concept and Selecting the Optimal Feature Set at Time-Varying Speed Conditions [Volume 9, Issue 4, 2019, Pages 41-57]
  • Samadani, Farzan Investigation of sound transmission in composite rectangular panels under the incidence wave with two various angles [Volume 13, Issue 2, 2023, Pages 41-54]
  • Samadi, B. Investigation of sequence effect on welding residual stresses and distortion in a aluminum shell opening [Volume 8, Issue 3, 2018, Pages 1-14]
  • Samaeifar, F. Effect of SiO2/Al to increase microcantilever infrared detectors sensitivity and compare with Si3N4/Au [Volume 5, Issue 3, 2015, Pages 151-163]
  • Samaeifar, F. Design and fabrication of optimized gold micro-heater and comparison of its performance with platinum micro-heater [Volume 6, Issue 1, 2016, Pages 259-272]
  • Sameezadeh, M. Effect of repair welds on the microstructure and mechanical properties of 9Cr1Mo welding joint [Volume 10, Issue 2, 2020, Pages 29-44]
  • Samimian Tehrani, Sh. Detection of Single and Multiple Cracks in Circular Cylindrical Shells Using Modal Analysis and Wavelet Transform [Volume 12, Issue 2, 2022, Pages 13-28]
  • Sampour, S. Analytical solution for nonlinear dynamic response of the viscoelastic microbeam under electrical actuation based upon micropolar theory of elasticity [Volume 9, Issue 3, 2019, Pages 125-138]
  • Sangtarash, H. Layered finite element analysis of laminated composite plates by using unsymmetric membrane element and non-conforming bending element [Volume 10, Issue 2, 2020, Pages 141-152]
  • Sarafrazi, V. Analysis and modeling of aerodynamic pressure wave due to high-speed trains passage [Volume 6, Issue 3, 2016, Pages 65-78]
  • Saranjam, B. Elasto-plastic time dependent impact analysis of high speed projectile on water surface [Volume 6, Issue 3, 2016, Pages 281-298]
  • Saranjam, B. Numerical simulation and experimental investigation of an underwater high-speed moving body [Volume 7, Issue 1, 2017, Pages 217-230]
  • Sarfaraz, R. Dimensional characteristic of glass/epoxy composite plate with edge notch under wet freeze-thaw cycles [Volume 10, Issue 3, 2020, Pages 219-231]
  • Sarkheil, Saeed Development of the Conceptual Design Algorithm for Tactical Aerostat [Volume 13, Issue 2, 2023, Pages 103-120]
  • Sarparast, H. Free lateral vibration analysis of inhomogeneous beams under various boundary conditions [Volume 8, Issue 3, 2018, Pages 123-135]
  • Sarvari, P. Large Eddy Simulation of Three Dimensional Mixed Convection Flow Inside the Ventilated Cavity Containing Obstacle and Extraction of Coherent Structures using Proper Orthogonal Decomposition (POD) [Volume 7, Issue 3, 2017, Pages 199-212]
  • Sarvestan, V. Free and Force Vibration Analysis of Cracked Euler-Bernoulli Beam with Spectral Finite Element Method [Volume 5, Issue 2, 2015, Pages 57-70]
  • Sarvi Ghiasabadi, O. Identification of Stiffness and Damping Coefficients of Beams Supports [Volume 6, Issue 1, 2016, Pages 43-60]
  • Sayahbadkhor, M. Presenting a modified theory and analytical investigation of projectile penetration into ceramic - metal semi-infinite targets [Volume 9, Issue 2, 2019, Pages 31-45]
  • Sayahbadkhor, M. Evaluation of the projectile penetration models in the metal and ceramic targets [Volume 9, Issue 4, 2019, Pages 77-92]
  • Sayah Badkhor, M. Primary creep analysis of nanocomposite thick-walled sphere under thermal, magnetic and mechanical loading using viscoelastic Bergurs model [Volume 6, Issue 3, 2016, Pages 163-174]
  • Sayah Badkhor, M. Experimental investigation and optimal analysis of the high-velocity forming process of bilayer plates [Volume 9, Issue 3, 2019, Pages 65-80]
  • Sayah Badkhor, M. Response of reinforced metallic plates with polyurea coating subjected to high-velocity projectile impact by finite element method and presenting a model based on evolutionary regression [Volume 10, Issue 1, 2020, Pages 133-148]
  • Sayah Badkhor, M. A study on plastic response of circular plates under uniformly and locally distributed dynamic loading [Volume 10, Issue 2, 2020, Pages 11-27]
  • Sayah Badkhor, M. Analytical, experimental and numerical investigation of ballistic performance of ceramic composite targets [Volume 10, Issue 3, 2020, Pages 31-45]
  • Sayah Badkhor, M. A study on the ballistic performance of single-layered and multi-layered structures impacted by spherical rigid projectile: experimental investigation and modelling [Volume 10, Issue 4, 2021, Pages 125-143]
  • Sayah Badkhor, M. Investigation of the influence of standoff distance of explosive charge on the response of circular metallic plates [Volume 11, Issue 2, 2021, Pages 175-191]
  • Sayah Badkhor, M. Experimental Investigation into the Behaviour of FMLs Containing Nanoparticles under Repeated Low-velocity Impact [Volume 11, Issue 6, 2022, Pages 187-206]
  • Sayah Badkhor, M. Analytical and experimental study of fatigue in 7075 aluminum nanocomposite reinforced with silicon carbide particles produced by vortex method [Volume 12, Issue 1, 2022, Pages 85-100]
  • Sedaghat, A. Experimental Study on Heat Transfer of Water/TiO2 Nanofluid in a Straight Tube with Twisted Tapes at Constant Wall Temperature [Volume 5, Issue 3, 2015, Pages 165-172]
  • Sedaghat, Mohammad Hadi On the natural convective heat transfer from a cold horizontal cylinder over an adiabatic surface [Volume 2, Issue 3, 2012, Pages 19-28]
  • Sedaghatnejad, M. Analysis of mixed convection heat transfer of CuO-water nanofluid in a vertical square duct using two phase Euler-Lagrange approach [Volume 6, Issue 2, 2016, Pages 227-244]
  • Sedehi, Sayyed Mohammad Reza Experimental comparison of microstructure and surface properties of Al / Al2O3 sample produced by powder metallurgy and spark plasma sintering methods [Volume 12, Issue 5, 2022, Pages 123-132]
  • Sedigh, A. Numerical Simulation of One Dimensional Pulsed Plasma Thruster with Solid Propellant [Volume 7, Issue 1, 2017, Pages 161-173]
  • Sedighi, M. Optimization of Radiation Shields Parameters in Multi-Layer Thermal Insulations [Volume 8, Issue 1, 2018, Pages 71-81]
  • Sefid, M. Numerical solution to the multi- layer core- annular flow of two fluids with different viscosities using Spectral Element Method [Volume 8, Issue 4, 2019, Pages 249-260]
  • Sefid, M. Numerical Simulation of Mixing Two Fluids of Different Viscosities in a Micromixer at Different Aspect Ratios of Stirrer by LBM [Volume 9, Issue 1, 2019, Pages 187-202]
  • Sefid, M. The effect of changing the position of the hot wall and increasing the amplitude and number of oscillations of wavy wall on the flow and heat transfer of nanofluid inside the channel in the presence of magnetic field [Volume 10, Issue 2, 2020, Pages 219-236]
  • Sefid, M. Numerical analysis of mixed electroosmotic/pressure driven flow using an improved weakly compressible Smoothed Particle Hydrodynamics method [Volume 11, Issue 4, 2021, Pages 121-131]
  • Sefid, Mohammad Energy, Exergy, Economic and Environmental Analysis (4E) of an Organic Rankine Cycle to produce power, hydrogen and desalinated water by combining geothermal energy and heat recovery [Volume 12, Issue 5, 2022, Pages 201-214]
  • Sekhavat, S. Experimental investigation on the effect of preprocessing in fabrication of superhydrphobic surfaces on laminar drag reduction [Volume 8, Issue 4, 2019, Pages 239-248]
  • Selahi, E. Transient Analysis of Functionally Graded Cylindrical Shells Subjected to Asymmetric Thermo-mechanical Shock Loads with Temperature Dependent Material Properties [Volume 9, Issue 2, 2019, Pages 153-166]
  • Sepahi-Younsi, J. Numerical and Experimental Investigation of Entropy Generation in a Supersonic Air Intake at Design Mach number [Volume 9, Issue 1, 2019, Pages 139-152]
  • Sepahvand, P. Presenting the calculation process of pitch and roll damping coefficients for a projectile in various flight conditions with numerical method [Volume 7, Issue 4, 2018, Pages 183-196]
  • Sepehry, N. Theoretical and experimental analysis of jamming of workpiece in the fixture by using the block and palm study [Volume 10, Issue 2, 2020, Pages 45-58]
  • Sepehry, N. Experimental investigation of the jamming phenomenon in fixturing of workpiece using the peg-in-hole mechanism [Volume 10, Issue 3, 2020, Pages 77-89]
  • Sepehry, N. Online health monitoring of marine structures using electromechanical impedance spectroscopy: A simulation approach [Volume 10, Issue 4, 2021, Pages 67-76]
  • Sepehry, N. Mathematical model of a vacuum box electric furnace for online computation: A nonlinear ordinary differential equation model and experimental verification [Volume 12, Issue 1, 2022, Pages 145-157]
  • Setoodeh, A.R. Transient Analysis of Functionally Graded Cylindrical Shells Subjected to Asymmetric Thermo-mechanical Shock Loads with Temperature Dependent Material Properties [Volume 9, Issue 2, 2019, Pages 153-166]
  • Seyedkashi, M. H. Finite Element Simulation & Experimental Study on Forming of Conical Parts by HDDRP: Process Window Diagram [Volume 5, Issue 4, 2016, Pages 139-150]
  • Seyedkashi, S.M. Hossein Numerical and Experimental Analysis of Bowing Defect in the Flexible Roll Forming Process of Copper-Aluminum Double Layer Sheets [Volume 13, Issue 6, 2024, Pages 75-87]
  • Seyyedi, J. Analytical and numerical survey of FG sandwich beams under the local loading and temperature-dependent properties [Volume 5, Issue 4, 2016, Pages 127-137]
  • Seyyed Jafari, Seyyed A. Investigation Axisymmetric Aerospike Nozzle [Volume 9, Issue 3, 2019, Pages 177-189]
  • Shabani, M. H. Application and Comparison of Pressure and Velocity Correction Methods and Boundary Conditions in WCSPH Method for numerical modelling of 3D Inviscid Fluid Flow [Volume 9, Issue 4, 2019, Pages 227-236]
  • Shabgard, Hojjat Numerical simulation of electroosmotic flow in two micropumps with series connection to evaluate the increase in performance of integrated micropump [Volume 12, Issue 5, 2022, Pages 237-251]
  • Shaeri, J. Analysis of using nano aerogel glazing on solar heat gain and cooling load in an office at hot and dry, hot and humid and cold climates of Iran [Volume 7, Issue 4, 2018, Pages 209-221]
  • Shafiey Dehaj, Mohammad Numerical analysis of fluid flow and combined natural and force convection heat transfer for nanofluid in concentric /eccentric rotating cylinders [Volume 13, Issue 5, 2023, Pages 77-89]
  • Shahani, A. R. Modeling of Mixed Mode Fracture Tests Using Extended Finite Element Method [Volume 5, Issue 2, 2015, Pages 123-137]
  • Shahbazi, H. Design of a Fractional-order PID controller and a Commen PID controller with Experimental Evaluation of them on Performance of Attitude Control of a quadrotor [Volume 8, Issue 2, 2018, Pages 37-50]
  • Shahbazian, H.R. Aerothermal Analysis of Rotation and Rotational Buoyancy Effect on Internal Cooling of Gas Turbine Blade- An Experimental study [Volume 8, Issue 3, 2018, Pages 277-288]
  • Shahbazian, H.R. Thermo-Fluid Investigation on the Effect of Rotation on Film Cooling Performace at Pressure & Suction Side of the Leading-Edge of a Gas Turbine Blade [Volume 11, Issue 5, 2021, Pages 133-148]
  • Shahbazi Karami, J. Experimental Investigation and Optimization of Bi-Layered Tube Hydroforming Process Parameters with Particle Swarm Optimization Algorithm [Volume 7, Issue 2, 2017, Pages 45-53]
  • Shahgholi, M. Free lateral vibration analysis of inhomogeneous beams under various boundary conditions [Volume 8, Issue 3, 2018, Pages 123-135]
  • Shahi, A. CFD Simulation of Anode Solid Oxide Fuel Cell [Volume 9, Issue 1, 2019, Pages 217-235]
  • Shahini, Ali Error estimation based on stress recovery by adaptivity in nonlinear problems of elasto-plasticity behavior by isogeometric method [Volume 13, Issue 3, 2023, Pages 67-84]
  • Shahmardan, MM Non-newtonian fluid flow in axisymmetric sudden expansion [Volume 1, Issue 3, 2012, Pages 69-79]
  • Shahnazari, Ali Investigating the performance of a solar still coupled with a semitransparent photovoltaic module under various wind speed conditions [Volume 13, Issue 4, 2023, Pages 135-146]
  • Shahnazari, M. R. Fractal Analysis of Viscous Fingering Instability of Two Reactive Miscible Fluids through Homogeneous Porous Media [Volume 9, Issue 1, 2019, Pages 265-278]
  • Shahnazari, M. R. Optimization of Heating Element Profile of Ljungstrom Using Discrete Orthogonal Functions and Adjoint Method [Volume 11, Issue 4, 2021, Pages 149-163]
  • Shahnazari, M. R. Dynamic Analysis and Control of Two Phase Flow Instability in Boilnig Channel [Volume 11, Issue 5, 2021, Pages 165-181]
  • Shahnazari, M.R. Analytical and numerical investigation of fluid flow instability in porous media with the Forchheimer coefficient impact [Volume 7, Issue 4, 2018, Pages 97-104]
  • Shahnazi, Mohammad Reza Stability and dynamic analysis of Rayleigh functionally graded porous beams with longitudinal motion in hygro-thermo-magnetic environments [Volume 13, Issue 2, 2023, Pages 1-13]
  • Shahravi, M. Analytical investigation of the leg geometric characteristics effect of the electronic board on the shock transmission caused by satellite separation [Volume 13, Issue 1, 2023, Pages 15-23]
  • Shahriari, A.R. Numerical study of effect of uniform sinusoidal roughness elements on nanofluid natural convection, using lattice Boltzmann method [Volume 8, Issue 4, 2019, Pages 273-286]
  • Shahriari, B. Thickness optimization of the airplane wing box components by the design of experiments method [Volume 13, Issue 1, 2023, Pages 43-56]
  • Shahriari, Behrooz Nonlinear Thermo-Elastic Analysis of FG Cylinder with Temperature-Dependent Properties with Perturbation and Differential Quadrature Methods [Volume 13, Issue 4, 2023, Pages 1-14]
  • Shahrjerdi, A. Investigating the ratcheting and shakedown behavior of a carbon steel sheet under cyclic thermal loading and axial loading using Bree diagram [Volume 11, Issue 6, 2022, Pages 143-157]
  • Shahsavand, M.S. Experimental and Numerical Investigation of Water Impact on Hull of Seaplane UAV [Volume 11, Issue 1, 2021, Pages 227-238]
  • Shahveh, R. Free nonlinear vibration analyzing of annular sector plate in contact with fluid [Volume 11, Issue 2, 2021, Pages 73-86]
  • Shahverdi, H. Limit cycle oscillations in swept wings based on fully intrinsic equations and considering the static stall effects [Volume 11, Issue 6, 2022, Pages 207-217]
  • Shahverdy Ghahfakhri, A. Investigation of the effect of cavity insertion in brick on heat transfer through using computational fluid dynamic simulation [Volume 10, Issue 2, 2020, Pages 267-283]
  • Shamaei-Kashani, A.R. A novel theoretical and numerical model to predict stiffness of double lap bonded joints under dynamic loading [Volume 10, Issue 3, 2020, Pages 135-145]
  • Shamaghdari, S. Output Feedback smooth switching control design for switched uncertain linear parameter-varying systems [Volume 11, Issue 6, 2022, Pages 27-44]
  • Shams, Reza A Rule-based Evaluation of Ladder Logic Diagram and Timed Petri Nets for Programmable Logic Controllers [Volume 2, Issue 3, 2012, Pages 29-34]
  • Shamshirsaz, M. Online health monitoring of marine structures using electromechanical impedance spectroscopy: A simulation approach [Volume 10, Issue 4, 2021, Pages 67-76]
  • Shamsoddini, R. 2D and 3D Numerical Investigation of the Super Cavitation Phenomena in the case of Injection and No Injection of the Air and Water vapour on the Under Water Vehicle [Volume 8, Issue 1, 2018, Pages 229-240]
  • Shamsoddini, R. Numerical analysis of mixed electroosmotic/pressure driven flow using an improved weakly compressible Smoothed Particle Hydrodynamics method [Volume 11, Issue 4, 2021, Pages 121-131]
  • Shamsodini, S. Thermodynamic Simulation of Ejector-Expansion Refrigerator Cooler [Volume 5, Issue 2, 2015, Pages 181-189]
  • Shams Taleghani, A. Numerical Study of Shock-Boundary Layer Interaction on an Airfoil with Cavity and Porous Surface: Parametric Investigation in a Transonic Flow [Volume 6, Issue 2, 2016, Pages 271-284]
  • Shams Taleghani, A. Numerical Study of Slot Lip Effects on Aerodynamics Performance of a Two-Element Airfoil with the Approach of Decreasing the Landing Distance [Volume 13, Issue 1, 2023, Pages 99-109]
  • Sharaf Baygi, Ahmad Experimental investigation of the different kinds of vortex generator effects on a air-water finned tube heat exchanger using exergy analysis [Volume 2, Issue 4, 2013, Pages 61-75]
  • Sharafi, A. Numerical Investigation of Longitudinal and Vertical Positions of Canard on Pressure Distribution and Aerodynamic Coefficients of a Maneuverable Aircraft Wing Model [Volume 6, Issue 4, 2016, Pages 301-316]
  • Sharbatiyan, Mohammad Hossein Study on performance of floating solar still using pumice stone as photothermal material [Volume 13, Issue 3, 2023, Pages 129-142]
  • Sharhani, S. Second Law Analysis of Micropolar Fluid Flow Between Two Inclined Parallel Plates [Volume 7, Issue 1, 2017, Pages 289-300]
  • Shariati, A. A numerical study of the effects of effective parameters on porous medium burner by creating a groove in the porosity matrix with the aim of reducing NOx emissions [Volume 8, Issue 3, 2018, Pages 327-340]
  • Shariati, Zahra A study on performance of different cooling flow fields with parallel channels in polymer electrolyte membrane fuel cell [Volume 4, Issue 3, 2014, Pages 109-121]
  • Shariat panahi, M. optimization of locomotive structure by using of natural frequency and maximum stress constraints [Volume 8, Issue 1, 2018, Pages 23-33]
  • Sharifi, V. Experimental Investigation into the Behaviour of FMLs Containing Nanoparticles under Repeated Low-velocity Impact [Volume 11, Issue 6, 2022, Pages 187-206]
  • Sharifnia, M. Fractional-order super-twisting nonsingular terminal sliding mode control of 2-DOF robotics manipulators [Volume 11, Issue 2, 2021, Pages 41-56]
  • Sharifnia, Mahnaz Kinematic and inverse kinematic analysis of hybrid Delta parallel robot with spherical wrist using Adptive Neuro Fuzzy Inference System [Volume 12, Issue 5, 2022, Pages 13-30]
  • Shariyat, M. Bending analysis of sandwich and laminated composite plates containing piezoelectric layers by improved global-local theory [Volume 6, Issue 2, 2016, Pages 121-137]
  • Shariyat, M. Non-linear finite element low-velocity impact response analysis of a viscoelastic composite plate, employing a layerwise theory [Volume 6, Issue 3, 2016, Pages 97-108]
  • Shariyat, M. Stress analysis of circular plates with variable thickness as transverse asymmetric [Volume 9, Issue 1, 2019, Pages 97-109]
  • Shariyat, M. Stress and displacement analysis of thick sandwich plates with deformable auxetic cores using an enhanced third order global-local theory [Volume 9, Issue 2, 2019, Pages 109-122]
  • Shariyat, Mohammad Nonlinear numerical elasticity analysis of eccentric low-velocity impact of rectangular sandwich plate with composite face sheets subjected to biaxial preloads [Volume 5, Issue 1, 2015, Pages 87-99]
  • Shaterzadeh, A.R. Thermo-Mechanical Buckling Analysis of FGM Plates with Circular Cut Out [Volume 5, Issue 2, 2015, Pages 99-109]
  • Shayan, E. Numerical simulation of incompressible viscous external flow using mesh-free lattice Boltzmann method [Volume 4, Issue 4, 2015, Pages 175-189]
  • Shayestefar, M. The investigation of microstructure and mechanical properties of metallic glass/ceramic reinforced hybrid Al matrix composite used as foam precursor material [Volume 10, Issue 2, 2020, Pages 153-162]
  • Sheibani, A. L1 adaptive controller design of a space system considering structural flexibility [Volume 6, Issue 2, 2016, Pages 17-27]
  • Sheikhi, M. Experimental Investigation and Optimization of Bi-Layered Tube Hydroforming Process Parameters with Particle Swarm Optimization Algorithm [Volume 7, Issue 2, 2017, Pages 45-53]
  • Sheikhi, M.M. Experimental analysis, mathematical modeling and Sobol sensitivity analysis of surface roughness in orthopedic milling process (polymethylmethacrylate) [Volume 11, Issue 1, 2021, Pages 139-152]
  • Sheikhi Azqandi, Mojtaba Optimum Shape Design of Axisymmetric Extrusion Die by using Hybrid Meta-Heuristic Optimization (ICACO) [Volume 13, Issue 4, 2023, Pages 107-117]
  • Sheikhlou, Mehrdad Vibration Analysis of Circular Nanoplates under Nonlinear Electrostatic Excitation Considering the Surface Energy and Size Effects [Volume 12, Issue 5, 2022, Pages 133-146]
  • Sheikh Mohammadi, A. Influence of gas channels and Gas Diffusion Layers configuration on the performance of Polymer Electrolyte Membrane Fuel Cell [Volume 9, Issue 3, 2019, Pages 249-263]
  • Sheikholeslani, Mohammad Reza Numerical study of the use of focused ultrasound waves by the phased array method in the inspection of polyethylene pipe joints. [Volume 13, Issue 5, 2023, Pages 155-165]
  • Sheykholeslami, M. R. Investigation of operational parameters on the motional behavior and maximum particle levitated density in ultrasonic levitation [Volume 11, Issue 3, 2021, Pages 71-84]
  • Sheykholeslami, M.R. Optimization of ultrasonic transducer horn geometry with vibrational-thermal performance improvement approach [Volume 11, Issue 1, 2021, Pages 31-42]
  • Sheykholeslami, M.R. A numerical feasibility study on using piezoelectric pumps as dosing pumps by implementing fluid-structure interaction [Volume 12, Issue 1, 2022, Pages 175-189]
  • Shirafkan, Mostafa Failure prediction in defective pipelines using finite element simulation of fluid-structure interaction and neural network method [Volume 13, Issue 5, 2023, Pages 105-120]
  • Shiraghaei, H. The investigation of microstructure and mechanical properties of metallic glass/ceramic reinforced hybrid Al matrix composite used as foam precursor material [Volume 10, Issue 2, 2020, Pages 153-162]
  • Shirani, Amir Saeed Comparative investigation of nanofluid heat transfer in vertical annular channel with cosine heat flux by experimental and numerical methods [Volume 13, Issue 4, 2023, Pages 147-158]
  • Shirani, M. Thickness optimization of the airplane wing box components by the design of experiments method [Volume 13, Issue 1, 2023, Pages 43-56]
  • Shishehsaz, M Transient Stress Analysis In Adhesive Single Lap Joints of a Composite Material Due To Fiber Breakage [Volume 4, Issue 4, 2015, Pages 113-126]
  • Shishesaz, M. An analysis of stresses evaluation efficacy in adhesive single-lap joints [Volume 6, Issue 4, 2016, Pages 49-58]
  • Shiva, M. Investigation of rubber formulation by measuring ultrasonic propagation velocity [Volume 6, Issue 2, 2016, Pages 285-294]
  • Shojaee, T. Solving the inverse problem of identification of FE model parameters of a non-uniform beam using genetic algorithms [Volume 5, Issue 1, 2015, Pages 39-48]
  • Shojaeefard, M. H. Analysis of the blade thickness distribution effects on the turbocharger turbine performance at full and partial admission condition [Volume 10, Issue 1, 2020, Pages 297-311]
  • Shojaeefard, M.H. Tank vehicles rollover threshold acceleration under fluid sloshing considering the method of mapping [Volume 5, Issue 4, 2016, Pages 163-176]
  • Shojaeefard, M.H. Frequency Analysis of Vortex Shedding in Cascade of an Axial Compressor in Moderate Reynolds Numbers [Volume 6, Issue 1, 2016, Pages 19-27]
  • Shojaei, F. Investigating the influencing parameters on blood flow of grafted vessel in coronary artery bypass surgery [Volume 10, Issue 4, 2021, Pages 317-329]
  • Shojaie fard, Mahammad hasan Side panel of B-Class body in white vehicle design and side crash finite element simulation [Volume 5, Issue 3, 2015, Pages 51-64]
  • Shokati, Naser Thermodynamic and Exergoeconomic Analysis of Combination of Single-Flash Geothermal Power Cycle with Kalina and ORC with different Organic Fluids [Volume 5, Issue 1, 2015, Pages 177-192]
  • Shokri, Y. Modeling and analysis of total site cogeneration of heat and power from an exergoeconomic approach in a 100MW case study [Volume 11, Issue 5, 2021, Pages 247-258]
  • Shokrollahi, H. Surface Energy Effect on Free Axial Vibration of Cracked Nanorods Made of Functionally Graded Materials Based on Rayleigh Theory [Volume 12, Issue 4, 2022, Pages 103-116]
  • Shokrollahi, S. Aeroelastic nonlinear analysis of a high aspect ratio wing with store flow steady incompressible [Volume 6, Issue 2, 2016, Pages 259-269]
  • Shoul, Nasrin Numerical analysis of fluid flow and combined natural and force convection heat transfer for nanofluid in concentric /eccentric rotating cylinders [Volume 13, Issue 5, 2023, Pages 77-89]
  • Siavashi, M. Experimental investigation and estimation of thermal conductivity and contact conductance of granular activated carbon packed bed as a function of density [Volume 10, Issue 2, 2020, Pages 193-204]
  • Silani, M. Finite Element Simulation and Analysis of Deposition Process and Thermal Loading on Thermal Barrier Coatings [Volume 10, Issue 4, 2021, Pages 41-51]
  • Smith, C.R. Comparison the Performance of Rajagopal Musculoskeletal Model and its Updated Versions in Prediction of the Knee Joint Contact Forces During Walking and Squatting [Volume 11, Issue 5, 2021, Pages 83-94]
  • Sohrabi, M. R Layered finite element analysis of laminated composite plates by using unsymmetric membrane element and non-conforming bending element [Volume 10, Issue 2, 2020, Pages 141-152]
  • Sojoudi, A. Comparative Study of Carbone Monoxide and Temperature Vertical Distribution in Tunnel Fires [Volume 5, Issue 4, 2016, Pages 1-13]
  • Sojoudi, A. Numerical Study of Carbon Monoxide and Temperature Distribution in Tunnel Fires Employing Air Curtain [Volume 5, Issue 3, 2015, Pages 235-246]
  • Soleimanimehr, Hamid Investigation on the effect of laser cladding parameters of Inconel 713 LC by Metco 81VF powder on the microstructure characteristics and micro hardness of coating [Volume 12, Issue 5, 2022, Pages 93-108]
  • Soleymani, M. Investigation of Resin Pocket Area Effect on Crack Growth in Foam Core of Composite Wind Turbine Blade by the Finite Element Method [Volume 8, Issue 4, 2019, Pages 27-38]
  • Soleymani, M. Active Vibration control and reduction of shear force of 5MW wind turbine with the help of gyroscope actuator [Volume 11, Issue 2, 2021, Pages 99-118]
  • Soleymani Yazdi, Mohammad Reza Experimental evaluation of the tool rotation speed and feed rate on micro hardness and microstructure of 5456 aluminum alloy in friction stir welding process [Volume 3, Issue 3, 2013, Pages 1-10]
  • Soltani, A. Vehicle yaw stability improvement via active braking system using adaptive sliding mode control [Volume 7, Issue 1, 2017, Pages 65-78]
  • Soltani, A. A new estimation approach of road friction coefficient and optimum wheel slip ratio for longitudinal and lateral vehicle dynamics control using active steering and braking [Volume 9, Issue 3, 2019, Pages 231-247]
  • Soltani, B. Numerical study of side fixture and feed rate method for decrease of force imposed by spindle of machine on the incremental forming groove test [Volume 6, Issue 2, 2016, Pages 61-67]
  • Soltani Gerdefaramarzi, M. Robust estimation of spring stiffness in a Shape Memory Alloy actuator using Extended Kalman Filter [Volume 5, Issue 4, 2016, Pages 69-81]
  • Soltani Goharrizi, A. investigation of rheological behavior of suspensions included power-law fluid by combined lattice-Boltezmann method with smoothed profile method [Volume 9, Issue 2, 2019, Pages 197-210]
  • Soltani Goharrizi, Ataallah Numerical Study of Solid Particle Deposition on a Square Filter Using Lattice Boltzmann Method [Volume 5, Issue 2, 2015, Pages 249-260]
  • Soltanpour, M.R. A New Adaptive Fuzzy Integral Sliding Mode Controller Design for Electrically Driven Nonholonomic Wheeled Mobile Robots [Volume 6, Issue 2, 2016, Pages 41-59]
  • Soltanpour, M.R. Adaptive Fuzzy Sliding Mode Position and Attitude Control for a Quadrotor UAV [Volume 7, Issue 4, 2018, Pages 159-172]
  • Soltanpour, M.R. Control of a Class of Underactuated Mechanical Systems by Using Fuzzy Sliding Mode Control with low computing volume and without Chattering [Volume 8, Issue 3, 2018, Pages 107-122]
  • Soorgi, M. Experimental investigation of effect of inlet direction and height on flow pattern and thermal comfort conditions under personalized confluent jets ventilation system [Volume 11, Issue 3, 2021, Pages 195-205]
  • Soori, Mohamad Mahdi Guidance and control of the Pitch channel of an interceptor missile using neural sliding mode control [Volume 13, Issue 6, 2024, Pages 59-73]
  • Soori, Seyed Josein Guidance and control of the Pitch channel of an interceptor missile using neural sliding mode control [Volume 13, Issue 6, 2024, Pages 59-73]
  • Soroushan, M. Modeling and numerical analysis of a turbine stator vane performance from the second law of thermodynamics view point [Volume 11, Issue 1, 2021, Pages 185-198]
  • Sousanabadi Farahani, Amin Investigating factors affecting electrode wear rate in electrical discharge machining of AZ91 magnesium alloy metal matrix composite reinforced with silicon carbide microparticles [Volume 13, Issue 4, 2023, Pages 119-134]

T

  • Tabibi, E. Numerical Investigation and Enhancement of Flushing Performance in the Micro-Electro Discharge Machining by Considering the Hole Depth and Dielectric Fluid [Volume 11, Issue 1, 2021, Pages 111-122]
  • Taeibi Rahni, M. Force Convection Heat Transfer from a Stationary circular Cylinder in Non-Newtonian Fluids [Volume 5, Issue 4, 2016, Pages 229-242]
  • Taghavi Fadaki1, S. Numerical investigation of collecting wire electrode effect on the flow field and heat transfer with electrohydrodynamic actuator [Volume 6, Issue 1, 2016, Pages 201-213]
  • Taghavi-Ganji, Amir Hossein Multi-scale Electrochemical-mechanical Modeling of Fast Response of Ionic Polymer-Metal Composite Actuator [Volume 13, Issue 6, 2024, Pages 31-46]
  • Taghavi Zenouz, R. Experimental and Numerical Investigation of grooved shroud Effects on Tip Leakage Fluctuation in an axial compressor [Volume 7, Issue 4, 2018, Pages 267-278]
  • Taghipour, A.M. Simulation of the Convective Heat Transfer in a Nanofluid Composed of Water and FMWNT Carbon Nanotubes in a Microchannel Subjected to a Magnetic Field in the Slip Flow Regime [Volume 5, Issue 3, 2015, Pages 209-222]
  • Taghizade Anvar, A. A. Designing of a High Sensitivity Graphene Mass Sensor for Measuring Different Mass Distributions Based on Nonlinear Frequency Shift [Volume 10, Issue 4, 2021, Pages 27-40]
  • Taghizadeh, M. A. Numerical Simulation of Wind Interference Effects Around a Group of Tall Buildings [Volume 5, Issue 2, 2015, Pages 285-301]
  • Taghvaei, Sajjad Investigating the effects of geometric and environmental parameters on the governing equations of scanning earth horizon sensor and attitude determination error analysis [Volume 12, Issue 5, 2022, Pages 73-91]
  • Tahani, M. Thermodynamic Simulation of Ejector-Expansion Refrigerator Cooler [Volume 5, Issue 2, 2015, Pages 181-189]
  • Tahani, M. Investigation of Resin Pocket Area Effect on Crack Growth in Foam Core of Composite Wind Turbine Blade by the Finite Element Method [Volume 8, Issue 4, 2019, Pages 27-38]
  • Tahani, M. Transient Analysis of Functionally Graded Cylindrical Shells Subjected to Asymmetric Thermo-mechanical Shock Loads with Temperature Dependent Material Properties [Volume 9, Issue 2, 2019, Pages 153-166]
  • Taheri, M. Investigation of rubber formulation by measuring ultrasonic propagation velocity [Volume 6, Issue 2, 2016, Pages 285-294]
  • Taheri, M. Reducing the undesirable effects of thermal asymmetry for a bus passengers by using airflow asymmetry under summer conditions [Volume 8, Issue 1, 2018, Pages 135-146]
  • Taheri, M. The Second Phase of Gold Nanoparticle Manipulation based on AFM in Different Liquid Environments [Volume 13, Issue 1, 2023, Pages 137-146]
  • Taheri, Moein Extraction of force and critical time of three-dimensional manipulation of colon cancer tissue with different models of Persson friction [Volume 12, Issue 6, 2023, Pages 113-123]
  • Taheri, Moein Experimental and theoretical investigation of Young's modulus of liver cancer tissue using rectangular, V-shaped and dagger cantilevers of an atomic force microscope [Volume 13, Issue 5, 2023, Pages 121-135]
  • Taheri, Moein Experimental extraction of modulus of elasticity of gastric cancer tissue using cylindrical developed contact mechanics models [Volume 13, Issue 4, 2023, Pages 83-94]
  • Taheripour, S. Simulation of Two-Phase Oil and Air Flow of the Lower Bearing of Shahid Abbaspour Dam Power Plant Generator [Volume 9, Issue 1, 2019, Pages 203-216]
  • Tahmasbi, N. Control a class of fractional-order systems with delay in a specified sector [Volume 9, Issue 3, 2019, Pages 51-63]
  • Tahmasbi, V. Statistical modelling, optimization and Sobol sensitivity analysis of effective parameters on thrust force behavior in micro-drilling of glass/epoxy laminated composites [Volume 10, Issue 4, 2021, Pages 225-240]
  • Tahmasbi, V. Experimental analysis, mathematical modeling and Sobol sensitivity analysis of surface roughness in orthopedic milling process (polymethylmethacrylate) [Volume 11, Issue 1, 2021, Pages 139-152]
  • Tahmasbi, Vahid Numerical and experimental study of orthogonal cutting bone using elastic-plastic material model and dynamic damage model [Volume 12, Issue 6, 2023, Pages 49-65]
  • Tahmasbi, Vahid Investigating factors affecting electrode wear rate in electrical discharge machining of AZ91 magnesium alloy metal matrix composite reinforced with silicon carbide microparticles [Volume 13, Issue 4, 2023, Pages 119-134]
  • Tahmasebipour, M. Design and simulation of a two-axis thermal MEMS accelerometer with optimized sensitivity [Volume 8, Issue 2, 2018, Pages 13-24]
  • Tahmasebipour, M. Investigation of the effect of geometrical parameters on the out-of-plane displacement of a T-shaped piezoelectric microcantilever [Volume 8, Issue 4, 2019, Pages 1-9]
  • Tajik, M. Investigation of the effects of geometric parameters of layers on the formability of Aluminum/Polyurethane/Aluminum sandwich sheets [Volume 6, Issue 1, 2016, Pages 61-71]
  • Talaee, M. Analysis and modeling of aerodynamic pressure wave due to high-speed trains passage [Volume 6, Issue 3, 2016, Pages 65-78]
  • Talaee, Mohammad Reza Analysis of fire development in a passenger car considering various insulation [Volume 13, Issue 5, 2023, Pages 91-104]
  • Talaee, M. R. Aerodynamic analysis and modeling of effect of nose shape parameters on overturn of high speed train under crosswind [Volume 9, Issue 3, 2019, Pages 155-176]
  • Talati, F. Analytical and numerical solution for steady-state differential conduction equation in a right triangular plate with constant-temperature boundary condition [Volume 5, Issue 3, 2015, Pages 289-302]
  • Talebi, F. A DNS investigation of drag reduction phenomenon in turbulent flow of a viscoelastic fluid [Volume 7, Issue 1, 2017, Pages 255-274]
  • Talebi, M. Effect of using phase change materials in protective clothing on human thermal comfort under extreme cold conditions [Volume 7, Issue 4, 2018, Pages 239-249]
  • Talebi, Mansour Numerical Study of Thermo Hydraulic Effect of Wire Wrap Spacer with Different Pitch in Hexagonal Fuel Assembly [Volume 12, Issue 6, 2023, Pages 205-217]
  • Talebi, Mansour Comparative investigation of nanofluid heat transfer in vertical annular channel with cosine heat flux by experimental and numerical methods [Volume 13, Issue 4, 2023, Pages 147-158]
  • Talebi, M.H. Experimental study of the effect of position and intensity of a constant magnetic field on the forced convection heat transfer of Fe2O3 / water nanofluid in the developing thermal region [Volume 11, Issue 1, 2021, Pages 43-58]
  • Talebi, M. Hossein Experimental Investigation of the Forced Convective Heat Transfer of hybrid Cu / Fe3O4 Nanofluids [Volume 8, Issue 4, 2019, Pages 229-238]
  • Talebi, Sh. The Unsteady Behavior of the Natural Convection Heat Transfer in a Square Enclosure by 90° Rotate [Volume 5, Issue 2, 2015, Pages 329-339]
  • Talebi, Shahram Investigation of aspect ratio effect on focusing of Nano-bio particle in viscoelastic fluid [Volume 13, Issue 5, 2023, Pages 187-201]
  • Talebian, S. Experimental Study and Modelling of the Blocked Force of Terfenol-D Actuator [Volume 12, Issue 3, 2022, Pages 57-67]
  • Talebi-Ghadikolaee, H. Study of the Effect of Calibration Procedure on the Accuracy of the Phenomenological Ductile Fracture Criteria in Sheet Metal Forming [Volume 10, Issue 1, 2020, Pages 1-16]
  • Talebi-Ghadikolaee, H. Numerical and Experimental Study on Guillotine Shearing of a Complex Profile Produced by Roll Forming process [Volume 10, Issue 3, 2020, Pages 1-15]
  • Talebi-Ghadikolaee, Hossein Experimental investigation of the formability of heat treated AA6063 tubes using hydraulic rotary draw bending process [Volume 13, Issue 4, 2023, Pages 95-106]
  • Talebi-Ghadikolaei, Hossein Numerical Investigation of Bending Angle and Entropy Generation in Laser Forming of High Strength Steel [Volume 9, Issue 4, 2019, Pages 151-166]
  • Talebi Somesaraee, Makan Evaluation of different nucleation models and droplet radius averaging methods and their combination on condensing steam flow [Volume 5, Issue 1, 2015, Pages 193-209]
  • Talebitooti, M. Effects of boundary conditions, cone angle and core material on free vibration of the joined sandwich conical-conical shell [Volume 9, Issue 4, 2019, Pages 167-180]
  • Talebitooti, M. Introducing a novel corrugated profile generated from tangential circular curves to increase energy absorption [Volume 11, Issue 3, 2021, Pages 135-149]
  • Talebitooti, R. Tank vehicles rollover threshold acceleration under fluid sloshing considering the method of mapping [Volume 5, Issue 4, 2016, Pages 163-176]
  • Talebitooti, R. Dynamic Response of a Double Beam Interconnected by a Viscoelastic Layer Due to a Moving Vehicle with a Constant Acceleration [Volume 9, Issue 1, 2019, Pages 1-13]
  • Talebpour, Z. Optimal design of a three-outlet channel with specified outlet flow rates using the topology optimization method [Volume 11, Issue 1, 2021, Pages 153-168]
  • Tale Masouleh, Mehdi Workspace of 3-RRR parallel robot using the combination of interval analysis and refinement methods by considering the limitation of active joints movement [Volume 13, Issue 3, 2023, Pages 29-43]
  • Tamaskani, R. Aircraft Actuator Fault Diagnosis and Isolation using Robust Incremental Nonlinear Dynamic Inversion [Volume 10, Issue 3, 2020, Pages 103-120]
  • Tamimi, P. Investigation of single point incremental forming parameters effect on the blanks produced by friction stir welding [Volume 8, Issue 4, 2019, Pages 85-96]
  • Tavakkoli, F. Coupling of Dafalias-Popov’s Two-Surface Plasticity with Notch Stress-Strain Estimation Methods in Plane Stress Problems under Monotonic Uniaxial Loading [Volume 11, Issue 2, 2021, Pages 15-24]
  • Tavakkoli, Seyed M. Solution of Nonlinear Incompressible Hyperelastic Problems by Isogeometric Analysis Method [Volume 5, Issue 2, 2015, Pages 29-41]
  • Tavakkoli, S. M. Channels Flow Modeling by Using Isogeometric Analysis [Volume 5, Issue 4, 2016, Pages 15-26]
  • Tavakol, M. M. Experimental investigation of thermal structure and convection heat transfer from an array of perforated fins with one cross opening [Volume 5, Issue 3, 2015, Pages 197-208]
  • Tavakoli, Mehdi Numerical investigation of the effects of Helmholtz resonator and primary flow oscillations on subsonic ejector performance [Volume 13, Issue 5, 2023, Pages 19-42]
  • Tavakolifar, F. Experimental investigation and numerical simulation of solid fuel rocket engine internal ballistic [Volume 7, Issue 4, 2018, Pages 13-24]
  • Tavakoli saboor, Seyed Ali Numerical Simulation of Magneto-Hydrodynamics Effect on Supersonic Flow of A Projectile [Volume 13, Issue 5, 2023, Pages 43-57]
  • Tavalaee Fard, M. R. Reduced pressure drop in the air inlet of a cruise missile using adjoint optimization [Volume 10, Issue 2, 2020, Pages 205-217]
  • Tavasoli, A. Optimal Control of Skid Steer Wheeled Mobile Robots by Analytical Approach [Volume 7, Issue 4, 2018, Pages 135-145]
  • Taylor, W.R. Comparison the Performance of Rajagopal Musculoskeletal Model and its Updated Versions in Prediction of the Knee Joint Contact Forces During Walking and Squatting [Volume 11, Issue 5, 2021, Pages 83-94]
  • Tazimi, M. Experimental study of ّFafracture Surface Characteristics of Inhomogeneous Drop Weight Tear Test Specimen Made from API X65 Steel [Volume 10, Issue 1, 2020, Pages 77-91]
  • Tehrani, M. The Effect of Bending Deflection on the Strength Degradation of Homogenous and Hybrid Composites Reinforced with Brittle and Ductile Fibers [Volume 6, Issue 1, 2016, Pages 11-18]
  • Teimouri, A. Numerical investigation of two-phase nanofluid flow in square cavity with inclined wall under different magnetic field [Volume 13, Issue 1, 2023, Pages 125-136]
  • Teymouri, H. Green’s functions resulting from wave propagation in a single-layer porous isotropic foam with finite thickness [Volume 12, Issue 4, 2022, Pages 13-26]
  • Teymourtash, A.R. Effect of Plate Numbers on Optimal Condition of Gasket Heat Exchanger with Graphene-Carbon Nanotube Hybrid [Volume 11, Issue 5, 2021, Pages 149-163]
  • Teymourtash, A.R. Numerical investigating of using the air duct and body side curvature effects on the Tara aerodynamic performance [Volume 13, Issue 1, 2023, Pages 71-86]
  • Tikani, V. Design of a Fractional-order PID controller and a Commen PID controller with Experimental Evaluation of them on Performance of Attitude Control of a quadrotor [Volume 8, Issue 2, 2018, Pages 37-50]
  • Toghraie, D. Thermodynamic Analysis of Feed Water Heating Repowering of Mohammad Montazeri Steam Power Plant [Volume 6, Issue 2, 2016, Pages 311-328]
  • Tooranjipour, P. Analysis of plates under the application of moving concentrated loads using a meshfree method with adaptive re-arrangement of nodes [Volume 8, Issue 4, 2019, Pages 11-25]
  • Torabi, A.R. Fracture prediction of key-hole notched graphite plates by using the strain energy density based on the equivalent factor concept [Volume 7, Issue 2, 2017, Pages 1-15]
  • Torkaman Asadi, M. J. Investigations of Transient Thermal Response of Pulse Detonation Engine Tube under Sequential Operation [Volume 9, Issue 1, 2019, Pages 153-171]
  • Tourajizadeh, H. Modeling and Control of a 3PRS Robot Using Lagrange Method [Volume 9, Issue 3, 2019, Pages 25-38]
  • Tourang, H. Electro–Magneto–Thermo-Mechanical Analysis of polymeric Smart Rotating Disk Reinforced WithMultiwalled Carbon Nanotubes with Nonlinear Behavior [Volume 6, Issue 2, 2016, Pages 97-108]

V

  • Vahdati, A.R. Experimental Analysis the Effect of Lubricant and Ultrasonic Excitation of Hemispherical-head Tool on the Vertical Component of Forming Force in SPIF [Volume 8, Issue 2, 2018, Pages 107-123]
  • Vahdati, M. Experimental Analysis the Effect of Lubricant and Ultrasonic Excitation of Hemispherical-head Tool on the Vertical Component of Forming Force in SPIF [Volume 8, Issue 2, 2018, Pages 107-123]
  • Vahdati, M. Statistical Analysis of Parameters Affecting the Mechanical Properties of Surface Composite Al7075/Al2O3 Produced by Friction Stir Processing Using Response Surface Methodology [Volume 9, Issue 3, 2019, Pages 81-94]
  • Vahdati, M. Theoretical and Numerical Analysis of Hot Deep Drawing of Hemispherical Thick Head [Volume 10, Issue 2, 2020, Pages 59-78]
  • Vahdati, M. Statistical analysis and optimization of parameters affecting the hardness of butt joint cross-section of Al7075 produced by FSW and SFSW using RSM and desirability approach [Volume 10, Issue 4, 2021, Pages 165-180]
  • Vahedi, Kh. Evaluation of the projectile penetration models in the metal and ceramic targets [Volume 9, Issue 4, 2019, Pages 77-92]
  • Vahedi, Kh. Analytical, experimental and numerical investigation of ballistic performance of ceramic composite targets [Volume 10, Issue 3, 2020, Pages 31-45]
  • Vahedi, Kh. An analytical model Presentation and experimental investigation of the penetration ‎depth of the rigid blunt projectile on the perforated metal plate [Volume 10, Issue 4, 2021, Pages 241-251]
  • Vahidi, B. The Effect of the Kind of Attachment of Primary Cilium to Cell in Its Response to the Fluid Flow: A 3D Computational Simulation [Volume 8, Issue 1, 2018, Pages 203-213]
  • Vahidi, B. Computational simulation of airflow in the human trachea-bronchial airways [Volume 8, Issue 2, 2018, Pages 125-142]
  • Vahidi, B. Investigating the effects of microtubules in the neuronal cell response to the blast load using fluid-structure interactions method [Volume 9, Issue 3, 2019, Pages 13-24]
  • Vahidi, Mohsen Experimental Investigation of Air Flow Velocity Profiles Effects on the Wires and Cables of Power Transmission Lines and Supporting Devices [Volume 2, Issue 1, 2012, Pages 83-97]
  • Vahidnia, M. Improving the Accuracy of Crack Length Measurement in Clay Brick Using Machine Vision [Volume 5, Issue 2, 2015, Pages 111-122]
  • Vakilinazhad, R. Analysis of using nano aerogel glazing on solar heat gain and cooling load in an office at hot and dry, hot and humid and cold climates of Iran [Volume 7, Issue 4, 2018, Pages 209-221]
  • Valadi, M. Sensitivity Analysis of Maneuverability of an AUV to Added Mass Coefficients Variations [Volume 9, Issue 2, 2019, Pages 1-13]
  • Valefi, Z. The effect of interlayer on the microstructural characteristic and mechanical properties of diffusion welding between 17-4PH steel and Ti6Al4V alloy [Volume 12, Issue 3, 2022, Pages 45-56]
  • Valefi, Z. The effect of diffusion welding parameters on the microstructural characteristics and mechanical properties of dissimilar joint between 17-4PH steel and Ti6Al4V alloy using nickel interlayer [Volume 12, Issue 4, 2022, Pages 41-54]
  • Valipour, A. Simulation of Focusing Phased Array Ultrasonic in Dissimilar Metal Welds for Detecting the Defects [Volume 9, Issue 2, 2019, Pages 77-92]
  • Valipour, M. S. Numerical Solution of Natural Convective Heat Transfer of Al2O3/Water Nanofluids in a Square Cavity with Modified Circular Corners [Volume 7, Issue 1, 2017, Pages 315-328]
  • Valipoure, M.S. The Effects of Magnetic Field on The Convective Heat Transfer Around a Solid Cylinder Wrapped by a Porous Sheath [Volume 4, Issue 4, 2015, Pages 191-205]
  • Valizade, E. The effects of processes heating and evaporation of droplet on the Low frequency combustion instability [Volume 7, Issue 4, 2018, Pages 251-265]
  • Varedi_Koulaei, Seyyed Mojtaba Improving the Dynamic Properties of the Crank-Slider Mechanism with Joint Clearance Using Optimal Flexure Joint [Volume 12, Issue 3, 2022, Pages 1-12]
  • Varmazyar, M. Stability Analysis of Natural Convection with Variable Physical Coefficients Using Linear Stability Theory [Volume 8, Issue 1, 2018, Pages 157-169]
  • Varmazyar, M. Numerical investigation of sensitivity of AUV dynamic coefficients and added mass to variations in amplitude and frequency of excitation [Volume 10, Issue 4, 2021, Pages 195-208]
  • Varshovi-Jaghargh, Payam Workspace of 3-RRR parallel robot using the combination of interval analysis and refinement methods by considering the limitation of active joints movement [Volume 13, Issue 3, 2023, Pages 29-43]
  • Vasefi, Seyed I. Analysis of mixed convection heat transfer of CuO-water nanofluid in a vertical square duct using two phase Euler-Lagrange approach [Volume 6, Issue 2, 2016, Pages 227-244]
  • Vaseghi, M. Effect of repair welds on the microstructure and mechanical properties of 9Cr1Mo welding joint [Volume 10, Issue 2, 2020, Pages 29-44]
  • Vatankhah, R. Free vibration and static deflection of a micro-plate with piezoelectric layers using modified couple stress theory [Volume 7, Issue 4, 2018, Pages 25-34]
  • Vatankhah, R. Analysis of plates under the application of moving concentrated loads using a meshfree method with adaptive re-arrangement of nodes [Volume 8, Issue 4, 2019, Pages 11-25]
  • Vatankhah, Ramin Investigating the effects of geometric and environmental parameters on the governing equations of scanning earth horizon sensor and attitude determination error analysis [Volume 12, Issue 5, 2022, Pages 73-91]
  • Vaziri, M. A. Numerical Comparison of Mechanical Vanes and Blowing Jet Flow Control Effects In a Diffusing Curved Duct [Volume 7, Issue 1, 2017, Pages 231-254]
  • Vaziri, M. A. Numerical and experimental fatigue life estimation of airplane emergency door bracket in various mission profiles [Volume 8, Issue 4, 2019, Pages 143-152]

Y

  • Yadegari, M. Shock capturing method by numerical dissipation control on symmetric airfoil [Volume 6, Issue 1, 2016, Pages 285-304]
  • Yadegari, M. Numerical Study of Shock-Boundary Layer Interaction on an Airfoil with Cavity and Porous Surface: Parametric Investigation in a Transonic Flow [Volume 6, Issue 2, 2016, Pages 271-284]
  • Yadegari, M. The Investigation of the effect of the helical strakes'height on the cylindrical wake [Volume 10, Issue 1, 2020, Pages 223-236]
  • Yaghooti, B. Force and stress analysis of double press machine in use with single-action die press [Volume 6, Issue 1, 2016, Pages 167-177]
  • Yaghootian, A. Simulation of Focusing Phased Array Ultrasonic in Dissimilar Metal Welds for Detecting the Defects [Volume 9, Issue 2, 2019, Pages 77-92]
  • Yaghoti, M. Model Reference Adaptive Control with Artificial Neural Network Compensator of 6 DOF Autonomous Underwater Vehicle [Volume 7, Issue 3, 2017, Pages 165-184]
  • Yaghoubi, M. Experimental investigation of thermal structure and convection heat transfer from an array of perforated fins with one cross opening [Volume 5, Issue 3, 2015, Pages 197-208]
  • Yaghoubi, M. Analysis of using nano aerogel glazing on solar heat gain and cooling load in an office at hot and dry, hot and humid and cold climates of Iran [Volume 7, Issue 4, 2018, Pages 209-221]
  • Yaghoubi, Mahmood On the natural convective heat transfer from a cold horizontal cylinder over an adiabatic surface [Volume 2, Issue 3, 2012, Pages 19-28]
  • Yaghoubi, S Transient Stress Analysis In Adhesive Single Lap Joints of a Composite Material Due To Fiber Breakage [Volume 4, Issue 4, 2015, Pages 113-126]
  • Yaghoubi Nejad, Yadollah Experimental comparison of microstructure and surface properties of Al / Al2O3 sample produced by powder metallurgy and spark plasma sintering methods [Volume 12, Issue 5, 2022, Pages 123-132]
  • Yahyaei, R. Reduction of fore-aft vibration to truck's driver by tunning the seat backrest [Volume 7, Issue 3, 2017, Pages 29-39]
  • Yarahmadi, M Wavelet Sliding-Mode Control with Varying Boundary Layer via Time-Variant Sliding Function for Pitch Autopilot [Volume 4, Issue 1, 2014, Pages 93-106]
  • Yari, Ehsan Numerical investigation of the blades number effect on the bipolar noise radiation level caused by the high skew propeller [Volume 13, Issue 3, 2023, Pages 143-158]
  • Yari, Sh. Applying fuzzy logic to optimize the performance of solar air heater with installation of air barriers in cross channel [Volume 6, Issue 4, 2016, Pages 329-341]
  • Yarmohammadi, M.J. Assesing whipping vibration on damage floating life of Catamaran using one way fluid-structure interaction method [Volume 12, Issue 1, 2022, Pages 21-33]
  • Yarmohammad Tooski, M. Experimental investigation of repeated low velocity impact on GLARE with various energy levels [Volume 5, Issue 2, 2015, Pages 43-56]
  • Yavari, R. Output Feedback smooth switching control design for switched uncertain linear parameter-varying systems [Volume 11, Issue 6, 2022, Pages 27-44]
  • Yazdani, M. H. Numerical and experimental fatigue life estimation of airplane emergency door bracket in various mission profiles [Volume 8, Issue 4, 2019, Pages 143-152]
  • Yazdan parast, seyed m.r Design and Implement of Fuzzy control of a Robotic Camera for Target Tracking [Volume 4, Issue 1, 2014, Pages 1-10]
  • Yazdipour, A.R. The effect of interlayer on the microstructural characteristic and mechanical properties of diffusion welding between 17-4PH steel and Ti6Al4V alloy [Volume 12, Issue 3, 2022, Pages 45-56]
  • Yazdipour, A.R. The effect of diffusion welding parameters on the microstructural characteristics and mechanical properties of dissimilar joint between 17-4PH steel and Ti6Al4V alloy using nickel interlayer [Volume 12, Issue 4, 2022, Pages 41-54]
  • Yekani Motlagh, S. Large Eddy Simulation of Three Dimensional Mixed Convection Flow Inside the Ventilated Cavity Containing Obstacle and Extraction of Coherent Structures using Proper Orthogonal Decomposition (POD) [Volume 7, Issue 3, 2017, Pages 199-212]
  • Yoosefi, S. Experimental investigation of effect of inlet direction and height on flow pattern and thermal comfort conditions under personalized confluent jets ventilation system [Volume 11, Issue 3, 2021, Pages 195-205]
  • Yousefi, Ali Numerical simulation and optimization of truck’s cabin strength [Volume 11, Issue 4, 2021, Pages 15-31]
  • Yousefi, P. Solution of the Characteristic Frequency Equations of Levy-type Sandwich Panels with Auxetic Honeycomb Core based on the Improved Reddy’s Third-order Theory [Volume 11, Issue 1, 2021, Pages 291-310]
  • Yousefi, Sh. Experimental and Numerical Investigation of the Effect of Geometric Parameters on Flexible joint Nonlinear Behavior for Solid rocket motor Trust Vector Control [Volume 7, Issue 4, 2018, Pages 197-207]

Z

  • Zahedinejhad, P. Frequency Analysis of Bi-directional Porous Functionally Graded Beams with Variable cross section on Elastic Foundation using Reddy Third Order Shear Deformation Theory [Volume 11, Issue 3, 2021, Pages 97-118]
  • Zahedinia, M. Experimental and Numerical Study of Deformation of FML Plates with the Same Thickness Under Explosive Loading [Volume 8, Issue 4, 2019, Pages 129-142]
  • Zahiripour, Seyyed A. A New Method for Extracting an Optimal Sliding Surface and Its Application to Control of a Quarter Car Active Suspension System [Volume 5, Issue 2, 2015, Pages 1-15]
  • Zahmatkesh, I. Numerical investigation of two-phase nanofluid flow in square cavity with inclined wall under different magnetic field [Volume 13, Issue 1, 2023, Pages 125-136]
  • Zahmatkesh, Iman Entropy Generation of Nanofluids during Natural Convection in Rectangular Porous Enclosures [Volume 4, Issue 3, 2014, Pages 171-184]
  • Zakariapour, M. The alternating magnetic field and convection heat transfer implications for magnetic fluid hyperthermia- A numerical analysis [Volume 6, Issue 1, 2016, Pages 189-200]
  • Zakeri, M. Modeling of Solar Desalination Equipped with Phase Change Materials by Air Humidification and Dehumidification Technique [Volume 12, Issue 4, 2022, Pages 159-174]
  • Zakeri, Mahnaz Annealling Process for Polycarbonate Sheet to Remove the Residual Stresses [Volume 2, Issue 4, 2013, Pages 15-24]
  • Zakeri, R. Simulation of Fixed Two Ends Micro Polymer Chain in Microchannel Using Dissipative Particle Dynamics [Volume 9, Issue 3, 2019, Pages 277-289]
  • Zakerzadeh, MohammadReza Modeling the spall in impact of metalic plates, considering the effects of temperature, strain rate and damage [Volume 5, Issue 3, 2015, Pages 39-50]
  • Zakerzadeh, M.R. Robust estimation of spring stiffness in a Shape Memory Alloy actuator using Extended Kalman Filter [Volume 5, Issue 4, 2016, Pages 69-81]
  • Zalaghi, S. Identification of crack in beams under moving forces using Hilbert-Huang transform [Volume 11, Issue 6, 2022, Pages 173-185]
  • Zamani, H. Experimental Investigation of Indoor Cooking Using an Indirect Solar Cooker Integrated with Heat Storage Materials [Volume 11, Issue 3, 2021, Pages 207-219]
  • Zamani, H. Thermodynamic Analysis of an Evacuated Tube Solar Cooker under Different Operating Conditions [Volume 11, Issue 5, 2021, Pages 259-268]
  • Zamani, P. A survey on processing map for the hot deformation of Copper - Alumina nanocomposites using artificial neural network [Volume 7, Issue 2, 2017, Pages 55-62]
  • Zamani, P. Investigation of Resin Pocket Area Effect on Crack Growth in Foam Core of Composite Wind Turbine Blade by the Finite Element Method [Volume 8, Issue 4, 2019, Pages 27-38]
  • Zamen, Mohammad Evaluation of multi-effect distillation unit (MED) for desalination of Iranshahr steam power plant effluents using heat losses of boiler blowdown [Volume 13, Issue 6, 2024, Pages 89-102]
  • Zameni Mofakham, R. Experimental Analysis on the Geometric Parameters of the Composite Metal Matrix Patch to Repair Cracked Aluminum Part [Volume 11, Issue 3, 2021, Pages 85-96]
  • Zandi, M. Piezoelectric Configurations Effects on Acoustic Energy Density in an Ultrasonic Microcontainer for Preparing Nanoemulsion [Volume 8, Issue 3, 2018, Pages 15-28]
  • Zandi, M. Enhancing the performance of Bi-stable Energy Harvester using Chaos control [Volume 11, Issue 2, 2021, Pages 1-14]
  • Zandi, Seyed M. Shear Behavior Analysis of Steel Plate Girders with Local Corrugated Web under Monotonic Loading [Volume 8, Issue 3, 2018, Pages 77-90]
  • Zandi Baghche Maryam, A. Analysis of FGM Rotating Disk Based on Non-Fourier Heat Conduction Model under Electromagnetic Field [Volume 11, Issue 4, 2021, Pages 53-70]
  • Zandrad Mojarad, M. The Calculation of Trimaran Vessel Resistance and Uncertainty estimation in Calm water condition by Experimental and Numerical methods [Volume 11, Issue 6, 2022, Pages 253-271]
  • Zanganeh, Roohollah Axial Vibration of a Rod with Viscoelastic Support [Volume 3, Issue 1, 2013, Pages 67-79]
  • Zardst, Aidin Kinematic and inverse kinematic analysis of hybrid Delta parallel robot with spherical wrist using Adptive Neuro Fuzzy Inference System [Volume 12, Issue 5, 2022, Pages 13-30]
  • Zare, J. Frequency Analysis of Vortex Shedding in Cascade of an Axial Compressor in Moderate Reynolds Numbers [Volume 6, Issue 1, 2016, Pages 19-27]
  • Zare, V. Numerical Analysis of Various Nanoparticles Size Effects on Thermal Performance of Nanofluid in A Microchannel Heat Sink [Volume 6, Issue 4, 2016, Pages 275-284]
  • Zareei, H.R. Numerical simulation of Lucid spherical turbine and investigation the effect of different parameters of blades on its performance [Volume 12, Issue 1, 2022, Pages 115-131]
  • Zarei, H. R. The effect of aluminide coating on the creep life of Rene 80 nickel base superalloy [Volume 11, Issue 2, 2021, Pages 145-156]
  • Zareinejad, M. Mass Detection by Theoretical and Experimental Frequency Response Analysis of Bending Piezoelectric Actuators [Volume 9, Issue 4, 2019, Pages 27-39]
  • ZareiNezhad, M. Hydraulic Hybrid Propulsion System Design and Simulation [Volume 12, Issue 2, 2022, Pages 1-12]
  • Zare Mehrjardi, M. Investigation of Stability of Noncircular Lobed Journal Bearings Lubricated by Ferrofluid [Volume 7, Issue 2, 2017, Pages 165-177]
  • Zare Mehrjardi, M. Effect of Shell Surface Texture Depth on the Steady State Performance of Noncircular Two Lobe Gas Journal Bearings [Volume 11, Issue 6, 2022, Pages 273-286]
  • Zare Mehrjardi, M. Effect of Using Nano Lubricant Containing TiO2 Particles on the Performance of Noncircular Two Lobe Journal Bearings [Volume 12, Issue 3, 2022, Pages 103-116]
  • Zare Mehrjardi, Mahdi Effects of design and lubrication parameters on thermo-hydrodynamic performance of noncircular three lobe journal bearings with micropolar lubricant [Volume 6, Issue 3, 2016, Pages 79-96]
  • Zare Mehrjardi, Mahdi Solving the inverse problem of identifying internal boundaries and estimating the mechanical properties of materials using optimization methods in materials with variable modulus of elasticity [Volume 13, Issue 2, 2023, Pages 27-39]
  • Zare Mehrjerdi, M. Effects of Design and Assemble Parameters on Performance of Micropolar Lubricated Noncircular Lobed Journal Bearings [Volume 1, Issue 2, 2011, Pages 13-25]
  • Zarenejad Ashkezari, A. Modeling and Prediction of Fuel Consumption and Emissions of Direct Injection Diesel Engines using Artificial Neural Network by Applying Control Parameters of Engine Speed, Fuel Mass and Inlet Air Temperature [Volume 10, Issue 2, 2020, Pages 237-251]
  • Zargoushi, A. Experimental Study on Heat Transfer of Water/TiO2 Nanofluid in a Straight Tube with Twisted Tapes at Constant Wall Temperature [Volume 5, Issue 3, 2015, Pages 165-172]
  • Zarif, F. Noise Removal from the Vibration Signals of the Rotating Machinery Using the Empirical Wavelet Transform and the Conventional Thresholding Methods [Volume 9, Issue 1, 2019, Pages 111-124]
  • Zeighami, E. Flexural Behavior of High Performance Cementitious Composites Reinforced With Hooked Steel Fibers [Volume 5, Issue 3, 2015, Pages 125-136]
  • Zeighami, V. Bending of functionally graded carbon nanotube reinforced composite plates using dynamic relaxation method [Volume 5, Issue 1, 2015, Pages 115-133]
  • Zeinali, M. Sensitivity Analysis of Maneuverability of an AUV to Added Mass Coefficients Variations [Volume 9, Issue 2, 2019, Pages 1-13]
  • Zeinaly, Zahra Time-varying delay compensation by communication disturbance observer for teleoperation system by considering model uncertainty [Volume 4, Issue 4, 2015, Pages 143-156]
  • Ziabasharhagh, Masoud تایپ آوانگاری مجاز است فارسی انگلیسی فرانسوی Numerical simulation and analysis of Beta type stirling engine thermal and hydraulic losses with moving regenerator [Volume 2, Issue 4, 2013, Pages 47-60]
  • Ziaei-Rad, M. Study of porous media usage in the performance of tubular heat exchanger in Continuous hydrothermal flow synthesis method [Volume 5, Issue 4, 2016, Pages 177-186]
  • Zia shamami, M. Experimental and Numerical Study of Deformation of FML Plates with the Same Thickness Under Explosive Loading [Volume 8, Issue 4, 2019, Pages 129-142]
  • Zia Shamami, M. Experimental and numerical study of core and face-sheet thickness effects in sandwich panels with foam core and aluminum face-sheets subjected to blast loading [Volume 8, Issue 3, 2018, Pages 91-106]
  • Zia Shamami, M. A review on the underwater explosive forming [Volume 11, Issue 6, 2022, Pages 59-83]
  • Zia Shamami, M. Experimental and numerical evaluation of energy absorption capacity of sandwich panel with polyurethane foam core reinforced with mineral pumice under explosive loading [Volume 12, Issue 4, 2022, Pages 27-40]
  • Zienali, M. Experimental and Numerical Investigation of grooved shroud Effects on Tip Leakage Fluctuation in an axial compressor [Volume 7, Issue 4, 2018, Pages 267-278]
  • Zirak, S. Numerical Investigation of the Effect of Sinusoidal Pulsating Cooling Air on Film Cooling Effectiveness of Leading Edge, Pressure and Suction Side of a Turbine Blade [Volume 9, Issue 2, 2019, Pages 227-247]
  • Ziya-Shamami, M. Experimental investigation of large plastic deformation of single- and multi-layered circular aluminum plates under repeated uniform impulsive loading [Volume 11, Issue 1, 2021, Pages 123-137]
  • Z. Moghaddam, naser Using isogeometric method for dam break modeling by Lagrangian approach. [Volume 4, Issue 3, 2014, Pages 45-55]
  • Zoghi, M. Parametric analysis and optimization of a ground source heat pump with economizer [Volume 6, Issue 1, 2016, Pages 215-224]
  • Zohourmesgar, M. Optimization of ultrasonic transducer horn geometry with vibrational-thermal performance improvement approach [Volume 11, Issue 1, 2021, Pages 31-42]
  • Zolfaghari, Alirezaَََ Experimental investigation of effect of inlet direction and height on flow pattern and thermal comfort conditions under personalized confluent jets ventilation system [Volume 11, Issue 3, 2021, Pages 195-205]
  • Zolfaghari, A. R. Influence of air inlet diffuser layout on indoor air quality and occupants’ thermal comfort in a room with baseboard heating system [Volume 6, Issue 3, 2016, Pages 261-270]
  • Zolfaghari, A.R Analysis the influence of air outlet opening’s location in an industrial environment with high temperature radiant heaters on uniformity of thermal conditions and distribution of the contaminant in presence of asymmetric flow field [Volume 6, Issue 3, 2016, Pages 249-260]
  • Zolfaghari, A.R. Reducing the undesirable effects of thermal asymmetry for a bus passengers by using airflow asymmetry under summer conditions [Volume 8, Issue 1, 2018, Pages 135-146]
  • Zolfaghari, A.R. Effect of using phase change materials in protective clothing on human thermal comfort under extreme cold conditions [Volume 7, Issue 4, 2018, Pages 239-249]
  • Zolfaghari, A.R. Enhancing the performance of checkerboard Thomas method by using shared memory for solving the heat transfer problems on GPU [Volume 8, Issue 3, 2018, Pages 303-314]
  • Zolfaghari, M. Experimental analysis, mathematical modeling and Sobol sensitivity analysis of surface roughness in orthopedic milling process (polymethylmethacrylate) [Volume 11, Issue 1, 2021, Pages 139-152]
  • Zolfaghari, Mojtaba Numerical and experimental study of orthogonal cutting bone using elastic-plastic material model and dynamic damage model [Volume 12, Issue 6, 2023, Pages 49-65]
  • Zolfaghari, Mojtaba Investigating factors affecting electrode wear rate in electrical discharge machining of AZ91 magnesium alloy metal matrix composite reinforced with silicon carbide microparticles [Volume 13, Issue 4, 2023, Pages 119-134]